Premium Members David M. Aronson Posted August 28, 2012 Premium Members Report Share Posted August 28, 2012 Rather than make a new thread, I may as well dig up an old one. On my latest job my downconverter died on me at the last minute and I had to spend an hour or so looking into who had a HD-SDI to composite converter. Turns out everyone near me has HD sleds. I ended up driving an extra 100 miles each way to get it. So I bit the bullet and bought an hd-sdi monitor. The next step in this is to get rid of the FLG and DA boards I never use but have to run through so I can run HD down the post. I'm fine with the current topstage (for now) and I don't have the cash on hand to buy a Pro topstage, so Is it at all possible to replace the connectors and cabling with proper 75 ohm parts? do I even need to rerun the wires or can I just find the right molex to match the bottom of the sled and bypass the boards but leave the rest of the cabling? If I do end up recabling the post, any recommendations for what cable to get? If I do end up ripping the sled apart, I'll rewire the power cables so I can power the watt sucking cameras this rig was never designed for. Quote Link to comment Share on other sites More sharing options...
Jason Robbins Posted November 12, 2018 Report Share Posted November 12, 2018 I would love to buy the milled box! If you no longer have any could you share the specs so I could have one made? Thank you. Quote Link to comment Share on other sites More sharing options...
Jason Robbins Posted November 12, 2018 Report Share Posted November 12, 2018 I would love to buy the milled box! If you no longer have any could you share the specs so I could have one made? Thank you. Quote Link to comment Share on other sites More sharing options...
Kevin Kisling Posted May 16, 2020 Report Share Posted May 16, 2020 Even though this thread is old, I would like to chat with y'all about it. I have a master sled and I would love to upgrade to a top stage that is field serviceable or at least one with parts that are available. @Afton Grant do you have any more of those boxes? And if not, who made them for you? 1 Quote Link to comment Share on other sites More sharing options...
Premium Members Imran Naqvi Posted June 24, 2020 Premium Members Report Share Posted June 24, 2020 Do you have the drawings for them still? Quote Link to comment Share on other sites More sharing options...
Justin Woo Posted March 19, 2022 Report Share Posted March 19, 2022 Hi Afton! I know this post is over a decade old, but do you have any of those boxes still available? I have a Master Sled with the same slide in / thumb screw top stage you mentioned. I would LOVE to upgrade the top stage. If you still have one of those boxes, let me know what you might charge for it. justin.woo@gmail.com Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.