Jump to content

Teradek 300 Rx Problems


Recommended Posts

  • Premium Members

My Teradek Bolt 300 Rx has quit excepting a signal. It was working fine earlier today, but then it dropped out. I switched my power cables and everything started to work fine again. About an hour ago it dropped out again. The Tx is sending a signal, but there is no response on the Rx end, not even any lights. The only thing happening is the Blue LED light at the power switch is blinking. Any thoughts what the cause is? I still have one more day on this job and tonight I will attempt to reinstall the firmware and see if that works. I've called Teradek, but there is no response yet since they are closed for the weekend. Thanks for any advice.

Link to comment
Share on other sites

  • Premium Members

My Teradek Bolt 300 Rx has quit excepting a signal. It was working fine earlier today, but then it dropped out. I switched my power cables and everything started to work fine again. About an hour ago it dropped out again. The Tx is sending a signal, but there is no response on the Rx end, not even any lights. The only thing happening is the Blue LED light at the power switch is blinking. Any thoughts what the cause is? I still have one more day on this job and tonight I will attempt to reinstall the firmware and see if that works. I've called Teradek, but there is no response yet since they are closed for the weekend. Thanks for any advice.

 

Hey Aaron,

 

Have you spoken with our Support team? Support@teradek.com

 

As Alan mentioned, it is likely just a small wire that has come loose.

 

Mike

mike@teradek.com

Link to comment
Share on other sites

  • Premium Members

Mike,

 

I called on Saturday when I was trying to troubleshoot the issue, but wasn't able to get in touch with anyone at that time. It was a busy schedule and I didn't have a lot of time to try calling again. Luckily the show always has a spare Starlink system, so I used that the rest of the weekend. Now that I'm home I am going to get in touch today and see about sending it in.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...