Premium Members Niklas Östling Posted March 17, 2010 Premium Members Report Share Posted March 17, 2010 Having problem with my gimbal. Got perfekt static balanse, and after i wipp-pan the sled gets out of balance. And doing another wip-pan the sled goes back to perfect balance againg. Something i happening with the sled and I cant find out what. But i suppose it is the bearings. Anyone know where to order new bearings to the efp gimbal and mayby know the part#. // Niklas Quote Link to comment Share on other sites More sharing options...
Premium Members Rob Vuona SOC Posted March 18, 2010 Premium Members Report Share Posted March 18, 2010 Having problem with my gimbal. Got perfekt static balanse, and after i wipp-pan the sled gets out of balance. And doing another wip-pan the sled goes back to perfect balance againg. Something i happening with the sled and I cant find out what. But i suppose it is the bearings. Anyone know where to order new bearings to the efp gimbal and mayby know the part#. // Niklas Could be your bearings but most likely just an adjustment in your Gimbal. Call Mike over at Tiffen/Steadicam he fixed mine, when it was doing the same thing Quote Link to comment Share on other sites More sharing options...
Premium Members Peter Milanov Posted March 18, 2010 Premium Members Report Share Posted March 18, 2010 Also, don´t forget to change your username to your real name... :rolleyes: Quote Link to comment Share on other sites More sharing options...
Paul Kellett Posted March 18, 2010 Report Share Posted March 18, 2010 I had the same thing with my Pilot Gimbal, lens pointing left and i could balance level, spin 180 degrees, lens pointing right and the lens was pointing down. It was my gimbal not centered properly. The Ultra 2 manual, specifically the gimbal centering part tells how to fix it. I needed a special tool to adjust the bearings, i didn't have such a tool so i made one, a flat head screwdriver cut down the middle of the head, so now it has 2 pionts instead of a flat head. Link to the Ultra 2 manual below. Hope it helps, Paul. http://www.steadicam.com/images/content/U2_GimbalCentering.pdf 1 Quote Link to comment Share on other sites More sharing options...
Michael_Craigs Posted March 18, 2010 Report Share Posted March 18, 2010 Having problem with my gimbal. Got perfekt static balanse, and after i wipp-pan the sled gets out of balance. And doing another wip-pan the sled goes back to perfect balance againg. Something i happening with the sled and I cant find out what. But i suppose it is the bearings. Anyone know where to order new bearings to the efp gimbal and mayby know the part#. // Niklas Hi Niklas, We can help you out! If you are located in Southern California, please feel free to stop by our factory in Glendale. We can center the gimbal for you while you wait. If you are located elsewhere, please feel free to contact me and I will walk you through some some steps. Best regards, Michael Craigs 818-567-7917 mcraigs@tiffen.com Steadicam 6933 San Fernando Road Glendale, CA 91201 Quote Link to comment Share on other sites More sharing options...
Michael_Craigs Posted March 18, 2010 Report Share Posted March 18, 2010 I had the same thing with my Pilot Gimbal, lens pointing left and i could balance level, spin 180 degrees, lens pointing right and the lens was pointing down. It was my gimbal not centered properly. The Ultra 2 manual, specifically the gimbal centering part tells how to fix it. I needed a special tool to adjust the bearings, i didn't have such a tool so i made one, a flat head screwdriver cut down the middle of the head, so now it has 2 pionts instead of a flat head. Link to the Ultra 2 manual below. Hope it helps, Paul. http://www.steadicam.com/images/content/U2_GimbalCentering.pdf Hi Paul, Thank you for posting this information. Just a word of warning though, the EFP gimbals, along with a handful of other Steadicam gimbals prior to 2007, are centered by placing shims on either side of yoke to balance out the gimbal. All of our units, from Pilot* to Ultra 2, are manufactured with the design described in the link above. Please let me know if you have any questions. Best regards, Michael Craigs *The first run of Pilot's were manufactured with the shim method. Quote Link to comment Share on other sites More sharing options...
Francesco Filippo Posted May 27, 2011 Report Share Posted May 27, 2011 Having problem with my gimbal. Got perfekt static balanse, and after i wipp-pan the sled gets out of balance. And doing another wip-pan the sled goes back to perfect balance againg. Something i happening with the sled and I cant find out what. But i suppose it is the bearings. Anyone know where to order new bearings to the efp gimbal and mayby know the part#. // Niklas Hi Niklas, We can help you out! If you are located in Southern California, please feel free to stop by our factory in Glendale. We can center the gimbal for you while you wait. If you are located elsewhere, please feel free to contact me and I will walk you through some some steps. Best regards, Michael Craigs 818-567-7917 mcraigs@tiffen.com Steadicam 6933 San Fernando Road Glendale, CA 91201 I do have a similar problem, can u help me too? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.