Search the Community

For sale is my well looked after Gpi-Pro Cinelive Sled. Reluctantly selling as I cannot afford to keep this sled anymore! Read carefully below outlining upgrades, modifications and improvements made! Supply in Gold Mount or V-Mount - read on... Starting Price is £16,500 (+vat if UK based). Roughly $22,140 USD / €19,075 EUR. Additional options outlined below! One previous owner, bought new from Optical Support in 2018. Upgraded GPI gimbal to Volt system in 2020. Upgrade was done by optical support. Replaced main Pan Bearing in 2025. Performs wonderfully! Replaced threaded post connector and receiver in 2025. A great sled from GPI Pro. Check out what upgrades are possible, as the sled is still fully modular. In the future, one could add the superior new Lower Electronics, etc. Possibly 1.75" Post....? Info from top to bottom: Topstage & Upper J Box Betz Topstage & Plate Shimmed to correct clamp pressure on betz plate. Other 3rd party plates also fit well. Cinelive Upper J-Box Electronics Modified to add a 2pin accessory lemo (0B - pin 1 GND), wired into the main 12v line (rather than thinner inadequate wiring from the previous connector). Upgraded HD-SDI BNC 75ohm inputs to better Neutrik sockets. Less worn than previous stock parts. Volt Control Box Cam-Jam rigid control box mounting to betz topstage. (https://shop.cam-jam.de/product/volt-mounting-system-high/). Much better than stock tiffen rod mount (also included). Custom volt control box small power cable with angled lemo connector. (spare included) Custom volt control box front mounting plate for low-mode monitor or accessory. 3/8"-16 threaded insert with arri pin lock standard + 2x 1/4"-20 theaded holes. Easily removable if not required. Lightweight anodised green aluminium. Centerpost: Standard centerpost II 1.5" from Pro. Replaced threaded part, outpost receiver & locking ring (bayonet mount) 2025. Replaced nylon balls 2025 for inner post that run down the channels when extending post. Post Tool included. Gimbal: 1.5" Gpi Pro Gimbal with Tiffen Volt. Standard grip version. Originally upgraded 2020. Serviced in 2025 though optical support, new improved shimming/centering assembly at tilt bearings. Latest firmware. Added rubber grip racket tape around gimbal grip and gimbal handle for improved control and better feel. Can remove if needed! Nice in cold weather! Installed new Pan Encoder + cable 2026. (spare included) Installed new Pan Bearing 2025 purchased direct from Pro for improved performance. Makes a difference! (spare/old bearing included) Standard Volt gimbal control cable. (spare included) (Spare volt belts included) Previous Gpi-Pro Gimbals parts included (non-volt parts). Gimbal steadicam tool included. Monitor Bracket and Monitor 3 Options here: Option A (most OK-ish option) +£0.00 Gpi-Pro Telescoping Monitor Braket + Transvideo 6" Monitor 5/8" telescoping rods Cam-jam Yoke to Pro/XCS style legacy spud. Transvideo 6" monitor. Not as bright as most recent transvideo monitors. 2x Lemo Power cables and HD-SDI cables included. Good for a starter, or backup. May be able to use with latest Gen5 battery rack from pro with these rods... Option B (Better if you have another monitor) + £800 / $1070 / €925 Superior Cam-Jam Quattro II Monitor Bracket & Wide Yoke (no monitor). Great telescoping rigid monitor bracket and Yoke. Can include the mounting arms for SmallHD 703 (see picture) Other mounting parts for other monitors available at cam-jam.de Option C (best option) + £1800 / $2415 / €2080 Superior Cam-Jam Quattro II Monitor Bracket & Yoke + SmallHD 703 Monitor. Includes smallHD 703 monitor with matte screen protector. Used scratches & marks but functions fine. Includes custom flat weight plates for adding weight to the back of the monitor to help with dynamic balance. Stackable. Includes combination power and 2x HD-SDI cables. Use one to loop out of the monitor and back up the 2nd HD-SDI line in the post for an additional output in the topstage for a low mode monitor. Lower Cinelive J-Box Includes x2 Jumper Blocks. 12v all parallel block. Any plate combination can be used. 1, 2, or 3 batteries. 12v (14v) mode only. Shares the load between them. Standard 12/24v block. 14v from positions marked "C/M". Combine with battery in "A" position to create 24v. (Note: "A" position can change based on preference - see Battery Hanger section below). Upgraded HD-SDI BNC connectors 75ohm to Neutrik. Less worn than previous. Battery Hanger GenIV. Lighter weight than the previous GenIII, and makes a shorter sled ~25" fully collapsed (preferable operating feel to me). Modification: Quick change battery plates: Added thin custom aluminium plates with multiple hole patterns. Allows the following: Quick change from Gold Mount to V-mount by swapping plates. Can be done on set. Battery plates are on quick release connectors. Plates use M3 socket head cap screws. Great for travelling if you need to hire different battery types, eg different countries' or rental house's availability! Can change orientation of the battery plates. For AB V-Mount plates which have the same mounting hole pattern, the plate has to be attached backwards otherwise the battery can't be mounted due to the post/j-box in the way. Can move the plate under the post further back if more weight is required away from the monitor for dynamic balance. Good to have options! Can swap the rear 2 plates using the connector inside to determine whether the lower (default) or upper plate is designated "A" for 24v mode. Only weighs an extra 150g / 5oz in total for 3 plates which helps adding some mass to the lower stage of the sled. Upgraded Shottky diodes in Gold mount plates for slightly lower voltage loss. Can Supply AB Gold Mount or V-Mount Extra set of 3 other plates w/diodes installed (+£250 / ~$340 / ~€290) Case: Pelicase 1630 included with cut out foam Dock Tiffen Volt Dock Included Additional Cables 24v Rencher Cinelive -> Arri Alexa 35/265/Mini/MiniLF/Amira Coiled power cable included. Selection of HD-SDI BNC cables 14v Cinelive -> 4pin XLR power cable Spares: Spare Tiffen Volt Control Box Rod mount for Betz topstage Spare Post threaded connector Spare pan bearing (old bearing) Spare Volt control box power cable Spare Volt Gimbal Cable Spare Volt Pan Encoder+cable Spare 10A & 5A Klixon push pull fuses for Lower J Box. Spare volt gimbal shims and belville washers. Spare Volt belts. Please email me at jake(at)jakemcclean.com for more info, any questions or more pictures! Also available may have some Jerry Hill 1.5" docking rings if you already own or prefer to use a JH dock. spin1.mov

*** FOR SALE *** 1.8 Sachtler Artemis Cine Dove tail plate Docking bracket Gimbal in great condition Hard case 1730 Some accessories. View Photos Asking $8500 + shipping If interested, contact me here or email me at steadirig@gmail.com

Duel Tube Mantis Kit for ReadyRig: Kit includes everything you need to use the Mantis with the Ready Rig. 2 x Duel Tubes 2 x Maglock Hook Kit 2 x Gimbal Rig adaptors 2 x Medium bands (30-60lbs) Asking $1500 and you pay for shipping $2300 new, currently unavailable from BLKBIRD as its sold out. Please check out these links for details... https://youtu.be/kZusGs5Ihmg also.. https://blkbrd.film/product/mantis-for-ready-rig-bundle/ The Mantis was given an honorable mention in Society Of Camera Operators (SOC) Technical Achievement Awards

Repost!! XCS Ultimate Gimbal for 1.5” posts for sale!! (Apologies for the upside down photos, the Steadicam Forum likes it this way) Selling due to upgrade to OS Dragonfly that has a 1.75” posts. Bought in 2020 via Optical Support for my old GPI Pro sled. Located in London, UK. £4,250 +VAT ONO Buyer pays shipping IMG_7103.mov

Hello everyone, Does anyone familiar with the Ultra series have an idea about this issue i'm facing here ? WhatsApp Video 2025-03-09 at 21.19.12.mp4 For the story, I just bought an Ultra 1 Steadicam, and it was working perfectly until this morning, the sled randomly started to tilt around 45 degrees only when the camera was facing the stand, or facing me in front of the stand. When the rig is perpendicular to the stand, it behaves just fine, facing left or right, it doesn't matter. I didn't do anything special with it, it was working fine during my tests with the seller, I tested it with very low drop times, various cameras, and no problem. I brought it home and again, no issue during two days, i used it, had fun, and one day this happened... I'm having guesses but I wonder which one is the more likely to be true, so I'd like to be enlighten a little bit. - First the tilt head is doing a clicking sound when toutching it, even if it is correctly locked btw. There is a 1mm play when I grab it an move it side to side. I don't know if it's a normal play when unloaded, I'll check tomorrow if the sound and play are still there when loaded, but it doesn't seems very right to me. I have tried to tighten 4 screws under the head, but they seems to be a fine tuning of the head flatness, is that right ? so i'll have to undo that WhatsApp Video 2025-03-09 at 21.19.27.mp4 - Next, the handle, which seems to be in three parts is also clicking, but not like a bearing click, more like its not behaving well when loaded, and needs to be re tighten. Since my problem is only occuring when the rig is facing the handle, or the other way around, maybe it could be that? I can see the space at the junction between the yoke and the handle is larger on the upper side when loaded. and i see a play when i move it around, even unloaded. WhatsApp Video 2025-03-09 at 21.19.15.mp4 -And last, but not least, maybe the gimbal needs to be centered ? It seems strange to me, because it was absolutely fine the same morning, but I'm new to gimbals so... Also this part doesn't make any strange sound, there is a very very small amount of play when I try to move it around, same as when I bought it. WhatsApp Video 2025-03-09 at 21.19.23.mp4 I've seen videos on how to dismantle a modern gimebal but not an ultra 1. Don't hesitate to ask me for details, i really want to solve this issue, but I don't want to make it worse If a repair manual exists i'd really like to have a pdf I still hope this could be an easy fix, if not I'll bring it to a shop but I'd rather save some money this month ! Many thanks in advance Léo Rodriguez

selling steadicam M2 Volt gimbal including: - M2 Volt gimbal - Volt padded docking bracket - cam-jam monitor mount 10,000 USD OBO email: dani.dagher@hotmail.com text: +971557158191

Package includes: -Ready Rig with Pro Arms and Vega upgrade -Extra set of sealed polycord bands -Gimbal wrist straps -Extra set of gimbal straps -Lumbar bladder upgrade -Cinemilled swivel top bar -Cinemilled spindle mounts -Custom adjustable cage with bearing mounts for dual arm handheld -Custom machined aluminum top mount for dual arm hand held - 2 Ready Rig bags Package is $6750 USD new plus taxes and shipping and duties. Offering at $5000US Not selling mounts or any parts separately. -

FOR SALE -- GREAT CONDITION ARRI 1.5 GIMBAL $1200USD - BUYER PAYS SHIPPING QUESTIONS? Contact me at steadirig@gmail.com

Selling XCS gimbal. 1.5” sleeve. Excellent condition, just tested for level. Works on Pro rigs. Signed off on by Greg Bubb when I purchased, and I’ve babied it ever since. Buttery and performs beautifully. Just tested for level and came out perfect! Mainly used as a back-up and haven’t needed it for that purpose. Would love to see it used and not on my shelf. Used both handles on my PRO titan arm and they work great. Low mode holes already drilled on regular handle. Can ship, or NYC pick up. Goofy ergo or regular handles available. 4800 OBO

Get your hands on an almost brand new Ready Rig GS + Pro Arm and Vega upgrade. I thought this would replace my Easy Rig but I am too used to the Easy Rig I guess and found it didn't suit my operating style. Package includes: -Ready Rig with Pro Arms and Vega upgrade -Extra set of sealed polycord bands -Gimbal wrist straps -Extra set of gimbal straps -Lumbar bladder upgrade -Waist pad upgrade -Cinemilled swivel top bar -Cinemilled spindle mounts -Custom adjustable cage with bearing mounts for dual arm handheld -Custom machined aluminum top mount for dual arm hand held - 2 Ready Rig bags Package is $6750 USD new plus taxes and shipping and duties. Offering at $5500 US

Finally selling my beloved XCS gimbal. 1.5” sleeve. Works on Pro rigs. Signed off on by Greg Bubb when I purchased, and I’ve babied it ever since. Buttery and performs beautifully. Mainly used as a back-up and haven’t needed it for that purpose. Would love to see it used and not on my shelf. Used both handles on my PRO titan arm and they work great. Low mode holes already drilled on regular handle. No need on Ergo! Purchase options with *regular handle (for left or right operator) OR *goofy ergo handle (for goofy operator, holding handle with left hand, like me!) $3900 with either handle included! If you want both handles, we can make a deal. NYC pick up or buyer pays shipping Cheers!

Hello, selling genuine Master Series gimbal, 1,58" diameter, taken from an old master sled, as backup. General good conditions, with some scuffs. Asking 2.000 Euro, but offers are welcome. Shipping worldwide at buyer's expense. Only PayPal payments. best regards

GPI PRO Gimbal with VZ Grip and Extended Handle For Sale PRO Gimbal VZ Gimbal Grip Extended Gimbal Handle Short Gimbal Handle Gimbal Wrench Extra Main Bearing The gimbal is in perfect working condition. Some cosmetic wear and tear...see photos below. It comes with an extra unused main bearing, gimbal wrench, and short gimbal handle. The extended and short handles share the same bearing. The gimbal new (without the short handle and extra bearing) is $7900...asking $5000. Please email, text, or call if you are interested or have any questions. Thanks! Scott (213) 880-2550 scott.camera@mac.com

hello all, Im selling my Ronin 2 package after having it for almost 2 years. Just not using it enough and want to get it outta my storage for the next purchase haha. used it on a single TV show, a handful of sports broadcasts, and a music video. Parts And Accessories: Ronin 2 Chassis 6 x TB50s (3 were bought this past year) Ronin to Alexa Mini Power Cable Ronin to Red Power Cable Thumb Controller Motion Block Ronin universal Plate 4 by TB50 Charger Joystick Controller 2 short SDI Cables. Cinemilled Tilt extensions Cinemilled Mitchell castle nut Here are some pictures of the kit. I would prefer a local buyer but willing to ship. Let me know if you have any questions :) $6800 USD or $9000 CAD

Hello Everyone, I am selling my spare GPI Pro Gimbal, S/N 545 (this is the serial number for the gimbal itself that was printed on the original-style yoke which has since been sold separately; the new gimbal yoke S/N is 642x). For 1.5” center posts. Included in the sale is: Standard Pro Gimbal Grip with Clamp Short Pro Handle XCS Ergo Handle (Regular) Gimbal Wrench Spare Pan Bearing The Gimbal is in working order (last serviced by Jack Bridges on 8/18/2020 and the gimbal has barely been used since its last service). The yoke has been upgraded to the newer version, which is thicker and more robust. There’s normal wear and tear throughout. The gimbal cap has some marks from what appears to be concrete (not sure where these scratches came from as it occurred when the gimbal was out of my possession, however any issues that resulted from the damage have since been addressed). Asking $3,800 OBO plus shipping (gimbal is available for pick-up in Los Angeles) Contact info: aaron.gantt@gmail.com Aaron

Hey, I'm a novice looking for advice on a gimbal to do steady POV filming of nature hikes. I had bought a zhiyun crane m2 to hold a go pro hero9 but it constantly lags/ jitters, particularly when I'm using Pan Follow mode, which really kills the nice footage. Any recommendations on gimbals that will offer a reliably smooth shot would be greatly appreciated!

I’m selling my Cinema Devices ZeeGee. I’ve used it on one job and it performed perfectly. I just had some unforeseen bills come up so I need to sell some gear. It’s such a well made piece of gear. Asking 5,000 USD or Best Offer. I’m in Nashville TN so shipping should be easy and relatively cheap (buyer will pay shipping.) Comes with -Custom Case - Cinemilled Camera Plate

Selling my like new WK Slingshot 2.0 rig. Used on one job, otherwise stored in carry bag. Has a couple scuffs from travel but otherwise brand new. Comes with all bands, soft carry bag, medium gimbal crossbar and two extension arms. Paid $4500 plus duty fees. Willing to sell in the US for $4200 plus shipping. Save yourself import and international shipping fees. Also have an xSpine adapter if interested, $200. Email me if interested and for more photos: mattfrazerphoto@gmail.com

I sell my old Steadicam EFP GIMBAL It works very well I'm asking for 600.-€

Hey everyone, i've recently gotten a problem with my AK4500 The motors are shaking like crazy, it seems like it can't support the wait of the camera, i've been using the gimbal for a year with the same weight (BMPCC4K + Smallrig case) and have never seen this before. It stopped working after a long shoot (around 5 hours with the gimbal active) Do any of you guys happen to know what the problem is, and maybe how to fix it? Thank you in advance -Adam

I could be barking up the wrong tree here as it seems most posts here relate to high end gear, but I was wondering if there was any Weebill Lab users out there who could answer a couple of questions for me? I have just Picked up a second hand one, and having never used any gimbal before I was wondering if what I have found is normal... or if indeed I need to be contacting the seller! Firstly, the Pitch and Yaw axis can all be locked in place, but the roll only locks in one direction. I'm thinking this should not be the case. Secondly, There seems to be a lot of play in the gimbal arms, I would imagine they should fit snug. Footage I have capture seems to have a lot of movement and jumps...which is exactly why I got a gimbal to eliminate this! Any advice? Jim

Hello, today I’m selling the gimbal that originally came on my PRO I sled. It’s not the smoothest or comfiest gimbal to hold, but it’s still kickin! A cleaning and lubrication would be ideal, but can definitely be used just as it currently is. The grip was wrapped with what I believe was 3M tacky tape at sometime, which is pretty nice actually, but not sure what it looks like underneath. For 5/8 arm posts $500 (or best offer) + shipping takes them both. call/text: (805) 320-1845 located in LA/Ventura

Now when many friends out there change to the Volt, are there any PRO gimbals for sale? I’m looking for a newer and/or in good condition PRO gimbal with the clamp grip. Don’t need the VZ thing (.. or you have to convince me). Please send me a private message including photos of your gimbal. All the best, TOMAS

Hello I thought I would share with you a "one man band" rig designed for those like me, who like to use "enterprise" classic gear. I am not a steadicam operator. I did do a Steadicam EFP course in Los Angeles in around 1994 but after doing a few jobs, I quickly realised it was not my future. 30 years later, I still make films as my way to express myself and I want good gear to work with. My personal rig consists of: Red Epic MX Angenieux 24-70mm 2.8f Redrock Micro with Thumbwheel Heden M26VE zhiyun crane 3s zhiyun powerpack zhiyun easysling handle Smallrig zhiyun crane 3s arms and handles SoundDevices 302 mixer 2x Micron Explorer Radio receivers Manfrotto 123 rotule Aigle Concorde Arm & Vest. I had been using the Aigle concorde rig with the above kit (except the zhiyun crane 3s) for a bit with disappointing results. Aigle concorde is an excellent solution for the price with its elastic band arm (I really do recommend it for thos looking an affordable professional rig); I want to shoot at 50mm and with my talents, the rig was all over the place. So eventually, I thought maybe a gimbal would be better suited to my needs and abilities (which are very basic). The rig weighs on the arm about 12kgs, which is starting to be heavy for me .The gimbal is not rock solid stable at 50mm, but it is hundred times better than my classic efforts without it. A post prod image stabiliser locks it off perfectly. The secret is the Manfrotto 123 Rotule which allows me to take the gimbal on and off. Without the ability to angle the female socket, it is impossible to take the rig off the arm. (See attached pictures) PROS of rig Good weight distribution Bounce reduction & stable image for classic tracking shots Ability to do Don Juan with a gimbal Easy to un mount rig on a table CONS Rig height is high Heavy Gimbal consumes batteries very, very quickly Red Epic MX is at the higher end of the zhiyun crane 3s capacity so fragile. I wouldn't do any of those crazy camera moves you see on youtube with it. Cannot see how to easily do low or mid mode. Note: dangeling cables do affect the gimbal a lot. They made my gimbal nod as I walked. These gimbals don't offer cable / power management features for big cameras. This rig does not replace someone who is trained and knows what they are doing, but could inspire those looking for a personal, relatively low cost solution.

Who has ever tried the Smartsystem gimbal? Andrea, the owner, is very competent and precise. I had problems with my old gimbal and I decided to replace it with Smartsystem because I had already tried their equipment. The result was wonderful. The gimbal was adapted to my 1.5" post. It's perfectly soft, smooth and centered, especially no there are mechanical games and it’s all nice solid! Its hinge opening allows a quick adjustment and the handle allows a firm grip without slipping. Smartsystem is recognized by products made in Italy and for the accuracy of their material. I think this is just the first purchase at home Smartsystem. What do you think about it?