Search the Community
Showing results for tags 'arm'.
-
I am selling my backup arm. It is an EFP red spring arm in very nice condition. This arm has a lift capacity of 16-40 pounds. Here is the list of maintenance that has been done to it: - The arm covers have had a couple small dents straightened and they have been powder coated. - The rubber bumpers on the center joint are brand new. - The screws that hold the arm covers and bearing pins have all been replaced with black oxide coated stainless steel screws for low maintenance. - The tension screws have been replaced and the new ones are slightly longer than stock so the arm can be tuned a little lower than the stock configuration and it is easier to disassemble the arm for cleaning. - The spring stops have been upgraded to 4-40 set screws (The originals were the older style dowel pins that were very hard to remove if you wanted to clean the arm) Asking $4,300
-
Hey everyone! A little piece of info that maybe some other up and comers like myself should know... I'm sure it's floating around deep in the forum somewhere Tiffen arms have some play (about a full 1/2 inch) in the pro socket blocks to the point where you can not use them with your Pro Vest unless you have a Tiffen socket block. O'Shea and I stumbled upon this little discovery yesterday. Could have been a disaster discovering this on a job... Does anybody know why this is? Very interesting. And is there any way to keep the Pro socket block on the Pro vest and use a Tiffen arm? Hope everyone is doing well! Cheers
-
Hey folks I'd love your opinions on the pros and cons of the Pro Titan Arm versus the Tiffen G-70x. I am about to purchase my first arm, its a big investment so I'd like to make use of the knowledge within this forum. I have tried both arms but not to the extent where I could make a decision. Many thanks, Greg
-
Hey fellow ops, im planing to buy Gpi pro Titan arm with 4 canisters after selling my G50.I want to fly from small cameras like dslr to heavy cameras like alexa with all accessoires. Which 4 canisters do you advice to buy 4 blues? or 2 blue 2 blacks. I just can afford for 4 canisters not more. i know having them all is a great idea since they sell it for higher price if i decide to buy them seperately later on,and i also saw the weight chart on their website. just want to take some advice from fellow operators who use the arm, and are experienced. Thanks
-
Hello, For sale is a Steadicam Zephyr HD AB sled, with original arm, vest, HD 7" and rolling hard case. This item is in beyond good condition, a few minor scratches just from casual use. It was purchased by me from B&H at the end of June of 2014, and I can count on two hands the number of times it has been used. I am based out of Metro Detroit and willing to ship lower 48(shipping is on me), as well as be available for local pick up. I am looking to get $6,500 OBO for it as it's still under two years old and is in pristine condition. Below is a list of included items as well as photos of the rig. You can contact me by email at ab@brighterflight.com Steadicam Zephyr telescoping centerpost/sled Adjustable iso-elastic arm w/slip cover for storage Steadicam standard vest Anton Bauer gold mount battery plate Dovetail plate Steadicam rolling hard case Docking bracket 4 middle weights 4 starter weights All necessary power and BNC cables
-
Red Spring Arm. Fully serviced in July 2013 by Brain Busby (Bees). New bearings, cables and screws. Excellent mechanical condition. Cosmetically there are dents in the arm casings and wearing on the edges in line with the arm's age. £2200. I am open to offers & part exchange. cheers.
-
Hi Guys, I'm selling my 3A Arm. It is smooth and well lubricated. The Price is $3,750 plus shipping I would prefer local pick up but i will ship it. I'll consider all offers.
-
Im noticing after a show in the desert, my arm could use a little tlc. I was planning to order some acf-50 for a few parts that are looking a little rusty, and take the shields off and wipe everything down with a paintbrush. Is there anything else you would recommend doing to upkeep the arm? I imagine some of the bearings could use some grease, but I'm not sure which ones and what type to use (white lithium?) Thanks
-
LUNA ARM: Bought directly from Robert Luna. This arm has a range from 15lbs to 70lbs Ideal arm for starting out. Bought it for $10,500 selling it with three post for $8,000 or best price. Responsible for shipping
-
Tiffen short post for sale... please make me an offer
-
Flowcine are now taking pre-orders for their new Black Arm. http://www.flowcine.com/content/11-black See it in action on the Optical Support Mantis Rickshaw here: https://www.youtube.com/watch?v=wySDakyGgvc You can pre-order through OS by emailing info@opticalsupport.com, or through the flowcine website if you're outside of the UK.
-
Hi chaps, My Ultra 1 is up for sale. I'll be sad to see this one go - it has been my one and only rig for two years, and has never let me down. As you might expect there are some minor cosmetic marks in places like the arm covers or the vest's fabrics, but functionally everything is rock solid and flies smooth as butter. 24V or 12V power comes from V-Locks (not included), which means you can power any camera from the top-stage (cables for Alexa or XLR4 included, amongst others), and the HD-SDI cable I slipped and secured down the post in the beginning has never failed. I'm throwing in a venerable Transvideo Rainbow (SD) monitor, but you'll certainly want to make use of that HD cable at some point! The tilt-stage (un-motorised) and four-stage post are frequently useful features which I'll miss in my next sled, and the tool-free Master/Ultra arm will be difficult to top, honestly. So to sum up, the package INCLUDES: Ultra 1 Cine Sled (HD/V-LOCK/24V/Four-stage Post/Tilt Stage) Ultra 1 Arm (inc. 6" and 12" posts) Ultra 1 Vest Hill Dock Transvideo SD Monitor, Mounting Bracket Dovetail Plate, Power Cables, Video Cables etc. ASKING PRICE £12,000 (no VAT charged) EU delivery at buyer's expense, local pick-up in West London more than welcome. Contact me at emilio dot film at gmail dot com anytime if you'd like to make an offer, simply to have a look at the rig, or just for a chat. All the best, Emilio
-
Hi everyone! I am desperately looking for a good vest and arm. It should carry up to 80lbs max! Its urgent! Thanks
-
Hello, I have on old Masters vest and model 2 arm that I have no use for. While still funtional, they show their age and need some TLC. If anyone has any interest, please let me know. I am open to reasonable offers. The equipment is located in Indianapolis, IN. Thanks for looking. Caleb Fischer Caleb867@gmail.com 260-402-3611
-
Is anyone interested in an old CP 2A? (Serial # 42) It was my first arm 7 years ago. I was told that it was serviced by Luna before I aquired it. It has not been serviced since. It has been shelved for three years. Caleb
-
Hello, I'm looking for a cheap, maybe used, vest and arm kit. i can pay 100-200 usd. please contact me if you live in the moscow area, or are able to ship to moscow. Contact me at powerhousemotiongraphics@gmail.com
-
Hello, i was wanting to know if you guys could help me find an arm and vest for $140usd as my rig is almost 10 pounds and it is getting really hard to operate smoothly with all that weight. i can pay only through paypal. Thanks!
-
$2000 USD OBO I am upgrading so I am offering up my old arm for sale. This is a 3A style arm. but not an official 3A arm. I’m not sure of manufacturer. 40lbs capacity I have however used this arm for over 2 years, and it has worked well for me but I find myself needing a larger payload capacity. I had this arm looked at by Robert Luna in Nov. 2015 and he told me that true max weight was 40lbs. note that the indicators on the arm show a 55 lb max. I don’t want to mislead anyone. this arm will only support 40lbs despite what the indicators on the arm covers say. There is some wear on one of the pulleys (see pic). This was from the previous owner, has looked exactly the same in the 2+ years I’ve used this arm. Not sure how it happened but it doesn’t seem to be causing any problems. Anyhow. what you see is what you get. This was a great stepping stone arm for my first rig. I’ve flown F55’s with canon cine zooms with this. As well as many Red packages and smaller setups. Hopefully it can fill that same role for somebody new, who needs a mid capacity arm without a high price. Cheers
-
Parting with my Tiffen Master Series Arm. Flies beautifully and only selling to make room for upgrade. Minor cosmetic damage on top arm covers, but nothing that affects the operation. Comes with: - Tiffen Master Series Arm. Serviced in 2010-2011. - 1x 5", 6", 9.5", and 12" Master to Pro (3A/Sachter/MK-V) Posts. Made from Aircraft Aluminum - 1x 5" black Tiffen Post - 5x Additional Shaft Collars included - Several Thrust Bearings and washers for slicker arm post movement - Large Husky Pouch for Additional posts and collars - Canvas/Cloth Rifle case for Arm Asking Price: $7,000. **Will Also entertain offers on Gear Trades. Feel free to E-mail, Call or Text me for more information.
-
I know this has been asked before in this thread, but it has since been locked and is quite old so I don't know if the info is still accurate. Does anybody know the best way to contact Robert Luna (is he still working?). I have an old 3a arm that I am looking to get refurbished / upgraded. Thanks! -
Steadicam 3A arm for sale. Fully re-furbished by Robert Luna in 2014, cost $2000usd. Its been my main arm for the past 5 years, I've kept it lubricated and cleaned regularly. It's in really great shape. Comes with custom soft bag. Ser# 617 Asking $5000usd Email me sasha.proctor@gmail.com
-
I purchased an Ultra arm without an arm to vest connector and the incorrect post size. I need the arm to fit my Proline system which is the same dimensions as GPI Tiffen carries the pieces but I'm looking for used parts. Arm to vest connector part #: 078-2078 .625" post part #: 800-7204-03 Post clamp part #: 250-7211
-
Hi Guys, I'm exited to share that the NBStabilizer Arm stock is about to be ready, and will be presented at the NAB show. The Arm weights only 2.6Kg (5.7Lb) Weight range: 0-28Kg (0-62Lb) - No minimum weight required Boom range: 80cm (31.5 inch) I'd be happy to answer questions. Will update soon regarding the booth location.
-
Steadicam Master Series Arm with soft bag. Used but still in good shape. Asking 4500$ + shipping
-
Hello, looking to Frankenstein a Steadicam Ultra Arm I bought used and serviced with Mr. Luna. The arm didn't come with an arm-to-vest socket block so I need to buy one or make one. I have a Proline Vest which has the same connector size as the GPI Pro vest. The post is .750" and I need .625" to fit my Proline sled gimbal. And I would like the option to have one long post that I can adjust for different subject's heights. Thoughts or ideas? I attached photos of the arm.
