Search the Community
Showing results for tags 'digital motor'.
-
M-One Digital Follow Focus Motor Kit for sale. The Motor and Cable are Brand New (replaced under warranty). The brackets and motor gears have been used about 15 times. Everything is in excellent working and cosmetic condition. I bought a Preston HU/Motor kit so I no longer need this motor. Includes: Rod Collets: 5/8”, 15 mm, 1/2", 19mm w/o a collet. Lens Gears: Module/Pitch 0.8m-32P, 0.6m, 48P, 0.5m, 0.4m-64P, extra wide 0.8m-32P. Mounting Brackets: 19 mm universal mounting bracket, Will mount on either side of motor in either direction. Also a 2.5” universal extension/offset bracket with 19mm attachment tubes (1.12” & 2.12” long) Motor cable: 58 cm (23”) long Motor: M-One Digital Drive Motor Case Asking $1450 USD. This kit retails for $2650 USD. Shipping from Toronto, Ontario.
- 1 reply
-
- m-one
- digital motor
- (and 6 more)
-
M-One Digital Follow Focus Motor Kit. The Motor and Cable are Brand New. The brackets and motor gears have been used about 15 times. Everything is in excellent working and cosmetic condition. I bought a Preston kit so I no longer need this motor. Asking $1700 USD. This kit retails for $2650 USD. See here for more info: http://www.innocinema.com/m-one-lens-digital-drive-motor.html Shipping from Toronto, Ontario.
-
M-One Digital Follow Focus Motor Kit. The Motor and Cable are Brand New. The brackets and motor gears have been used about 15 times. Everything is in excellent working and cosmetic condition. I bought a Preston kit so I no longer need this motor. Asking $1800 USD. This kit retails for $2650 USD. See here for more info: http://www.innocinema.com/m-one-lens-digital-drive-motor.html
-
For sale : Complete Scorpio FIZ remote system (3 digital motors) with additional Scorpio Servo Lens Digital (micro zoom kit) and Jerry Hill's PAM bracketry Including : Hand Unit FIZ Control (SN : DCF191) with 2,4 – 2,5 GHz 15 channels half duplex microwave link to MDB with 4 marking disks, neck strap, handle and one 6 meters emergency backup command and power cable from the hand unit to the MDB Motor Driver Box (SN : 191) with three power cables (including one XTR), two swiveling brackets for attachment on 15 &19 mm rods in the camera axis, reduction bushing, seven "on-off" driver cables (HD cameras, Red, all Panavision, Arri 535, 535B, 435, SR3, Arri III, BL4, SR2, Moviecam compact, Aaton 16 & 35) 3 Scorpio Digital Motors (SN : v42TX 370, 371 & 376) with three command cables, two additional ball bearings, nine additional gears (one 0,80 output .50" wide, one 48 pitch for Panavision zoom, one 64 pitch for Panavision iris, three M 0.5 Canon & Angenieux video, three M 0,8 Fujinon video) Scorpio Lens Digital (SN : CMZ0011) for wired operation directly by a Steadicam operator (two brackets provided) as an alternative to zoom on radio so that zoom can be controlled on virtually all cameras, with two power cables. Micro Zoom command with integrated additional knob for ajusting speed and two flexible 1,5m command cables for manual Steadicam use, with two side-clamps to fix on any gimbal handle. Jerry Hill's complete PAM bracketry including five various length Scorpio to PAM brackets (which can position the rosette on each on the desired side), five rosette to arm PAM D-clamps (three regular and two offset), six PAM arms (three 15 mm and three 5/8" Pana not on the picture). Three Service Vision direct 15 mm motor rods (alternative to using the PAM system), one 15 mm bracket support for all Sony digital cameras and one 15 mm bracket support for Arri Two high capacity NiMh batteries (each lasting one shooting day), two spare Duracell NiMh DR11 batteries and one Sony AC v55 charger One Flight-case (52 X 42 X 22 cm exterior) with foam compartments for accommodating the all kit, invoices and user's manual This system is in perfect working order, was very well taken care of and regularly maintenanced. The radio is one of the most reliable on the market and the motors always precisely hit their marks. Fully functional, only slight cosmetic wear and tear. You can test it at my place near Paris (France). It has cost me, with its eighteen cables, more than 24 500 euros. I'm selling it for only 8000 euros, but buyer pays shipping.
-
We are happy to invite you to our Chrosziel Open House in Atlanta! Come try, test and network with other ACs, DPs and Camera Operators. Interact with the lightweight Chrosziel Motor CDM-100 and the versatile Chrosziel MagNum 3Channel FIZ. Feel free to bring your own camera, lens or other Lens Control Systems to combine with our products! Highlights include: • Comfortable, intuitive designed in cooperation with Camera Assistants • Reliable safe Dual-band transmission with built-in spectrum analyzer 430MHz (5 Channels) and 2.4 GHz (11 Channels) • Lightweight, easy to mount receiver • Direct control of servo lenses (Cabrio and ENG lenses) • System is compatible with all motor brands • New Digital Motor - Extremely lightweight designed for Gimbals, Drones, Steadicam and today's smaller cameras. • Solid Rental Payback - Good investment See you there! Location: John Sharaf Photography, 1231 Booth St. NW Atlanta, GA Date: Thursday, January 21, 2016 - 10.00-14.00 Please find more information on https://www.facebook.com/events/517024081834350/or https://www.facebook.com/chrosziel/. Make sure to follow us on Facebook, Twitter or Instagramm as well.