Premium Members Markus Rave Posted July 1, 2009 Premium Members Report Share Posted July 1, 2009 I am using an AJA downconverter HD10MD3 with my Steadicam. The signal goes straight from the Red One´s HD-SDI out into the converter and from there via composite signal into my Transvideo Cinemonitor III. I had trouble before when having the converter on the same circuitry as the Red One but then I split the circuits and everything was fine. Was. Now the picture is just black and white. No color. I stepped through every page in the Red, tried 1080p and 720p but always the same result. Do I miss anything? Markus Quote Link to comment Share on other sites More sharing options...
Premium Members Andrew Jansen Posted July 1, 2009 Premium Members Report Share Posted July 1, 2009 I am using an AJA downconverter HD10MD3 with my Steadicam. The signal goes straight from the Red One´s HD-SDI out into the converter and from there via composite signal into my Transvideo Cinemonitor III. I had trouble before when having the converter on the same circuitry as the Red One but then I split the circuits and everything was fine. Was. Now the picture is just black and white. No color. I stepped through every page in the Red, tried 1080p and 720p but always the same result. Do I miss anything? Markus Check your monitor for PAL or NTSC... Just a thought !! Andrew Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.