Search the Community
Showing results for tags 'monitor'.
-
FOR SALE: Brand new SmallHD 1303 HDR Production Monitor and accessories. Purchased in November from the DVShop in Toronto. Tested once and put back into original packaging. Panel has less than 2 hours on it. I was going to use this monitor as a focus monitor, but decided to stick to the 703 instead due to being in such tight sets. The monitor comes with a Gold Mount Power Kit/Cheese Plate, as well as a Sun Shade and one Rapid Rail Mount for mounting a wireless receiver. The gold mount plate features small risers that raises the plate up by approximately 1/2", to allow a standard Vesa mount to attach underneath it. SmallHD designed the cheeseplate/gold mount adapter to conflict with standard Vesa mounts, forcing you to use the SmallHD C-Stand/Table mount, which I do not like because it does not tilt. This modification from VFGadgets allows you to use any tilting Vesa mount of your choice. Brand new, this monitor goes for $3,499 USD. Accessories valued at $450 USD. I am asking $3,000 USD for the package. Buyer pays shipping. Pictures can be sent upon request, but would prefer not to take the monitor out of the packaging. -
complete steadicam package for sale. 1)sled :Custom made carbon fibre 4 stage Telescoping superpost sled.Its a very Good Sled in terms of Stability and extremely low mode and high mode shots.Rock Solid.center post Dia:2inches.collapsed lenght:29 inches,extended length :80+ inches. No sdi output.No coiled SDI cable inside(could not find it in the market when it was being constructed) but you can install it if you want and find it.presently i hard wire the sdi cable from camera to monitor.which works fine and gives best picture without any Noise Interference which you get sometimes when it is center wired. Rest all power supply(12/24V Inbuilt switchable Circuit)in good working Order. 2)Arm :Steadirig silver spring arm.For any Load Cameras.Almost brand new.In Prestine condition.Had bought it recently.just 2 months old.only few shoots done on it.comes with a soft case. 2)Monitor:7" Day Bright Boland Bvb07a 1400nitts.Had bought it recently.Almost Brand new.just around 2 months old.with mounting bracket.with sun Hood.And power cables and adaptor.With Compay Packing as it came.plus a carrying case. 3)Vest : Walter Klassen Back Mount with all accessories in the pics(extra pads, extra bladder and ratchets).Used but in Superb Condition.see the pics. Operator waist size :32-34 inches, Height :5:10 inches. with a vest case. 4)Cables : 1 x sled to Alexa power cable, 1 x sled to red power cable, 1 x sled to bartech power cable, 1 x sled to cmotion power cable, 1 x sled to Teradek Bolt power cable, 2 x hdmi to mini hdmi cable, 1 x sdi to sdi cable, 2 x hdsdi to hdsdi cable. 5)Batteries : 2 vlock batteries. 6)1 Dual battery Charger. 7)Additional Gear Arm : Movcam Knight d202a Ideal for Red Cameras. vest: Movcam front mount vest. for all cameras. Monitor:7"Konvision monitor with sun hood. 8)Hard Cases: Steadicam Case; Vest Case: 9)Accessories: free with above purchase. camera mounting plate. practice weight cage.heavy if you can afford shipping. weight block :1kg Accessory mounting bottom plate. Stand. please let me know if wish to see more pics. Located in INDIA price: USD29000/- for everything listed above. Buyer pays shipping. For Questions and Enquiries contact : sameer_kharatmal@yahoo.co.in Enquiries,Questions and comments on email only please. Thanks.
-
Hi again, I'm also selling off my Transvideo Starlite HD5 monitor. It's in very good shape. I had used it with a gimbal only a few times. Specs: 3G / HD-SDI input + reclocked output 5" OLED touch screen with wide color gamut (EBU) Extremely lightweight: 190g / 0.4lbs 6-30v DC power input through Lemo2 "mini" Low power consumption (approx. 6W) Built-in tools: high-resolution waveform monitor, a precise vectorscope histogram of the luminance embedded SD card recorder delivers dailies in H.264 Package includes: 1 x StarliteHD 1 x Power cable mini-Lemo2 to D-Tap 1 x Noga Arm for Monitor 1x Sunhood 1 x HD BNC Cable 1 x 8Gb class10 SD card 1 x microfiber pouch 1 x hard case with custom foam See Transvideo website for more info. Euros 900,- (plus additional 19% VAT in Europe) Free Shipping within Germany if interested email me... mail@dploher.com
-
Hi Guys, since I produce a monitor yoke for the ATOMOS Shogun Inferno / Flame I thought I can also make different ones for you if you need one for a monitor with threads on the sides. If you tell me the dimensions, I'll be able to make them for you with threads where you want them also fitting ones for my monitor bridge with clamp. I already have one for the SmallHD702 but could easily do some for your monitors. What I need: - width of the monitor / meaning the distance of the 1/4"-20 threads on it's sides - distances from top AND bottom of the monitor to the middle of the 1/4"-20 threads on the sides - space you want between monitor and yoke at the bottom. I would go with at least 15mm. If you want to attach a V-mount battery on the back or a spirit level on top/bottom of the unit you may need more.
-
This is list what I'm selling. 1. REDMAG 128GB X 2 (each $280) 2. REDMAG 256GB X 4 (each $740) 3. RED STATION MAG X 2 (each $60) 4. RED STATION MINI-MAG X 2 (each $80) 5. RED ROCKET-X AND ECHO EXPRESS III-R Thunderbolt 2 to pcle 2u(Included a rack case for moving) X 1 ($2,700) 6. RED 4.7" Touch monitor X 1 (each $1,100) 7. Arri LS-10 Lens support X 1(each $300) I'm in Korea. so I prefer PayPal. If has any question about my items just tell me (popowowo2@naver.com) (Buyer will be have to pay for shipping and handling.) Thanks a lot
-
For Sale: Brand new XCS Drop-Down Style Monitor Mount. Purchased new in April, 2017 from Greg, never used. Has small mounting plate for Transvideo CineMonitorHD8 (not pictured) Clamp fits around 2" Posts Lowers the Center of Gravity of the monitor approximately 3.5" to better align it with your batteries, to improve dynamic balance. Has approximately 4.25" of travel in/out. Cosmetically and functionally in brand new (unused) condition. Purchase price new from XCS: $1,350 USD Asking $1,100 USD. Located in Toronto. Buyer pays shipping. FedEx Ground available at discounted rate to Canada or US.
-
Hey there, I have an excellent condition Cinetronic 2 monitor with yoke and Anton Bauer plate. This was my back up unit and was barely used. Best offer takes it. Please email me at mike @ mike heathcote.com I will be selling my main Cinetronic 2 after this goes. Buyer pays for shipping. I am from Toronto, Canada. Thanks! Mike
-
$1500 in NYC. Boland 7" Day Bright Monitor BVB07 1500nts with very, very little use. No scratches or burn-ins, always protected. Ready to go! http://www.bolandcom.com/product/bvb07/ Selling my steadicam so this is up for grabs! Send me an email if you'd like to discuss at info@zachzamboni.com thank you.
-
EDIT: I'm also including a tally as well. Some wear and tear but nothing that affects its functionality. Standard 4-pin lemo connection, two tally lights, junction box and diode. FOR SALE: Selling the left-over parts of my MK-V Evolution sled. Sled includes center post, center post cable, bottom stage, battery rack. Gimbal, Top Stage and Monitor Bracket NOT included. The sled was originally built for PAG batteries but has since been modified with Gold Mount battery plates. The TB-6 is in excellent condition with minor wear-and-tear. I’m also including a rain cover for the TB-6 as well as a sun hood for it (the strap for the sun hood is NG, so it would need a little love). Included in the package is a Marrel digital horizon. Unfortunately the digital level doesn’t feed video so an additional BNC cable from the sled to the monitor in order to pass the video to the monitor. I’m also throwing in a Decimator I, a Blackmagic SDI to Analog Mini Converter, 8-pin monitor cable and an MK-V-to-XLR cable as well. Asking $3,500 for the whole package but am open to other offers. Also, I’m willing to break the package up. All reasonable offers accepted! Located in North Hollywood, CA Feel free to message me on here or email me at: aaron.gantt@gmail.com with all questions and offers. Cheers! Aaron
-
New 8" X-SBL monitor (version 2): $4600 shipping from California Active Matrix LCD with LED backlight. Reso: 1024x768 Backlight rating: 2000 Nits (1500 nits prior). Viewing angles: +/-85 Deg (Prior: ±80° H, +60/-80° V) Power consumption: increased to 32W. Weight: 3.6 lbs (1.6 kg) Same mechanical design, so brackets & cables remain the same. Special intro for orders placed from Transvideo International before Dec 31 2017. Use promo code: FORUM 8 Email direct your order request to: marianne@transvideointl.com Marianne Exbrayat marianne@transvideointl.com
-
For Sale - USED TV LOGIC 5.6 HD Monitor VFM-056WP I have a Few to choose from All have been professionally maintained and calibrated by TV LOGIC in Burbank They all are calibrated and cleaned before sale These are the WP models which have the "advanced" feature of HDMI to SDI conversion - use to be $300 extra just for that upgrade All include the original shield and AC power supply / right angle BNC / top and Bottom mounting hardware - everything included like original brand new unit - minus the box Come test it, bring a camera if you'd like Monitor only - $525.00 Monitor and P-Tap cable - $565.00 contact direct for fast easy communication: TIM@CINOFLEX.COM or SALES@CINOFLEX.COM TV LOGIC - VFM-056WP : 5.6” Light Weight Compact Viewfinder The VFM-056WP is available in two configurations and is ideal for HD-SLR production. A 6"x 4"x 1" lightweight magnesium-alloy case houses a 5.6” 1280x800 LED backlit LCD display with a full complement of preferred features, including DSLR Scale, Focus Assist, Various Scan Models, Markers, Audio Level Metering with speaker, Time code Display, HDMI loop out via HD-SDI(720p), WaveformVector Scope, Y Level Check and Range Error Check. Display Spec. Size 5.6" Resolution 1280 X 800 (16 : 10) Pixe Pitch 0.094mm Color Depth 16.7M Viewing Angle 170°(H) / 170°(V) Luminance 300cd/m2 Contrast Ratio 500:1 Display Area 121(H) × 76(V) mm Input 1 X RCA Analog Input (Composite) 3 X RCA Analog Input (Component) 1 X BNC 3G-SDI A Channel Input 1 X HDMI HDMI Input Output 1 X BNC 3G-SDI Output Audio Audio Out Analog Stereo (Phone Jack), Internal Speaker(Mono) FPGA Functions , 3G-SDI Level A/B, Audio Level Meter Display, Blue Only, Focus Assist, H/V Delay, Luma(Y') Zone Check, Marker, Max Brightness On/Off, Mono, Range Error, Temperature Adaptive Color, Time Code Display, User Aspect, Various Scan Modes, Waveform/Vector, Zoom Closed Caption Calibration Other Functions USB Firmware update by USB cable Ethernet Conversion HDMI-to-SDI, SDI-to-SDI,
-
703 monitor is new; never used. Monitor ONLY. It was purchased new from B&H last month as a replacement for a DP7 that was damaged during a shoot. Looking to sell for $2470 plus shipping. http://store.smallhd.com/products/ub-series/703-Ultra-Bright-Professional-On-Camera-Field-Monitor SmallHD DP-7 Monitor for parts and its power accessories. Cables in perfect condition with no kinks. Buyer pays shipping. Make an offer to package all items or see prices below: (1) DP-7 Sony Series “L” Power Kit (“L” battery bracket and DP7 Pro battery adapter plate) http://store.smallhd.com/store/dp7-oled-accessories/DP-7-Sony-L-Power-Kit ($156 new; sell for $75) (1) Power supply with power cord (Selling for $20) http://store.smallhd.com/store/dp7-oled-accessories/DP7-Power-Supply-Grounded (1) RED power cable (Hirose to 4-pin LEMO, 3’) ($80 new; selling for $40) http://store.smallhd.com/store/dp7-oled-accessories/Hirose-to-LEMO-3ft (2) Arri power cables (2pin to 4-pin LEMO). Custom made with better shielding than manufacturer’s. Perfect length at 2'6" (Selling both for $50) (2) D-Tap power cables (Anton Bauer Hirose to D-Tap). Custom made with better shielding than manufacturer’s. Length 2'6" ($50 new; sell both for $60) (1) 4-pin XLR cable, 6’ length. (To power off a block battery) (Selling for $30) DP-7 Monitor. The monitor screen itself does not work. It powers up and fan turns on but screen has no image. Sold as is for parts. Best offer. DP-7 Monitor Sunshade. There is a small piece of plastic that broke off seen in the 2nd photo (top left hook). Still works though. (Selling for $30) https://www.bhphotovideo.com/c/product/1078752-REG/smallhd_acc_hood_dp7_ac7_oled_sunhood_for_dp7_and.html
-
Asking $7700. Bought new in 2016, professionally maintained, great shape. This zephyr has many extras so have a close look. Very little use and totally ready to go! **Note there are two extra items are sold separately below, a Boland monitor and custom case. $7700 Zephyr Package Includes Standard Zephyr Sled Zephyr Vest Zephyr Arm Steadicam Original 7" Monitor (Like New) Standard Dock Steadicam Original Rolling Case --Extras Included in this package, totaling $1400.-- Extra Balancing Weights ($150) Skymagic Custom Monitor Yoke ($150) Skymagic Pro Grip ($150) 2nd Battery Plate (a must-have item $650) American 20" C-stand w/ removable base ($150) Misc cables ($150) Spare parts **Extra Options Sold Separately $1500 - Boland 7" Day Bright Monitor BVB07 1500nts (Excellent Monitor!) w/ Custom Skymagic Yoke and power cables. $350 - Customized Pelican Flight Case - Entire kit breaks down, with stand, into this one case and weighs under 70lbs. This means no oversize luggage, only pay overweight to 70lbs when flying. This is critical if you are traveling and shooting often. *Note you will have to carry pads for vest and belt in your personal luggage. The original steadicam case is oversized luggage and doesn't roll well. **Pick up for free in NYC otherwise buyer pays for shipping and insurance. Questions? - Email me at info@zachzamboni.com and we can setup a call. Thank you!
-
Selling my Cam Jam monitor yoke and sled bracket. I have a collar that fits to the master series post. I also have spacers for the SmallHD DP7. Yoke will fit the 8" Transvideo Fits with Transvideo HD6 and HD8, Stargate FHD 7 , RainbowHD SBL 7, Cinetronic GEN1 / GEN2, SmallHD 703, SmallHD DP7-HB 703 and 702, Boland BVB07, Marshall V-LCD70XP / XHB and STX651, Nebtek Solar HD7SC and TV Logic. Asking $1k. Photo: https://drive.google.com/drive/folders/0B9ipbzgN2fQSeHNlVUlBZE0xZUk?usp=sharing
-
Introducing the BRAND NEW TV LOGIC 055-A OLED Monitor Literally the sharpest monitor under 7" ever manufactured - all new OLED Panel and brand new alloy housing with new features. PERFECT FOR ANAMORPHIC - has the sharpest horizontal pixel-to-pixel panel range!! We have them in stock now 1799.00 price is slashed to 1649.00 with FREE Ptap-PWR Cable or FREE Sony-L type Battery/Charger KIT (while supplies last) They are in stock NOW!!! Get them before they're gone. email for order and custom quote: SALES@CINOFLEX.COM LINK TO MORE INFO: http://www.tvlogic.tv/Monitors/M_Spec.asp?sidx=92 Features: 5.5” Full HD Resolution (1920×1080 ) OLED (Organic LED) Luminance up to 350cd/m Contrast Ratio of 17,000:1 Accurate Colour Reproduction Camera LUTs support HDMI <-> SDI cross conversion Built-in battery bracket (Sony L-series) Various optional Accessories Firmware update by USB Stick TVLogic Colour Calibration Utility Audio Level Meter Display Luma(Y') Zone Check Key Lock H/V Delay Time Code Display Various Scan Modes Waveform / Vectorscope
-
Hey All, I am selling my XCS (Xtended Camera Support) TB-6 Green Screen Monitor. I’ve had this guy for almost two years now and it has served me very well. My only reason for selling it is that I am upgrading. The monitor works perfectly and only has normal cosmetic wear. There are a few small scratches and one dent in the glass that I have pictured below. These scratches do not affect the functionality; I never notice them when operating. I am also including an 8-pin power cable and a Deminator I (upgraded with a 2-pin power connection in the down-converter by Terry West). The TB-6 comes with a Pro monitor bracket spud attached. Spirit level included for no additional fee. Asking Price: $2,600 OBO Located in North Hollywood, CA. Feel free to email me with any questions: aaron.gantt@gmail.com Cheers, Aaron
-
Selling my trusty 7Q+, it just came back from convergent design squeaky clean, and like new. Comer with: - Movecam Monitor Bracket - (2) 256GB hard hard drives with cases - one P-tap power cable (No-picture), and an XLR power cable (No Picture). Selling for $1525.00 - Firm. Buyer pays shipping. Located in Atlanta GA. Thank you.
-
Hi there, I'm looking for a 13" Small HD (1303HDR) monitor. Please email me: mike @ mike heathcote.com Thanks! Mike
-
MKV Humming Bird SD Monitor. Very good condition. Robust waterproof construction. Good weight for sled. Daylight viewable. All control knob waterproofing gaskets new. Tilt bracket and spigot attached. 2 4' MKV combo power video cables included. Could be a great back up monitor when used with downconverter for HD cameras. Could also be used in rain/wet conditions when covering a monitor is not possible or wanted for visibility. Decimator 2 video downconverter. Will convert from 3G/HD/SD SDI to HDMI or Composite video for standard definition monitors. Also great if you have an HDMI only monitor or transmitter and are using a HDSDI Camera. 3 pin Lemo (MKV accessory power) cable included. The Decimator can be used in conjunction with the Hummingbird monitor for a robust/waterproof backup monitor system or an inexpensive primary Steadicam monitor. Will sell both for $500 or individually for a reasonable offer.
-
TIFFEN HD Ultrabrite2™ 8.4” MONITOR 1400 nts. In Excellent Condition. Great Daytime Visibility. Free from scratches and blemishes. This Monitor was Lightly used. Priced at: $3800 USD. Tiffen HD UltraBrite2™ 8.4” TFT Color Monitor is HD/SD SDI (SMPTE 259,274/292/296), DVI, Y/C, PC VGA and Composite video monitor exclusively designed for Steadicam® and field production use. Compatible with any stabilizer system. Features 1400 nts (cd/m2) of brightness and the use of a proprietary bonded AR glass coating, the HD HD UltraBrite2™ can be viewed under the most extreme lighting conditions. • Selectable Color Temperature (9300K / 8000K / 6500K / 5000K). • Brightness/Contrast/Color/Tint/Sharpness/Gamma Adjustable. • Portrait/Landscape Image Rotation. • Vertical and Horizontal Image Flip Capabilities. • Adjustable Image Scaling, 4:3, 16:9, 2.35:1 Anamorphic, Under scan and more. • Control settings stored in non-volatile memory. • Automatic video format switching. • Isolated video inputs. • Picture-in-picture (PIP). • Non volatile memory storage of monitor settings. • Dimmable dual Tally light indicators for studio applications. • Selectable OSD Menu Language Support. • AR Glass for Direct Sunlight Viewability. • Standard _-20 and 3/8-16 tripod screw mounting holes, and optional yoke with rod mounts. • Mounting screws located on back cover for mounting of external V-loc battery adapter. • Front panel LED power indicator. • Programmable Direct Access Menu Buttons. • Fully software upgradeable for special applications or future options. • Built-in frameline generator • Instant on feature that powers up monitor without pressing additional buttons. • Integrated 10-LED horizon display. • Wide support of SDI, HDSDI, RGB, YPbPr, YCbCr, SVHS, Composite NTSC/PAL/SECAM, DVI-D, and RGB video formats. • Unique dual chamber aluminum case design to help dissipate internal heat and keep electronics cool without the use of a fan. • Ergonomic cable connection layout to help prevent cable snags Monitor has two input sources for power: 4 pin XLR or 8 pin Lemo. Located in San Diego, CA Please text or call Jeff... 760-505-7011 Thank you for taking a look.
-
Hello all, I am looking to sell my Small HD DP7 LCD Monitor to It comes with P-tap to 4 Pin Hirose cable used to power it. I'm local to NYC. Buyer pays shipping. (Bubble Level shown in picture not included in sale.) Asking: $900
-
The package is worth over 30k new. It's only at $2000 in the bidding with buy it now at 10k and less than 24 hours to go. its about to end on ebay: http://r.ebay.com/R7oziP Thanks Tyler
-
Wanted: PRO 3" monitor arm extension please reply at dickcrow@gmail.com
-
Hi all, I'm looking for a monitor yoke suitable for a marshall vlcd70md Measures: 7.37 x 5.57 x 1.1" (18.7 x 14.1 x 2.8 cm) Mount screws are 1/4". Thank you very much, David
-
Selling off a few items: XCS TB-6: $3000. As many of you know I love this monitor. It just works. And you can see it under any conditions and from nearly any angle. Duo-frameline generator model. This monitor was gone over by Greg Bubb and the XCS engineers and given a 100% clean bill of health back in November of 2015. I used it for a few weeks after that and then it has been in a Pelican and unused. I did go down in the rig with this monitor (it was examined by Greg after the fall) and it has the tiniest scrape on the bottom of the rear housing. Other than that cosmetic imperfection, the monitor is A-1. XCS PDL: $1500. Analog. You know what it is and you know it's a workhorse. 8 pin in and out. Decimator Downconverter (1st Gen). 2 of them with power cables from the PRO sled. $250 each. Work seamlessly. Never had a problem with either. No power cycling these puppies! Buy the TB-6 and PDL together and I'll sell as a package for $4000.00 Gen 3 Battery Rack (does NOT come with electronics): $4500 (will include all 3 jumper blocks for this price -- they are $160.xx each from PRO) Used this for a few years. Been sitting in a Pelican for about a year. Terry West drilled one tiny hole in it (obviously in an area where it would have no impact on structural integrity). Has Anton Bauer plates. With all three jumper blocks, and factoring in tax, this package is a $1520 savings over buying new. http://www.xcsinc.com/ultimate/ult_compnts_TB6.html http://s781.photobucket.com/user/B-263-54/media/Steadi/IMG_2293.jpg.html (PDL) All gear located on the Westside of Los Angeles. No Paypal. Not happening. We can meet and go to the bank. If I know you, like really well, I might consider cash ;) I have First Entertainment and also have Wells Schmargo. Many of you know I'm a stickler for keeping my gear in top-top shape. These items fall under that description. Cheers! Last pic has the small hole with the bottom half highlighted in white
.thumb.JPG.8daf74b1d62a7af767d3afc25c827d3e.JPG)
