Search the Community

XCS TB-6 SN: 0173 Manufacture Date: 05/10/2002 I purchased this used about four years ago, and used it for little over a year with no issues. The monitor works just fine. I haven’t personally had it serviced but it has sat in a pelican case for the majority of the time I have owned it. In addition to the TB-6 I am also selling: - Pelican Case 1450 - Redbyte Decimator - Blackmagic Design SDI to Analog 4K MiniConverter - Mounting Pin with Pin Receiver - Plastic Rain/Dust Cover for TB-6 - Sun Shade for TB-6 $2,000 OBO (I also have Down Converters for sale in a nearby listing;

No idea if this is worth anything to anyone, but feel free to make an offer if this interests you. This is the very old school green screen. Still the brightest image ever on a Steadicam. The lower right corner of the screen is suffering from delamination. You can see where in the photo: it's the area that looks like an oil slick. Included is the raincover. The last time I used it was in the rain because the monitor is well sealed for weather and my HD LCDs at the time were full of holes to let the rain in, and would overheat when wrapped up. Could be useful for spare parts (the high voltage assembly is relatively low mileage as it was replaced not long before I retired the monitor.) Or might look nice in a Steadicam museum, or as a doorstop.

1 – GPI PRO 5” High Intensity GEN III Monitor including Frameline Generator – S/N 010 - Including Rain Cover. Only slightly used and in great condition. Asking 950.00 or best offer. Buyer pays shipping costs. Pics below. If interested, please Email me directly: david.kanehann@gmail.com

I'm doing a clean up of some older Video Equipment, Perfect for film work. Please send me a PM if any of it Interests you. All Equipment is located in Sydney Australia. Pickup is no problem Postage worldwide at buyers Expense. DX 400 Receiver. 2x Shark Fin Antennas. Various short BNC Cables. 4x Long BNC Cables. Bag of BNC + Antenna Joiners/ Connectors 1x Instruction leaflet 1x 4pin XLR - 4pin XLR pwr Cable 1x Mains to XLR Pwr Cable (US Plug) 1x Pelican Case 1x Sony Video Tap 1x Video Relay Lens 1x Hirose Pwr Cable Suitable to Attatch to Either 16mm or 35mm Viewfinders In order to get a video feed 1X Canatrans NTSC Video TRX 5x Antenna 1x Instruction Manual 1x 3pin XLR pwr Cable 3x 4pin Sled Pwr Cables 1x 2pin Lemo Pwr Cable 1x AB D Tap Pwr Cable Preston 1 FI&Z 12v/24v Booster 1x 4 pin Sled Pwr 1x 4Pin fischer - 3 pin fischer Pro Gen II Green Screen Monitor (no scratches) 1x Shipping Case 1x Pro Monitor Cable Modulus 3000 Transmitter 3x 2pin Lemo Pwr Cables 5x 3pin Fischer Pwr 2x 12v 4pin XLR Pwr 1x 10pin Lemo 12v Pwr 2x 4pin Sled Pwr 1x Small Pelican 4x Aerials Best offer gets it.

used Decimator 2 for sale great working condition includes AC power cable and PRO to Decimator power cable $350.00 US dickcrow@gmail.com

For sale: XCS TB6 monitor (green screen) with frameline, stabilizing plate & Pro mount. Great working conditions. It is the workhorse that it is known to be. I've never had any issues with it. Has a small scratch on top left corner of housing, screen is not affected. Comes with or can be sold separately: XCS Digital Level Plus, a year old, very reliable. Redbyte Decimator downconverter (2 Ptap & 1 2 Pin Lemo power cables). This makes a an excellent go-to or back-up package. Asking price: $3500 OBO + shipping Email me for specific unit price or info. rtournois@gmail.com Thank you

Selling my Tiffen Ultra Steadicam with lots of bits and pieces. This rig has served me very well since 2001 and according to Dan Ikeda at Tiffen, it is probably the most updated of the generation 1 Ultras. The battery system has been upgraded to the idx v-mount style and everything works well. Full disclosure, this rig was dropped while in low mode last summer and some damage was sustained. The camera and lens took the majority of the impact but the nose of the top stage was bent slightly downwards. the base of the rig hit the ends of the carbon rods and they seem fine. As it was part of an insurance claim, I had the rig sent to Tiffen for a full disassembly and inspection. They looked over everything, saw only what I saw (the bent nose) and sent it back to me. I powered it up, everything works fine except for the side to side motors in the top stage. They are stuck but I think I can fix it. I have the original Green screen monitor for it as well but haven't used it in years since getting my Transvideo monitor. The CRT was banged up a few years ago, the screen has a crack in it and the magnets on the tube need realigning a circle on the monitor appears slightly ovoid. I have always taken very good care of this rig and I think its cosmetic and mechanical state speak to that, but it was used. A lot. I am happy to discuss at length any questions about the rig, I know there might be trepidation about this but having spent a long time with it since getting it back fro Tiffen, I think it could serve someone very well. If you are in the market for a very affordable rig that can support and power the biggest cinema cameras and lenses, this could be it. For piece of mind, I could ship the rig to Tiffen for another inspection if the buyer was interested. Elsewhere on this forum I am selling an excellent, very clean Tiffen Ultra Arm with 4 posts and a new socket. Could be a match made in heaven (or Burbank) Included with the sled are: lots of spare parts, CRT monitor with 2 cables yoke for Transvideo 6" monitor yoke for any monitor with a 1/4-20 screw mount. 3 camera plates, 2 long, 1 short Antler dovetail mount ( I used this for mounting a Codex Raw Recorder to the bottom of the sled) IDx and Tiffen 24volt battery mounts. 6 Tiffen 24volt batteries (recelled by Emory Soos at Lentequip) with 2 PAG chargers in a hard case. All offers considered. Happy to ship internationally at buyers cost. Gerard Sava gfsava@gmail.com

Hi all, Reluctantly I am letting go of my wonderful Cinema Products Master Steadicam Greenscreen 6" Monitor. Apart from being one of the brightest, highest contrast, sharpest and most easily sunlight viewable monitors ever made, the unit being a CRT phosphor screen is relatively heavy on its own, which has proved extremely useful when you need to add extra weight to the bottom of the rig. It works fine, as seen in the pictures, and comes with a universal mounting plate, illuminated level, and XLR / BNC to Lemo power / video cable. It has controls for vertical height, brightness and contrast, and is so bright I have had to use a hood with it indoors just to avoid it illuminating the talent's face! The monitor is located Wiltshire UK. Very sad to see it go, but needs must. Make me a (sensible) offer! This is NOT an accurate representation of the quality of the picture, which is excellent, but to give you an idea of how bright the monitor is in compared to normal indoor lighting.