Jump to content

Betz Top Stage or Pro DB-3?


Billy Green

Recommended Posts

The Betz one was / is sold with the MK-V also.

Howard at some point decided he wanted his own, and had the design copied with some subtle changes and did a run of them. The MK-V copy are all black, the genuine Betz ones are silver / black and have "Betz" on them. I'm fairly sure the copy went away and no more are being made.

 

Rick.

Link to comment
Share on other sites

  • Premium Members

The Betz looks very similar to the one on the MKV. Are they the same basic design? I recently worked with a DP who did his own steadicam and he had a MKV. I really liked the top stage and am considering switching. (I currently have a DB3)

 

David,

 

i will buy your DB3 if you switch. Let me know.

Cheers

 

Quincy

Link to comment
Share on other sites

  • Premium Members

And again, I like that wrench as a safety feature. Steadicams are whipped around, handed off, etc. a quick release can be dangerous. Again, the tool is ONLY used to mout or dismount the camera. All adjustments are tools free.

I whip around as fast as i can, hang it upside down, even used the AR with that topstage at no single issue at all. The clamp is 100% and wond let you down. There is no way this topstage isnt safe, becose it is. Never heard of a failure in all those years. It all comes down about taste. Use whatever you like, with or without tools, for me its Betz, betz and agian betz.

 

J

Link to comment
Share on other sites

  • 1 month later...
  • Premium Members

I'm using BD3 for 4 years now and never have any problemart all. I never try Betz that I can't say anything about it, but I believe is very good too. I'm very happy with my DB3! Good luck and have great fly with your new tops stage don't meter which one you choose. All the best :)

Link to comment
Share on other sites

  • 4 years later...
  • 2 years later...
  • Premium Members

How is this thread holding up?

Any other Converters to the Betz?

I have had a DB3 for years, and before that the DB2 for years and before that the DB1.2?, 3A, 3, Model 1, etc...

I have the Betz Wave, and the Betz Handheld shoulder rig. and I'd love to have all the mounts be the same.

What is everyone thinking at this point 7-8 years later after the Betz top stage came out?

 

I have at one story of vibration from the Betz top stage, causing the op to switch sleds all together.

 

trying to gauge the current thoughts out there before plating some $$$ to TEST something out.

 

If I went with the Betz, I'd always have a set of short rods on there to have the Hill MDR bracket on there.

 

 

Ozzie

Link to comment
Share on other sites

  • 1 month later...
  • Premium Members

I literally just got a Betz top stage. Machining seems extremely nice. I wish there was a 'hard stop' for the clamping mechanism and a safety release that kicks in when the dovetail plate is not already sliding.

Make sure you have those little safety screws on your plate. I have seen a fully rigged alexa just slide out of a betz stage and crash on the sidewalk when a grip who was carrying it accidentally got caught on the release lever.

wasn't pretty.
currently contemplating a DBIIIs for my second sled / superpost. But they seem to be 'slightly' delayed ....

Link to comment
Share on other sites

  • 1 month later...
  • Premium Members

Just got my DB3s.

Can only say they are both fantastic top stages. The DB3s feels like it is built like a tank.
I do like the easy 'secure lock' locking mechanism.
This top stage is slightly longer and presumable a little bit better with potential dovetail flex.

I do like the way the 15mm LW rods attach. They are only screwed in on the Betz, which means if you 
put a motor on on of them without an additional bridge bracket the rods will most probably get torqued off by the motors
and become loose.

The Betz stage has a little bubble level in the back that I dearly miss on the DB3s.

Link to comment
Share on other sites

  • 2 weeks later...
  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...