LOTS OF STUFF FOR SALE, PRO, XCS, MARSHALL, BOXX Cobalt

[Osvaldo Silvera SOC]

Hi folks, Figured I'd put a bunch of stuff on here for sale instead of individual ads...

PRO GEN 3 HD Cinema HD Top and Bottom Electronics with Tally Option, Record out Lemo voltage is regulated 12V not 5V This will allow you to power your Atomos, Nano, Pix240, etc.. at the bottom of your sled.

$4400 without the top Tally sensor, and bottom Tally LED cable

$4600 with the Tally cables

BOXX Cobalt system, ( SD, or component Video Tx and Rx)

Included is...

Boxx Transmitter ( 5Ghz and 2.8Ghz switchable) with AB mounts both sides. It can be powered from a Batt when sandwiched between the batt and camera? or you can power it via the 4 pin Hirose on the Tx via one of the power cables included which are:

Hirose 4 pin to PRO- Vid/Pwr 4 pin

Hirose 4 pin to Hirose 4 pin ( like on the rear of most Broadcast cameras)

Hirose 4 pin to XLR4Male

Hirose 4 pin to P Tap

3 palet style antennas

The system also transmits audio although I never used this option.

Comes with mini xlr 5 pin to standard XLR5Female ( for the audio out of some broadcast video cams

also mini xlr 5 pin to standard headphone male jack

Boxx receiver 5Ghz and 2.8Ghz switchable with 2 antennas

AC Power supply 100V - 240V input 12 V output

Power cable for AC power supply

Breakout Multi Pin cable loom with component connectors, Audio left and right connectors and 4 pin XLR connector.

( I've never used the Multi Pin loom)

The receiver can be powered via the AC power supply, or the Hirose 4 pin connector on the unit. you can use one of the above Hirose connectors to power the receiver and another or AB brick to power the Transmitter.

I had Nebtek install a male side AB plate to one side of the receiver so you can attach it to the back of a monitor, etc.. but it is only there to mount it, not connected internally, I would guess you can install a receiver plate on the opposite side and have it wired like the transmitter so you could attach it behind a monitor and then add a Batt to it and power both, but that would be up to you.

The receiver is powered thru it's 4 pin Hirose like the Tx unit.

Price $950 shipped Priority via USPS to anywhere in the continental US.

Outside of the US, Shipping is not included.

Marshall 7" Monitor HD/SDI with Anton Bauer back

I installed a Transvideo mounting bracket underneath so you can use it with the many monitor brackets out there that have spigots. Great shape, works great!. I only use this monitor indoors on studio live shows, so that's most of the life it's seen. It's not a Daylight bright model, but with a makeshift lens hood I've done well outside with it.

Model #V-R70P-HDSDI with the Anton Bauer back and the Transvideo mounting bracket. $799 shipped in the continental US.

XCS 2" CF Carbon Fibre Super Post with 8 pin Lemo SD PRO cable and PRO/GPI threaded ends.

Comes in rigid canvas covered slip tube/case.

$2400 includes shipping anywhere in the US.

Pictured here with the Pro Lite lower stage and the Top stage and DB on it,

None of those things are included. Only the Super post, cable, and shipping tube. No Docking Bracket, etc..

ZOE ZOOM Riser
Works with ZOE eng zoom controls, the ENG-12 and ENG-8.
When attaching it to my gimbal (XCS)I didn't want it to gouge the cover on the gimbal handle.
I had one of these made to solve that problem. Used it for almost a year and then decided to have more made and have them anodized.
Black Anodized Aluminum. Also helps stiffen the two threaded rods of the Zoe zoom controls. Makes for a nice snug fit.
I use it on the XCS gimbal with the neoprene like sleeve. If your gimbal handle isn't as thick you may try wraping something around the area where this will rest.
$55 shipped

Silvera Tray

This tray slides onto either a panasonic or Sony broadcast cameras' viewfinder dovetail after removing the finder. You can drill the base plate and screw down a Monitor, or velcro a transmitter/receiver to it ( terradek, canatrans, modulus, paralinx, etc..) lots of possibilities. $150 shipped. in the US

Kino Flo Power Supply with 4- pin XLR connector. It operates with 120-230 AC Voltage, and draws 6.5 amps. As equipped, it converts 120V AC power to 12V DC power to operate the Kino Flo 12V ballast (#BAL-140X) using available AC power sources. One 12V Power Supply will run one 12V ballast, which can operate a single Kino Flo tube, in sizes 15" to 4'. Practically new, Retails at $294, selling for $120 shipped in the US.

Transvideo Adapter slider plate.

This Slider bracketcame with my HD6 monitor, it also fits on the Starlite 4" Monitor, Bolts onto the Transvideo monitors and has a sliding 1/4"-20 Brass insert and locking screw with large Transvideo nut.

$65 shipped.

BFD Run cable 11 pin fisher connector 26" Long

$90 shipped

Sony XC-57 B&W SD box Camera with PRO 4 pin Lemo Vid/Pwr cable

Using this cable would power the unit, and feed it SD video from your sled.

Uses C Mount lenses. great to place in a weight cage and practice your moves.

$120 shipped ( Cable costs that )

NOS ( New old stock) Bolex Rubber Eyecup

One is a bit dirty from being moved around for years. If you have a Bolex without a finder, you NEED this!!. $20 each shipped.

Vintage Arriflex camera Lapel/Tie pins

Brought these back from the factory in Munchen many many years ago. Will certainly start up a conversation ...(or stares..) at the next dress up function... ( SOC Lifetime achievement awards) $20 each shipped, take your pic)

[Osvaldo Silvera SOC]

HUGE LABOR DAY BLOWOUT!!!

Last Minute Savings..

Doors are open ! C'MON DOWN, FREE Cuban Coffee for the little ones!

 

Hope everyone had a great Labor Day weekend, whether you worked or not, With health, we can accomplish anything!.

 

Here is an updated list with lower prices and updates on availability and I have added 2 other items, a BFD Dual receiver bracket and a GPI PRO 1 Recorder mount plate I've had for a while.

 

Email me with any interests.

Thank you,

Ozzie

 

ALL PRICES INCLUDE Shipping and Handling via Priority Mail in the Continental US

 

PRO GEN 3 HD Cinema HD Top and Bottom Electronics with Tally Option,

$4300 without the Tally cables

$4500 with the Tally cables

BOXX Cobalt system, ( SD, or component Video Tx and Rx) $890 Shipped.

Marshall 7" Monitor HD/SDI with Anton Bauer back $740 Shipped

XCS 2" CF Carbon Fibre Super Post with 8 pin Lemo SD PRO cable and PRO/GPI threaded ends.

$2200

ZOE ZOOM Riser
$55 shipped

Silvera Tray- SOLD

Kino Flo Power Supply $110

Transvideo Adapter slider plate.

$55 shipped.

BFD Run cable 11 pin fisher connector 26" Long

$75 shipped

Sony XC-57 B&W SD box Camera with PRO 4 pin Lemo Vid/Pwr cable

$90 shipped ( Cable costs more than that )

NOS ( New old stock) Bolex Rubber Eyecup $15

Vintage Arriflex camera Lapel/Tie pins $20

BFD Dual receiver bracket $70

Pro GPI Recorder Mount $30

 

 

[Osvaldo Silvera SOC]

BTTT

[Osvaldo Silvera SOC]

BTTT

BFD Dual Bracket sold, Everything else still available.

[Osvaldo Silvera SOC]

BTTT

The PRO/GPI Cinema HD top and bottom electronics is now $4100 with no Tally cables, $4300 with the Tally cables

The XCS 2" Super Post with PRO threaded mounts and SD cable is now $2000

The BOXX Cobalt system is now $830

The PRO/GPI Generation 1 recorder mount is now $25

 

 

 

Adding a Transvideo 4" Starlite Super Bright SD Monitor with cable for the record out of your PRO.

Perfect for the live guys.

Has the On Screen Level option.

Housing has seen better days but it's a great color bright SD monitor, especially on the outdoor live events. But for the price it can't be beat.

$575 shipped with the cable, Transvideo Slider bracket and original Pelican case.

 

Shown in the pics under the Marshall 7" HD/SDI monitor I'm selling.

here is a link to the features of the transvideo starlite 4"

http://www.transvideo.eu/Starlite/Starlite-SB

 

 

price includes shipping in the lower 48 states via USPS Priority ( Usually 2 day)

[Osvaldo Silvera SOC]

BFD Dual Bracket -SOLD

MARSHALL HD/SDI- SOLD

[Osvaldo Silvera SOC]

BTTT

 

BFD Dual Bracket -SOLD

MARSHALL HD/SDI- SOLD

Silveratray -SOLD

 

Boxx Cobalt is now a ridiculous $700 is paid by Money Order.

$721 is paid by Paypal.

[Osvaldo Silvera SOC]

Hi folks

The Top and Bottom Cinema HD PRO/GPI electronics are now

$3900 shipped in the US via Priority USPS. Signature required

If you'd like them shipped any other way, then you pay for shipping.

Paypal add 2.9%

Shipping is only included in the 48 continental US states.

No Tally cables are included.

[Osvaldo Silvera SOC]

Transvideo 4" Super Bright Starlite is now $475 shipped with the cable and pelican case.

PRO Cinema HD top and bottom electronics sold.

[Osvaldo Silvera SOC]

Pro HD top and bottom electronics sold.

[Osvaldo Silvera SOC]

BTTT

[Osvaldo Silvera SOC]

BTTT.

BOXX Tx /Rx Cobalt Set up $700 shipped in the US.

Kino Flo Kamio AC power supply $50.

XCS 2" Super post with Pro threaded top and bottom $2000 shipped.

[Osvaldo Silvera SOC]

BFD Dual Bracket -SOLD

MARSHALL HD/SDI- SOLD

Silveratray -SOLD

PRO Cinema HD Electronics-SOLD

XCS Super post-SOLD

Still available are the BOXX cobalt TX/RX SD ( Standard Definition) system $650

Zoom Risers $55

Kamio Kino FLo Power supply $50

Transvideo Super bright 4" starlite SD with PRO cable $475

Transvideo Adapter slider plate.

$55 shipped.

BFD Run cable 11 pin fisher connector 26" Long $75

Sony XC-57 B&W SD box Camera with PRO 4 pin Lemo Vid/Pwr cable

$90 shipped ( Cable costs more than that )

NOS ( New old stock) Bolex Rubber Eyecup $15

Vintage Arriflex camera Lapel/Tie pins $20

Pro GPI Gen 1 recorder bracket plate $25

[Osvaldo Silvera SOC]

The Boxx Cobalt system is still available as described in the first post. $550 shipped in the US. Paypal payments add 2.9%

[Osvaldo Silvera SOC]

BFD Dual Bracket -SOLD

MARSHALL HD/SDI- SOLD

Silveratray -SOLD

PRO Cinema HD Electronics-SOLD

XCS Super post-SOLD

BOXX cobalt TX/RX SD ( Standard Definition) system- SOLD

Kamio Kino FLo Power supply- SOLD

Zoom Risers $55

Transvideo Super bright 4" starlite SD with PRO cable $475

Transvideo Adapter slider plate.

$55 shipped.

BFD Run cable 11 pin fisher connector 26" Long $75

Sony XC-57 B&W SD box Camera with PRO 4 pin Lemo Vid/Pwr cable

$90 shipped ( Cable costs more than that )

NOS ( New old stock) Bolex Rubber Eyecup $15

Vintage Arriflex camera Lapel/Tie pins $20

Pro GPI Gen 1 recorder bracket plate $25