Jump to content

Zephyr roll call


Mark Schlicher

Recommended Posts

  • Premium Members

Oh jeez, I may not get that Marshall then if it seems like its burning out is inevitable... Should I risk it? Or any suggestions for monitors in that sub 2k price range? I'd ideally love the DP7HB but 3k is wayyyyy out of my league at the moment D:

Link to comment
Share on other sites

  • 1 month later...

I've had the Zephyr for a little over a month. I've had a Merlin 2 for about a year. I went to the 2 day workshop in October and had a chance to work with the Zephyr there before buying one. I really like it. I have had some monitor issues with the Steadicam version of the Marshall V-LCD70XHB-3G-SDI. Within a couple of weeks, the HD-SDI port stopped working. The analog video still worked. Steadicam sent me a replacement really fast. The new monitor (same model) is kind of strange. The HD-SDI syncs up very well in the beginning, but then after about 20 minutes when the monitor has warmed up, I have to power it off and on again to resync with the camera when I go between menu modes on the camera. Has anyone else had these issues? Other than the monitor, everything else is great! I'll get some pictures of setup soon.

Link to comment
Share on other sites

  • Premium Members

Also one quick note. I have been told by the guys over at Marshall to plug the monitor prior to powering the camera etc. and to be careful not to have your BNC connected to the monitor touching the ground when building the rig. The thing we are trying to avoid is a static discharge to the sensitive board.

I know it's not a solution but if you can be careful it might let your monitor live a bit longer.

Link to comment
Share on other sites

  • 1 month later...

Hi guys, I fly a Zephyr with a Marshall V-LCD651STI-HDI ( transreflective ) with a modified cable from a sd sled. 40$ SDI to HDMI converter fixed to the back. Untill now, no problems. touching wood... thanks for the advices.

 

DP6 on avatar.. modified after..

Edited by D. Vachon
Link to comment
Share on other sites

  • Premium Members

There is no benefit of having this sled with a stronger arm. The center post being thinner than the standard 1.5 in it start vibrating when it gets overloaded a bit. Besides, the socket block and the gimbal post are smaller than the norm. Thant is why Tiffen sells the sled with the arm+vest as a package.

Link to comment
Share on other sites

  • 1 month later...
I'm from Spain and owner operator of a zephyr.

Wear with almost three years and each time I am more happy with the rig

It's my first rig and with which I have been slowly discovering and learning the profession

At first I was a little scared because I did not know where I could get up capacity rig and now I can say it's amazing


as much as I've been flown to the sony 900r with matebox and follow focus and note that the rig does not suffer if it is true that this was their limit


Sorry about my English

post-11861-0-01454400-1393462799_thumb.jpg

Link to comment
Share on other sites

  • 9 years later...
  • Premium Members

Reviving an old thread to see if anyone has experienced issues with the Trim controls for their Zephyr.

I work with students; we have three Zephyr rigs, two of them brand new. The trim knobs were extremely tight out of the box, I figured they'd loosen up with use, as my M1 felt that way at first. But now one of the Zephyr's side to side adjustment trim was prohibitively tight and has now frozen up completely.

I've reached out to Tiffen, but in the meantime I've curious if anyone else has experienced this issue.  

Cheers~

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...