Search the Community
Showing results for tags 'flowcine'.
Found 15 results
-
€5.500 ex. VAT Selling my beloved X-Spine Vest with both back and front mount, hard case, back relief pad, reserve padding and straps. Located in Belgium, Europe. Shipping at the buyer's expense.
-
Selling my 'Ready to Shoot' Tiffen M2 Volt, G70x Arm, Flowcine XSpine Vest package. Great for anyone looking to upgrade from a beginners sled and looking for a full package that's ready to go. Kit is 'Like New', never been on set and only rigged up a handful of times. Purchased at retail cost, sales tax already paid. My loss, your gain. Can ship in the US at buyers expense. See spreadsheet in the folder for all components, accessories and more photos: https://drive.google.com/drive/folders/1HKLnjR7foDu2EgYltWZ2tKJlJtHQPiA-?usp=sharing
-
Hello, I'm selling my steadicam vest. I bought it 2 years ago as my first vest. The vest is in very good condition and has a lifetime warranty from the seller / smartsystem.com . For more info on the vest, here is the link: https://www.smartsystem.com/product/vest-lite/ located in czech republic / europe. I am asking 1600€ + shipping
-
I'm selling my Sachtler Artemis Cine HD sled, flowcine xspine vest, g70x arm, and teredek pro600 . It's almost a complete steadicam package except batteries, everything you need to walk on set. Everything is well taken care of and in good condition. The package includes 1) Sachtler Artemis Cine HD Sled set - Sled (V-MOUNT), Transvideo Rainbow HD7 Monitor, Cables, SKB Hard case 2) Flowcine Xspine with Xbone (back mount) and front mount. This vest is almost brand new, only used it for a couple of times. Bought for the front mount & back mount options, but not the right vest for me. Comes with lots of extras: replacement latches, soft bag, different foam density options, vest t handle wrenches. 3) G70X Arm & Sachtler soft carry case 4) Teredek bolt pro 600 set - TR & TX Selling the whole package for USD$36000 excluding shipping, bank transfer charges & taxes. Interested please kindly PM me to discuss.
-
Hi, I am selling my 2 times used Flowcine Black Arm complete in Black case pro. including in case: Black Complete Tranquilizer 300mm Front extension block External rubber stoppers (2 pcs) Mitchell female mount original PRICE: 6.522,00 EUR Selling for 5.000,00 EUR, ( discount possilble ) preferred to EU but worldwide possible Contact and questions please use robert@cinq.cz
-
Selling my Flowcine Xbone Bundle. I have bought a 2nd vest and now no longer need this possibility of quick change to a vest. It is still ingenious. You can install with only a few screw turns on a Tiffen EXOVest this customizable backmount. It is absolutely freely adjustable and super rugged. I love it especially with heavy setups or on extremely long days to have that option of an backmount. There are also other mounting possibilities. For example: - build a Hardmount with 2 additional clamps - you can attach it to a Walther Klassen - use the screws inserts to build a bodymount asking 1000€ excl. shippment
-
Hi everyone I'm selling my beloved Flowcine xARM. It kind of turned into my back-up arm for a while now and I ended up not using it, that's why I decided to part ways with it, it's still a great arm though! Cosmetically as well as functionally the arm is in pristine condition (see pictures below). Package includes: -Flowcine xARM -original xARM Pelicase from Flowcine -five different sets of Springcores + one extra blue for front section (green, blue, orange, purple, grey (these are custom made and cover loads from 28-33kg) originally the xARM comes with only three different sets of Springcores), all in all eleven pieces of Springcores -the original xARM raincover from Flowcine (not to be confused with the heating cover, that comes with the arm, you purchase this one separately when you buy a new xARM) -all the original tools, maintenance fluid, paste, the heating cover and most spare parts are still in there, I'm throwing some extra maintenance fluid spray for the Springcores in there as I wouldn't need it anymore I'm asking 9500 € (Euros) for everything (+ VAT for Germany) Buyer pays for shipping and money transfer fees fully, preferably sale with invoice within the EU. Don't hesitate to shoot me a message if you have any questions. Fly safe! Cheers Ozzy
-
Hey Folks i am selling my one-time used Flowcine X Bone. Then I realized that I'm not the type for backmounted. No scratches, no quirks. It has only been in the office since then. Shipping within the EU. 1.200 € OBO new is 1.500€ (excluding VAT and shipping) The xBONE is a back mount adjustable arm, that is mounted on vests that allows this type of configuration. INCLUDED IN THE BOX 1 pcs Back bone 1 pcs Extension block Short 1 pcs Extension block Middle 1 pcs Extension block Long 1 pcs Adjustable Socket block stage 2 pcs M6 Roll adjustment knobs 1 pcs Exo Vest mount (Two parts) 1 pcs Adjustable Lever 3/8-16″ 60mm For Exo Vest mount 1 pcs Walter Klassen mount 1 pcs Adjustable Lever 3/8-16″ 50mm For Walter Klassen mount 1 pcs Action Products mount 1 pcs Adjustable Lever 3/8-16″ 35mm For Hard mount/Action Products 2 pcs M8x16 for Action Products mount 1 pcs Hard mount with 2 x 48-52mm Speedrail clamps 4 pcs M8x10 for Extension block lock 4 pcs M6x12 for Extension block angle lock For more Information go to... https://www.flowcine.com/product/xbone/
-
Selling my pro vest along with the flowcine xdrop (performs the same function as an iBaird, only you don’t have to switch over the socket block receiver from your pro vest). The vest has treated me well over the 5+ years that I’ve had it. There is some cosmetic wear and tear. I’m 6’0’ with a long torso, Chest is about 38” and waist is 34” based on the Pro sizing chart. The xdrop is in perfect like-new condition. I only used it once or twice if that. It works great, but I bought it thinking that I would switch back and forth between my pro vest and Klassen back-mounted harness and wanted the extra reach for my pro. Had an iBaird before but didn’t like the time it took to take it off without purchasing an additional socket block receiver. Asking $4600 OBO for the vest $475 OBO for the xdrop. $5000 OBO for both. Buyer pays shipping. Thanks, Joe
-
For sale Unit of BLACKARM from Flowcine. Set Ready for work with RONIN 2, MOVI PRO, MAXIMA or MOVI XL. Like NEW, Used only 2 times. Extras: -Tranquilizer - Fly Case PRO (Black version with wheels) - Extension for Ronin 2 4800€ This unit is in Spain. Cheers Steadikam@gmail.com
-
Hey everyone! I'm really sad to post this, but due to life circumstances, I have to part with this custom rig I've built. Flies rigs up to 40lbs easily. You can probably even push 45lbs. Comes with everything you see here. (except C-stand) Steadicam Exovest w/vest bag Flowcine Xbone kit Steadicam G50x arm with bag and raincovers Glidecam X45 sled with Camjam Monitor bracket and SmallHD 702 monitor PLEASE NOTE: The monitor has 1 stuck green pixel. You can sorta see it in the pics. It never bothered me, but you can send it in to SmallHD if it bothers you that much Also, the gimbal handle has a chip in the socket. Still fully functional, and that too, didn't bother me in operation, but if you can see in the sled layout pics, I am supplying 2 extra socket caps if you want to replace it. Again, I HATE that I have to part with this rig, but still has a TON of life to it as it is just over a year old. Purchased this system brand new for around $23,000. Save on me and get into a big rig system affordably! Thanks for looking! YOU CAN FIND ALL THE PICTURES HERE: https://scenedirector.imgur.com/all $14,500 obo -
Hi there, I purchased this 6 weeks ago (used) for a feature I just wrapped. We needed to get the camera handheld at hip height with a lot of scenes that involved leading or following the actor. It works very well with an EasyRig/Serene Combo. This Gravity comes with a hard case, screws, an Alexa Cheesplate and Arri Handle Adapter. It is in great working condition and just has some cosmetic scratches. I am in the process of purchasing a second Steadicam so I need to free up some cash. Please email me if you are interested mike @ mikeheathcote.com. All in new this would cost $5,000 USD. The Gravity One new on B&H sells for $3,600 USD plus the additional brackets are an additional $1,400 USD. Open to all offers, best offer takes it. Buyer pays for shipping. Thanks! Mike
-
Hi there, I'm looking to purchase a Flowcine Gravity One. Please email me if you have one for sale: mike @ mikeheathcote.com Thanks! Mike
-
Flowcine Black Arm now taking pre-orders
OpticalSupportLtd posted a topic in News, Events, Workshops
Flowcine are now taking pre-orders for their new Black Arm. http://www.flowcine.com/content/11-black See it in action on the Optical Support Mantis Rickshaw here: https://www.youtube.com/watch?v=wySDakyGgvc You can pre-order through OS by emailing info@opticalsupport.com, or through the flowcine website if you're outside of the UK. -
Kit Includes 1 x Easyrig 2 x Diving weights 1 x Safety strap 1 x Instruction manual Price: £750 Plus VAT £1900 With Flowcine Serene Plus VAT If you are interested then please contact us at info@opticalsupport.com or call us on 020 7281 0999
