Premium Members Mark Schlicher Posted June 25, 2011 Premium Members Report Share Posted June 25, 2011 I ordered the "field-upgradable" Anton Bauer firmware for my Quad 2702 charger. Looked like opening the case would be real easy (a screw on each side of the case) and I'm comfortable pulling and replacing chips. But the case doesn't want to come apart, and I can't see where the hidden screws/clips/brackets might be that are preventing it from opening. I've reached my comfort zone limit when it comes to forcing the case, without some guidance. Can someone walk me through the case opening? Thanks! Quote Link to comment Share on other sites More sharing options...
Premium Members Lawrence Karman Posted June 25, 2011 Premium Members Report Share Posted June 25, 2011 If I recall correctly there is one screw you need to remove from each of the battery plates on top. And don't forget the one up front on top as well. Quote Link to comment Share on other sites More sharing options...
Premium Members Felix Forrest Posted June 25, 2011 Premium Members Report Share Posted June 25, 2011 Hey Mark, I used this for a guide when upgrading mine. Hope it helps. Quote Link to comment Share on other sites More sharing options...
Premium Members Mark Schlicher Posted June 25, 2011 Author Premium Members Report Share Posted June 25, 2011 Thanks, guys. Done! Felix, I've found that AB's website is a bit difficult to find docs on. They sent me the chip without instructions. Did you find this on their website or did tech support send it to you? Quote Link to comment Share on other sites More sharing options...
Premium Members Felix Forrest Posted June 25, 2011 Premium Members Report Share Posted June 25, 2011 They sent me the instructions with the chip. The jpg was a scan. Took around five mins total. I reckon it would have taken an age to work out how to take the case apart without them (unless of course removing all the screws in one go)! Quote Link to comment Share on other sites More sharing options...
Site Sponsor John Ritter Posted June 26, 2011 Site Sponsor Report Share Posted June 26, 2011 I may be a little late in adding to this thread but here are some photo's showing which screws need to be removed. For a full set of photo's showing the cover removal and chip location see: https://skydrive.live.com/redir.aspx?cid=70030689fc4fbc4c&page=play&resid=70030689FC4FBC4C!291 Regards John 1 Quote Link to comment Share on other sites More sharing options...
Dave Hall Posted April 26, 2016 Report Share Posted April 26, 2016 I had the same issue today! I made my own webpage to help the next person who needs to do the update procedure. http://davideo.net/AB 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.