Jump to content

LOTS OF STUFF FOR SALE, PRO, XCS, MARSHALL, BOXX Cobalt


Recommended Posts

  • Premium Members

BFD Dual Bracket -SOLD

MARSHALL HD/SDI- SOLD

Silveratray -SOLD

PRO Cinema HD Electronics-SOLD

XCS Super post-SOLD

Kamio Kino FLo Power supply- SOLD

BOXX cobalt TX/RX SD ( Standard Definition) system $400

Zoom Risers $55

Transvideo Super bright 4" starlite SD with PRO cable $475

Transvideo Adapter slider plate.

$55 shipped.

BFD Run cable 11 pin fisher connector 26" Long $75

Sony XC-57 B&W SD box Camera with PRO 4 pin Lemo Vid/Pwr cable

$90 shipped ( Cable costs more than that )

NOS ( New old stock) Bolex Rubber Eyecup $15

Vintage Arriflex camera Lapel/Tie pins $20

Pro GPI Gen 1 recorder bracket plate $25

XCS camera plate $275

XCS Alexa adapter plate
Attaches to the bottom of the ARRI BPA-1 camera plate or to the bottom of the XCS/BPA plate.
Attaches to the front and rear of the camera for maximum rigidity $360
XCS/BPA for ARRI Alexa
Replaces the standard ARRI BPA plate with one that allows placement over a wide range of positions on
the XCS camera plates. $150
XCS Dual Rod Telescoping Monitor Support Arm for 2" Post.
Two rail system, Quick release hinged
center post clamp for flipping the monitor for low mode. The posts on this bracket were shortened so that it has 4" of travel, not the standard 5.5". The standard length was too long for me and interfered with the batteries in the rear of the sled. This shortening was done by Greg Bubb himself. Orient-able center post clamp, safety stops on rails. Standard with Kipp handles. $700
XCS standard Gimbal arm $700
If you need pictures of any of the XCS stuff let me know. It's all in wonderful shape.
Link to comment
Share on other sites

  • 2 weeks later...
  • Premium Members

BFD Dual Bracket -SOLD


MARSHALL HD/SDI- SOLD


Silveratray -SOLD


PRO Cinema HD Electronics-SOLD


XCS Super post-SOLD


Kamio Kino FLo Power supply- SOLD


BOXX cobalt TX/RX SD ( Standard Definition) system SOLD


Zoom Risers $55


Transvideo Super bright 4" starlite SD with PRO cable $475



Transvideo Adapter slider plate.


$55 shipped.



BFD Run cable 11 pin fisher connector 26" Long $75



Sony XC-57 B&W SD box Camera with PRO 4 pin Lemo Vid/Pwr cable


$75 shipped ( Cable costs more than that )



NOS ( New old stock) Bolex Rubber Eyecup $15


Vintage Arriflex camera Lapel/Tie pins $20


Pro GPI Gen 1 recorder bracket plate $25



XCS camera plate $275



XCS Alexa adapter plate

Attaches to the bottom of the ARRI BPA-1 camera plate or to the bottom of the XCS/BPA plate.

Attaches to the front and rear of the camera for maximum rigidity $350


XCS/BPA for ARRI Alexa

Replaces the standard ARRI BPA plate with one that allows placement over a wide range of positions on

the XCS camera plates. $140



XCS Dual Rod Telescoping Monitor Support Arm for 2" Post.

Two rail system, Quick release hinged

center post clamp for flipping the monitor for low mode. The posts on this bracket are 5.75" long. The standard length was too long for me and interfered with the batteries in the rear of the sled. This shortening was done by Greg Bubb himself. Orient-able center post clamp, safety stops on rails. Standard with Kipp handles. $700


XCS standard Gimbal arm $700


If you need pictures of any of the XCS stuff let me know. It's all in wonderful shape.


Link to comment
Share on other sites

  • Premium Members

Stuff still left and available.



Silvera Gimbal arm Zoom Risers $55



Transvideo Super bright 4" starlite SD with PRO cable $475



Transvideo Adapter slider plate.


$55 shipped.



BFD Run cable 11 pin fisher connector 26" Long $75



Sony XC-57 B&W SD box Camera with PRO 4 pin Lemo Vid/Pwr cable


$75 shipped ( Cable costs more than that )



NOS ( New old stock) Bolex Rubber Eyecup $15


Vintage Arriflex camera Lapel/Tie pins $20


Pro GPI Gen 1 recorder bracket plate $25



XCS camera plate $250 The rear of this plate has been drilled and tapped to store a 3/8-16 camera screw ( 3/8-16 Screw not included)



XCS Alexa adapter plate

Attaches to the bottom of the ARRI BPA-1 camera plate or to the bottom of the XCS/BPA plate.

Attaches to the front and rear of the camera for maximum rigidity $350


XCS/BPA for ARRI Alexa

Replaces the standard ARRI BPA plate with one that allows placement over a wide range of positions on

the XCS camera plates. $130



XCS Dual Rod Telescoping Monitor Support Arm for 2" Post.

Two rail system, Quick release hinged

center post clamp for flipping the monitor for low mode. The posts on this bracket are 5.75" long. The standard length was too long for me and interfered with the batteries in the rear of the sled. This shortening was done by Greg Bubb himself. Orient-able center post clamp, safety stops on rails. Standard with Kipp handles. $650


XCS standard Gimbal arm $600


If you need pictures of any of the above items not pictured in the beginning post or of the XCS stuff let me know. It's all in wonderful shape.

Link to comment
Share on other sites

  • 4 weeks later...
  • 2 weeks later...
  • Premium Members

Stuff still left and available.



Silvera Gimbal arm ZoomRisers $55



Transvideo Super bright 4" starlite SD with PRO cable $475



Transvideo Adapter slider plate.


$55 shipped.



BFD Run cable 11 pin fisher connector 26" Long $75



Sony XC-57 B&W SD box Camera with PRO 4 pin Lemo Vid/Pwr cable


$75 shipped ( Cable costs more than that )



NOS ( New old stock) Bolex Rubber Eyecup $15


Vintage Arriflex camera Lapel/Tie pins $20


Pro GPI Gen 1 recorder bracket plate $25



XCS camera plate $250 The rear of this plate has been drilled and tapped to store a 3/8-16 camera screw ( 3/8-16 Screw not included)



XCS Alexa adapter plate

Attaches to the bottom of the XCS/BPA plate.

Attaches to the front and rear of the camera for maximum rigidity $350


XCS/BPA for ARRI Alexa

Replaces the standard ARRI BPA plate with one that allows placement over a wide range of positions on

the XCS camera plates. $130



XCS standard Gimbal arm $600

Link to comment
Share on other sites

  • 3 weeks later...
  • Premium Members

Stuff still left and available.

Silvera Gimbal arm ZoomRisers $55

Transvideo Super bright 4" starlite SD with PRO2 power/video cable $425

Transvideo Adapter slider plate.

$55 shipped.

BFD Run cable 11 pin fisher connector 26" Long $75

post-389-0-48334800-1396738315_thumb.jpg

post-389-0-96948700-1396738333_thumb.jpg

Sony XC-57 B&W SD box Camera with PRO 4 pin Lemo Vid/Pwr cable

$75 shipped ( Cable costs more than that )

NOS ( New old stock) Bolex Rubber Eyecup $15

Vintage Arriflex camera Lapel/Tie pins $20

Pro GPI Gen 1 recorder bracket plate $25

XCS camera plate $230 The rear of this plate has been drilled and tapped to store a 3/8-16 camera screw ( 3/8-16 Screw not included)

XCS Alexa adapter plate
Attaches to the bottom of the XCS/BPA plate. This particular one is modified to work with the Alexa Studio as well.
Attaches to the front and rear of the camera for maximum rigidity $320
post-389-0-47048600-1396738745_thumb.jpg
XCS/BPA for ARRI Alexa
Replaces the standard ARRI BPA plate with one that allows placement over a wide range of positions on
the XCS camera plates. $120
XCS standard Gimbal arm $500
post-389-0-37245000-1396736156_thumb.jpg
post-389-0-16948200-1396736195_thumb.jpg

 

Link to comment
Share on other sites

  • 4 weeks later...
  • 2 weeks later...
  • Premium Members

XCS Camera Plate $210 Silver

 

 

XCS/BPA for ARRI Alexa
Replaces the standard ARRI BPA plate with one that allows placement over a wide range of positions on
the XCS camera plates. $120

Sony XC-57 B&W SD box Camera with PRO 4 pin Lemo Vid/Pwr cable

$50 shipped ( Cable costs more than that )

 

NOS ( New old stock) Bolex Rubber Eyecup $15

Vintage Arriflex camera Lapel/Tie pins $20

Pro GPI Gen 1 recorder bracket plate $25

 

XCS Alexa adapter plate

Attaches to the bottom of the XCS/BPA plate. This particular one is modified to work with the Alexa Studio as well.
Attaches to the front and rear of the camera for maximum rigidity $320
Link to comment
Share on other sites

  • 2 weeks later...
  • 4 weeks later...
  • Premium Members

Silvera Gimbal arm ZoomRisers $55 NEW



Transvideo Super bright 4" starlite SD with Artificial Horizon and PRO cable $400 in OEM Transvideo pelican



Transvideo Adapter slider plate.


$55 shipped.



BFD Run cable 11 pin fisher connector 26" Long $75



Sony XC-57 B&W SD box Camera with PRO 4 pin Lemo Vid/Pwr cable


$75 shipped ( Cable costs more than that )



NOS ( New old stock) Bolex Rubber Eyecup $15


Vintage Arriflex camera Lapel/Tie pins $20


Pro GPI Gen 1 recorder bracket plate $25



XCS standard Gimbal arm $500



Paralinx Arrow HD Tx and Rx Standard Not the +, with Crossbow HD/SDi to HDMI box, and the D Tap power cable + all the cables that normally come with it., i.e. Remote, IR cable, USB adapter, Female HDMI Coupler, etc.. $850 complete shipped in the US.



Titan SD system Tx, Rx, with 3db, 6db and 9db Tx antennas and power cables with OEM pelican $650 Shipped to the US.



Ch14 Video SD Transmitter with Antenna and PRO power/video cable. $75 Shipped to the US.



Red Byte Decimator 2 with AC adapter and the little red plate for mounting on stuff. No other cables included. I have two and selling one of them. works perfect. $400. shipped to the US.



Email me if you need any other info or pictures.



Thanks,


Ozzie@silverafilm.com

Link to comment
Share on other sites

×
×
  • Create New...