Search the Community
Showing results for tags 'arm'.
-
Hello, I want to buy a rain cover for my Pro Titan Arm. If possible in Europe. (I'm located in Luxembourg) Thank you Greetings Oli -
Hello, I want to buy a GPI Pro titan arm rain cover. If possible in Europe. (I'm located in Luxembourg). Thank you
-
[Complete Steadicam System] The time has come for me to part ways with my starter steadicam rig! I bought the system about 2.5 years ago and it has done me well. The arm was recently serviced by Tiffen. The sled recently serviced electronically and mechanically by Terry West and Robert Luna so it is up to specs! This is a fantastic starter package for someone looking to get started with a pro rig. Sled, monitor yoke, dock, and various bits and pieces come in a standard production hard case. Included is a universal mounting plate. The sled is all upgraded internal HD and 24/12v internal power wiring. There's also an analog BNC and HD BNC that runs through the system. 2 Anton Bauer battery mounts have been added as an upgrade to the sled for power. Cam jam monitor arm with yoke is a must have. Has greatly helped with my rig balancing and switching back and forth from low mode. You simply just flip the monitor and it doesn't change anything with the rig's balance. The yoke fits pretty much any monitor you'd want to put on it, but additional spacers may be required to fit the different monitors out there. I have spacers for a SmallHD DP7 that I will include. Most will say the Master Series sled doesn't fit onto the IIIA arm, and you are right! Luckily I got a new post from Robert Luna that makes the 2 compatible. Works flawlessly. Ultra II vest shows some signs of regular use, but is still in great working condition. Safety release works perfectly, socket block is undamaged. Bartech analog unit has been fantastic. Includes a hand unit, receiver, motor, and various power cables, motor cable, etc. Anton Bauer LP2 Dual Gold Mount charger with 2 HC Dionic AB batteries. Both were recently sent back to Anton Bauer to get re-celled. The batteries are in perfect working order. See below for a list of what's included. There are a few things I didn't talk about here. Included: -Master Series upgraded HD sled -Docking bracket -Low mode bracket -Camjam monitor arm with yoke -Various BNC cables, tools, miscellaneous bits and pieces -Hard case for the sled, docking bracket, cam jam monitor arm and yoke -CP IIIA arm -Allen wrench for adjusting the arm tension -Rain cover for the arm -Master Series sled compatible post for IIIA arm -Long post -Bag for the arm -Ultra II vest with socket block (can be switched to either side of the vest) -Soft bag for carrying the vest, arm, rain cover, and Mitchell hard mount -Mitchell hard mount -Bartech analog wireless follow focus receiver -Bartech hand unit -Wireless follow focus motor -15mm rail adaptor for motor -Power and motor cables for Bartech -Bartech system carrying case -Anton Bauer LP2 dual gold mount charger w/power cable -2 HC Dionic AB batteries Total is $24,400 This is practically everything you need in order to get operating. It's also a fantastic back-up rig. Please contact me if you have any questions. Buyer pays shipping costs, PayPal (or any other money transfer) fees. I'd prefer to do this over PayPal. Bill of sale will be sent to buyer. If you refer someone else (who actually ends up buying the system, that is) I am willing to pay you $300. So please refer! All pictures are of my equipment. No stock photos or anyone else's gear other than mine pictured. Photos (including photos of the Bartech): https://flic.kr/s/aHskR4sU77
-
The package is worth over 30k new. It's only at $2000 in the bidding with buy it now at 10k and less than 24 hours to go. its about to end on ebay: http://r.ebay.com/R7oziP Thanks Tyler
-
Full Glidecam Gold Rig upgraded for HD-SDI by Glidecam in Massachusetts. Sled with Anton Bauer battery plates, two monitors,3 types of low mode-f bracket and 2 S hooks, camera cage, two camera plates, dual battery charger, all kinds of cables nuts and bolts and backup replacement parts. Gold Arm very smooth and capable of flying DSLRS to full size film and Digital cinema packages Vest Sled Stand Hill Docking Bracket Does not include the magliner and post (just used it to display the rig and take pictures) customized pelican 1650 rolling case pelican 1610 rolling case The entire rig fits neatly in the two pelicans for travel. Sled has both 12 and 24volt capabilities for flying various camera systems. Has Red and Arri power cables or XLR for any camera out there. I had the entire rig looked at by Glidecam recently when I had it upgraded. The Technician told me it was the cleanest, well maintained rig that has come across his bench. This really is a nice smooth and comfortable rig for anyone looking to get into steadi or as a backup rig. Thank you Total Price $10,500 Tags: Arri camera Optimo Angenieux cooke zeiss moviecam camera arricam Panavision Red camera canon lenses motion picture lenses motion picture cameras oconner head steadicam glidecam remote head remote camera follow focus digital motion picture cameras HD cameras High Definiton camera digital video Alexa camera red epic red one red mx canon 5d mark ii Panasonic varicam sony f35 sony cinealta jvc camera 3D camera
-
Wanted: PRO 3" monitor arm extension please reply at dickcrow@gmail.com
-
Great rig bought in late September of 2011! Kept it around as a backup/running rig with my G70x arm, but now selling it to buy more accessories for my Ultra 2. Besides a couple aesthetic scratches, a couple tape marks, and a little dust in the hard to clean spots, it's in great working condition. Zephyr HD Kit (V-Mount): Rolling Hard Case Sled Arm (used only for a few months) Vest Weights Docking Bracket Second Battery Mount Low Mode "F" Bracket 6" Arm Post for a G70x/G50x arm to the Zephyr Sled Socket Blocks for both the Zephyr Arm and a G70x/G50x arm With the extra Arm Post and Socket Block, you have the option of using the Zephyr Vest and Sled with a better Tiffen Arm. Please ask if interested in a Pelican Storm case, cables for this set up, or buying everything except the vest (if you want to use your own vest). Price for all: $8,750 Happy to take/send more detailed photos on forum or through email. Please feel free to contact me with any questions. All the best, Richard Volsky rkvolsky@gmail.com Atlanta, GA
-
MK-V Nexus (4)-Stage Deluxe 2" Post V2 Advanced Gimbal w/Standard Handle Evolution D-Box Evolution J-Box Standard Topstage V2“ Docking Station Dual Battery Mount for Anton Bauer Single Battery Mount for Anton Bauer Nexus base system Soft Case Monitor Transvideo 6.5" 16:9 Superbright LCD monitor Hard case Cable pack Arri 12V Cable 30" Lightweight 36" BNC 48" Monitor Cable (Pro Comp.) 2 x monitor power cable Batteries 3 x Anton Bauer Batteries PL-5680 4-way charger Arm Silverrig Silver Spring Arm (range 13-63 lbs) Speed Crank tensioning tool Arm post Arm Bag All equipment is in superb condition and never hired to others. It is a complete system. This Nexus has been a reliable & trustworthy rig. The electronics are rock-solid, the gimbal super-smooth. Ideally I would like to sell the package complete. A Steadicam Gold vest will be added for free on top as it has a crack, but still can be used. Equipment is located in Austria (AT), buyer pays shipping costs. Package asking price: 16'150 Euro Only serious offers! contact: paul.horatschek@icloud.com Click on the links for more photos!
-
HI I'm steadicam operator in korea, I have master arm, 3A arm(blue), but I want to exchange(include additional charge) or buy G50x arm, so... if have interest about it, please tell me Thank you for your attention and I'll wait reply! -
G70-X Arm for sale. £11,000 (+VAT). OBO. Excellent condition arm, comes in a custom fitted Peli Storm iM3100. Includes regular G70 arm post, arm tool, 1/4" Allen key, and an arm-post adaptor for the 3A gimbal. Also has rain covers. Serviced by Optical support just before Christmas 2016. No maintenance required - simply got cleaned. Looked after like my first-born with only a couple of cosmetic blemishes. Purchased directly from Tiffen UK end of 2013. Located in London UK, but can often be found frequenting pubs in the Gloucester/Bristol area. Shipping is your responsibility!
-
Used Tiffen Archer2 Sled and G50 arm with extras for sale-- $20,000 USD + Shipping Will not break up package. Located in NYC. Matt@NYSTEADI.COM Kit List: (1) Steadicam Archer2 Sled Anton Bauer with Folding Base and 700 nit Marshall Monitor (1) G50 Arm with X upgrade (2) Docking Brackets (2) Dovetail Plates (1) Low Mode F Bracket (1) 6in Arm Post (4) 1lb threaded weights (2) Monitor Power Cables (1) Live Tally Sensor and Cable (1) Tiffen Live Return Monitor (2) Return Monitor Power/Video cables Cable Package: (1) 4pin XLR (1) ARRI 24 VOLT ALEXA/FILM (1) ARRI 12 VOLT ALEXA (2) AMIRA/ALEXA MINI 24 VOLT (1) HIROSE TO FEMALE PTAP (1) RED EPIC POWER (1) RED-ONE POWER (1) DECIMATOR POWER (1) BARTECH POWER (2) MODULUS POWER
-
Hi all, I bought a brand new Titan Arm last summer. After 10 weeks shooting in Morocco, it needed to be cleaned up. When I built it back after cleaning, and screwed each canister in his bone, I've seen some trouble with 2 of them. On both higher and lower section of the arm, the upper canisters are jiggling. Before that, they always had been stucked in place, no jiggling. Of course I've tried different canister in different arm section. It's always the upper canister that is moving. I can't find a way to fix this. Any idea's welcome! Thanks!
-
Hello, I'm selling my backup black canisters. Located in Spain Brand new 2x black canisters (never used). New style without window. Buyer pays shipping. (2,400USD or 2.200€) Regards
-
Up for sale is my G70X arm. Bought in 2015 and used twice. It's in perfect condition. Comes with arm bag and post. Asking $14,500. Call me with any questions @ 818.355.5885 or email me @ rglehman@me.com -
Hey! I'm looking to buy my first "real" big-rig. What I'm searching after is an EFP sled or a complete rig! Let me know if you have anything I'm looking for! Thanks! -
G-70 for sale. In a very good shape. Went on a little trip to Steadicam London last winter. They changed the arm post barrel, fixed the arm to vest connector and checked everything (and I checked them like 1000$ ;-) Sold with original rain covers, bag, and a brand new low-mode bracket I bought a few month ago (another 500$) Asking 11000$ Located in Paris, France. Buyer pays shipping.
-
Hi, I own a G-70. I've worked a lot with Titan. I usually fly typical Alexa setup on my Ultra2. When operating with Titan arms, my arm post can rotate totally freely if I unscrew the locker. Whereas, with G-70, it looks like I can't get it as smooth and free. My G70 forearm always want to go in the same line as the handle. To do so, it litteraly pulls the armpost away from my body (hope my english is good enough so that you guys can get what I mean ;-) Besides, with the G-70x, this doesn't seem so accurate, and it feels way better than the G-70. I love to work with a totally free post, the sled feels way easier to move around, with a light pull in I can see my monitor,... As any of you ever noticed this move in the Tiffen arms? Is there a way to avoid this?
-
I'm selling my EFP red spring arm. This arm has a lift capacity of about 16-40 pounds. Asking $3,625 Attached Images
-
STEADICAM BROADCAST MASTER FOR SALE
ALLAN BARRETT posted a topic in Steadicam Marketplace - For Sale
Steadicam Broadcast master Sled, Vest, Arm, Stand for sale in good working condition with green widescreen monitor and HD to SD converter. All in original casings. Complete £8,000. -
GPI PRO Altas Arm Chassis and a set of Grey canisters. Great condition just a few cosmetic marks. Had this up earlier but got busy and used it on a few gigs. Ships from Nashville TN. I can get you a quote with discounted Fedex Shipping. Atlas Chassis [2] Grey Canisters Small tub of Renolit ST-80 Lithium Grease [for lubing draw bars and canister pins] New 5/32 Allen Key Spare Parts [2] Arm wrenches New Arm Soft Case Standard 4" Post and docking Collar [can supply Archer diameter adapted post if requested] $9,300
-
Hi all Steadyrig Silver spring arm for sale. As you knows well, this is come from down there Hugo, nice craftship and good customer response. It's 13~63lb payloded to working between DSLR and fully loded Alexa Works fantastic by cost effectivity Male Steel socket block was changed to toolless block. What you see is what u get. Silverarm, 3/16 allen, speed crank handle(Hill products), 10" arm post, 12" arm post /w collar,padded arm bag 6800USD + shipping (ships in solar system) Email me at steadi7 at naver.com
-
Hi guys, How are these arms ? Has anyone tried them? How do they perform ? http://www.easysteady.com/cineseries_arm_it.html http://www.steadicamproline.com/#!arm/cnu0 Thanks Vahe
-
For sale my backup 3a arm. Its in great condition. It was remade by Robert Luna two years ago and never used scince. price is 4500$.
-
Well, the time has come to part ways with my love! I'm selling off all my steadicam kit. I've throughly enjoyed myself but work has me in a different direction and it's pointless having all this kit sitting in boxes. I'm selling my Glidecam GOLD 2inch post sled, arm and vest along with all the other bits I have kicking around. Also selling my Bartech system in a seperate ad. I did mostly live tv work and commercials, this rig has been a killer system, I'll miss her. Here is a link to the official Glidecam site for all the specs and tech talk: http://glidecam.com/product-gold-sled #NOTE# My sled has the 'anton bauer' base with V-Lock plates. Included in sale: SLED (HDSDI internally) ARM VEST Docking bracket (no stand) 2 x pelican 1650 cases. The sled case has a removable lid for tools and spare bits. Everything in the photo is included, tools, cables, talley light etc - (the two blue cases aren't included, they are part of a Vocas kit, I just forgot to take them out for the photo!) Blue wedge plate with Sony VCT plate Jerry Hill hard mount - BRAND NEW, never used Spare vest ratchets NEW x 4 Spare yellow wedge plate Triax header cable 2 x extra docking stands - I used on on my magliner Marell 3 way bubble with elastic strap Low mode cage Padded arm bag Collapsable wind break, custom made with clear viewing panel Extended post for arm - get that extra length you've always wanted Tally for Sony cameras - use the viewfinder plug various BNC cables and a sled to 4pin XLR cable for monitor I'm throwing in a Marshal 7inch LCD. I think this monitor is a piece of crap but I have no use for it so I'll chuck it in. It'd be fine to throw in the kit as a back up but it's only good for indoor situations. (piece of shit!) My heart breaks a little to see her go but it's time. Kit is located in LA and can be viewed in person. Let me know any questions you might have, leigh@loosecannon.com.au Thanks. PHOTOS: http://losangeles.craigslist.org/sfv/pho/5611611617.html $8000
-
I currently have a working sled from CAME-TV. I've been wanting to upgrade to the full Zephyr but just can't afford the entire rig so I'm thinking of just buying the arm and vest for now and upgrade in the future. Offers and advice are welcome!
