Brackets/Widgets Latest Topics

Cam Jam Quattro - Center Post Spacer 3D print

Tue, 13 Dec 2022 18:09:20 +0000

Hey guys,

looking to get a Cam Jam Quattro and wondering if I could 3D print the spacers for the Center post? Seeing as they only fill a gap I’m wondering if that would be a suitable solution?

3D printable cinetronic level pro mount

Fri, 04 Apr 2025 02:13:41 +0000

Modeled up a mount similar to the aluminum ones that use to be available for anyone that still uses a Cinetronic 2 and level, but never had the pro mount. Pass through 4-40 holes mount the bracket to the sled at the lower pro post connector and modeled 4-40 holes to mount the level to the bracket.

Printed with 100% infill it is a nice solid bracket. Took about 25min to print on a MK3s Prusa.

Cinetronic Level Mount v2.stl

Dismantling Ultra Dock

Sun, 19 Jan 2025 18:42:42 +0000

Hi guys

I have an Ultra dock with a loose bolt.

It's the bolt that connects the triangular shaped section to the reciever section.

If anybody can help me open this up, that would be great!

Thanks

Rods

Mon, 23 Dec 2024 20:13:19 +0000

Just curious, anybody know / recommend a reputable 3rd party for making the following rods

2x 6”

4” 3” rods

figure with 1 male threaded and 1 female threaded per rod. That way, many choices for various accessories

thanks.

M2 Low Mode Monitor Rods

Mon, 01 Apr 2024 23:04:24 +0000

I want to mount a monitor to the accessory mounts on the front of my M2 top stage, but I can’t seem to find compatible rods with the correct threading. Tiffen sells them, but for an insane price. Is there a more affordable version out there? Tried talking with B&H support but they couldn’t help.

f/j bracket needed for Actioncam sled

Wed, 12 Oct 2011 07:10:30 +0000

I am currently flying an older Actioncam Zero G sled with an arm post size of 3/4". Maybe I am looking in the wrong places but I cannot find an f/j bracket that will fit my sled. Traditionally I fly older heavy 35mm cameras that require the usual f/j bracket design so a poorly executed design will not work. Is there anyone out there with a similar problem or a way to create/design a f/j bracket that will fit my thicker post.

Thanks.

ARRI Stabilizer Plate for CBP

Thu, 17 Feb 2022 21:55:09 +0000

Has anyone tried to use the ARRI Stabilizer Plate directly to their Tiffen rig's Top Stage and loosing the dovetail plate?

https://www.arri.com/en/camera-systems/mechanical-accessories/camera-support-systems/support-systems-for-arri-cameras/support-systems-for-alexa-mini#product-K2.0014981

MK-V docking collar bracket 2" broken plastic

Sat, 28 Jan 2023 11:59:46 +0000

Hey guys,

I have this MK-V docking collar with remains of some plastic on top that I want to fix.

Could someone please measure the dimension of the plastic on top.

Is there a way to buy it or print it?

Thanks

Regards

Miro

What HME’s do people recommend?

Tue, 23 Jun 2020 15:21:00 +0000

I am looking to buy an HME setup and am lookong for input from folks. What do you like? I’ve heard there are some less expensive ones that are good.

15mm rods to MDR4 bracket

Sun, 12 Jun 2022 12:07:43 +0000

Hello all. Does anybody know where I could buy a 15mm rod to MDR4 bracket?

Thanks in advance.

Docking collar for tiffen bracket

Thu, 12 May 2022 15:06:45 +0000

Looking for a docking collar for the old tiffen bracket. Would even be open to 3d print files. My post measures 1.59". Photos of the bracket attached.

RED Quick release-Steadicam

Sat, 26 Mar 2022 10:53:06 +0000

Hello colleagues, I'm looking for a Stedicam plate with RED Quick release.

Can someone recommend me something compact?

Thanks very much,

used hill 1.75 docking bracket

Fri, 11 Mar 2022 03:11:02 +0000

Looking for used hill docking bracket, 1.75. New York based, will pay for shipping out side of New York. Any leads or offers are welcome. Thanks!

Hill Docking Ring for Pro Collar

Mon, 22 Mar 2021 17:50:19 +0000

Hi, I'm searching in the forum but can't find which Collar size I have to buy to put the collar over my PRO locking part under junction box, to use a Gorelock 2 as Docking bracket.

I see lots of operators putting Hill collar on the locking part, but I want to be sure about the size to order!

Thank you very much,

Luca

BNC cable making kit?

Sat, 30 Mar 2013 18:57:21 +0000

Does anyone have a recommendation for a kit to start making BNC cables for HD-SDI? There seem to be a lot of choices at varying price points.

I'm not really looking to save money on cables; I just want more control over my cable length at my leisure. I know there are a lot of you out there with cable OCD!