Premium Members geoff shotz Posted May 22, 2012 Premium Members Report Share Posted May 22, 2012 kit for sale includes: 1x handunit 1x microwave transmitter 2x mdr-1, you can leave one on the rig and the other on the dolly or handheld 2x dm-1 digital motors 2x batteries, need recelling 1x charger 1x microforce with bracket and cable 1x wired remote iris paddle with 10' cable 3x mdr-steadicam brackets 2x 5/8" motor mount arms with clamps 1x 15mm motor mount arm 1x 19mm motor mount arm with clamp 5x asst pitch gears 15x focus rings 9x spare antennas for trx and rcvr 5x r/s cables 2x pana 10-pin, 1x arri/moviecam 3-pin, 1x arri 11-pin, 1x aaton 2-pin 1x 12' fiz command cable for hardwiring 1x 24v (3-pin) mdr power cable 1x 12v (4-pin) mdr power cable 1x pana 24v mdr power cable 1x arri 3-pin power/run-stop y-cable 1x11-pin mdr power cable ALSO: a complete back up in case of problems 2x uhf transmitters, batteries need recelling, can be done at any batteries plus 2x uhf mdr boards, can be easily switched out if there's a microwave problem 4x fast chargers for the transmitters 12v/24v power supply with 1x power cable 2x transmitter/handunit brackets 4x transmitter power cables 1x 12v-transmitter power cable 1x pelican 1600 case with photo dividers. the uhf is an easy, reliable back up if you have any problems. and the 2nd mdr-1 would allow you to add another handunit and have a second system. the only things missing from this kit are motor cables, easy enough to purchase from preston, and a steadicam power cable for the mdr. i'd be willing to go to preston and pick them up if you purchase them. the whole microwave set up was just tested at preston and works well. it is a well loved, well used, reliable system. asking $9500, but reasonable offers will be entertained. pictures available upon request. geoff 310/ 880 2233 Link to comment Share on other sites More sharing options...
Recommended Posts