Search the Community

Hi all, I'm selling my XCS monitor bracket. Very versatile, in great shape. It comes with extra long rods, in case you have a light monitor and/or you like it far out. Asking 550£ + Shipping worldwide, ship at buyer's cost.

Both motors and accessories are in perfect working order and in very good cosmetic condition. Low hours on the motors. They have never been sub rented, well looked after and I'm the original owner. - 2x DM-2 Digital Motor with 15mm rod & 0.80M output gear .25" wide accessories: - 0.80M output gear .50" - 0.80M output gear .25" - 48 pitch gear PV Zoom - 64 pitch gear PV Iris - 0.60M gear Fuji Video - Focus, Zoom - 0.50M gear Canon Video - Focus, Iris, Zoom - 0.40M gear Fuji Video - Iris ------------------------------------ - 2x PAM Mount w/19mm arm, rosette, D-clamp - 1x PAM 19mm arm, (6" Long) - 1x PAM Offset - 3x Reducer 19mm to 15mm (blue) - 2x Reducer 19mm to 5/8 (red) NEW $7084 USD Asking $5500 USD or €4210 Euro I'd prefer to sell this as a set! Buyer is responsible for shipping! Pictures: https://www.dropbox.com/sh/3omge3un3rt8j1r/HG0AXWdgU2

Bought for £300.00 in 2007. Very rarely use it now so thought I would give it a good home. A few minor scratches from being in a case with a k clamp but that's it- as good as new. Blue anodized Machined steel with internal rubber pads to protect the camera handle. Screws captive on one side but can be undone. Takes seconds to attach to a standard Steadicam plate. Comes with the usual caveats about over tightening on a camcorder handle. Go easy! £150.00 + shipping. Please call Joe on +44 7791212263 or email joe@joebullensteadicam.com in the first instance. Thanks for looking.

I just wanted to share my last creation for my Zephyr. A recorder mount on the battery hanger to place my Hyperdeck Shuttle. I used to place it under the post, where the second battery should go, but I wasn't satisfied. This is a first prototype made with what I could find in my local hardware store, an alluminium 3" L bar a few screws, a hack saw, a metal file and a drill. Feel free to share if anyone has an idea to improve it (and I know there is a lot that could be done)

Here are some images and the latest design/info for our new TwinArm SteadiCam Monitor Mount. The goal was to mount the 10” Transvideo monitor and its yoke to the post clamp at its balance point. Mounting the monitor at its COG allows the operator to change the viewing angle including the yaw angle without affecting SteadiCam rig balance. The design allows full adjustment of the monitor to improve counterweight effect and viewing position, it includes our custom monitor yoke that mounts onto monitor balance point. The yoke is machined to achieve balanced side to side for the perfect COG mount. The TwinArm shown is mounted via its top bar to the ¾ key pocket on the post clamp. The mount's top bar can also be adapted to mount to most any post clamp. For low mode, turn the unit on the quick-release post clamp. The monitor can easily be removed for transport in its own case. Unlike other systems that change the yaw angle at the spigot/bridge-bracket or at the center post, we allow adjustment of the yaw angle at the base of the yoke and eliminate the weak mounting point at the spigot altogether. Spigot mounts that will not lock in place are known to spoil the balance of the rig when the monitor gets bumped. TwinArm features: - full flexible adjustment and positive locking with Upgrades Innovations ball-loc system at any adjustment point. - changing the yaw viewing angle at the monitor base and not at the post keeps the weight shift to a minimum. - scissor motion of the TwinArms lets you move the monitor not just up or down but also in or out to decrease or increase your panning inertia when needed. - Full pivoting monitor and yoke about vertical and horizontal axis for optimum monitor view. - For mounting your monitor with the yoke onto a camera, all you need is our 15mm Ball-Loc Clamp # 11856, it accepts a 15mm stud/rod. Alternative options are a 15mm stud or a 5/8 spigot adapter at the yoke base, which also has a 3/8 thread (offset by 1.3”) - weight: 600g without the post clamp. (post clamp add 75g) Rudy Voser rudy@upgradeinnovations.com www.upgradeinnovations.com

Snapped a pic of this old docking bracket made by Cinema Products and named the West Docking Bracket, after Terry West.