Thank you for help.

Robert

IMG_4153.HEIC IMG_4154.HEIC

Is it absolutely necessary for the Volt system to have the original Volt docking bracket, or can I also use the old 1,75" docking bracket for the post?

What are the advantages and disadvantages ? ...asking for a friend 😉 . Thanks !

so i have this problem with my M2 Volt Steadicam. I set up the system, balance it perfectly and turn on the volt just like always but then it goes literally crazy. Tilting and rolling

like mad and it goes stronger each loop, i literally can’t control it. Tried everything, trimming, resetting and all but it ain’t do anything. We have a set going on so im in a serious urgent guys…

Unfortunately the new nose box does not come with the screw threads on the front and rear, so if you are using 3rd party monitor mounts like camjam they will not fit, odd decision to leave them of the new model. 

Here is a pic -

Thanks in advance!

When I attended the SOC conference near Philly last year, there was a gentleman present named Nabir Barr(NB stabilizers) who's company fabricates steadicam systems and accessories and sells them.

One of those products is the "Rockabye" which is an auto-horizon apparatus that attaches to the topstage and keeps the horizon line constant without affecting the tilt of the camera.  

Has anyone used this system before, and if so, what were your thoughts in comparison to other more known single operator systems like the volt or wave?

Does anyone have any news on whether a 2" post compatible Volt is anywhere in our future.  The last time I spoke with MK-V, they were working on it, but that was late 2019.  I'm not crazy about giving up my 2" XCS post to gain a Volt, but not crazy about the height of the Wave either.

Thanks, Mark

I’m on set and couldn’t figure out why I was getting power to my M2 top stage but it wasn’t passing that power to the Volt on the gimbal, it also wouldn’t pass power to the D-Tap ports. I’ve tried switching to 24v on the bottom but no dice. 

I can’t return these batteries. Is there any way to get this to work with the volt? Is there adapter plates I don’t know of? I assume I’m shit out of luck but figured I’d ask. 

there is no need to modify anything in the original part easy installation 

Thanks for your comments 

I have a GPI Pro Sled upgraded to HDSDI with a DBI. I sent it to Tiffen to install the Volt and they are having a hard time figuring out how to mount the Volt brains. Has anyone run into this issue and had a solution?

I have the mounting bracket for an MDR for the DBI that I just sent over to them, but from what I hear that might not be the most secure option.

Thanks in advance!

Vino

price 75€ + shipping cost 

made in Spain EU 

paypal 

jorgesteady@gmail.com