Search the Community

Hi everyone I'm selling my ARRI Artemis Camera Power Lemo 1S 3pin to 4pin XLR 12V cable, which can be used with the Artemis CineBroadcast and the Artemis EFP Rigs for video cameras, ARRI SR I, SR II or AATON. It has never been used so it's brand new. Buyer pays for shipping and money transfer fees. I'm asking 80 Euros. Cheers

Hi everyone I'm selling my ARRI Artemis Camera Power Lemo 1S 3pin to 2pin Fischer 24V cable, which can be used with the Artemis CineBroadcast and the SRH-3 head for ARRI SR III, LT, 435, 535 cameras. I've used only a couple of times, hence it's in pretty good condition. Buyer pays for shipping and money transfer fees. I'm asking 100 Euros. Cheers

Hey guys, I have a custom top and bottom stage on my rig (wired by Terry West), and am wondering if you guys could help me figure out an electrical issue. Before you dismiss me and tell me to take it to Terry, I've been working on this with him also, but figure I'll cast a wide net for answers. The issue is that my camera power has a tendency to drop out, and it seems pretty much at random. Its both the 12v and 24v power. Whats strange is that the power doesnt drop all the way out- it just drops from 14.4v or 24v to about 9v, and will shift back and forth from one to the other, but never anywhere in between or lower. Sometimes this shift is very quick maybe just a few seconds, and sometimes it will be minutes. Obviously this shuts down any camera that is being powered by the rig, so I have resorted to powering things on camera for quite some time while trying to figure this out. I went through and spread the pins on the post (XCS post) to make sure each connection was nice and solid in the post / bottom stage connections, but the problem is still persisting. I'm not really an electrical engineer, so before sending this in to Terry one more time I was going to open it up here and see if anyone has a good idea. Hit me with your best shot! I'm stumped. -TJ