John Hatcher Posted April 12, 2015 Report Share Posted April 12, 2015 First, I'm using HDSDI. Today I fired up my rig and my monitor isn't detecting SDI sync. I tested with another monitor from top stage to bottom of the sled and the cabling is fine and outputting fine to second monitor. Now I've tried double checking settings in the Ultra Bright and everything looked ok input-wise. Now the main Input/Config/ graphical menu has disappeared and only the textual video input menu is there. I've powered down many times to see if it would come back and it has a couple of times, just for an instant, then disappears only to leave me with the textual input menu. So, thus I can't get in and try a factory reset. It will go into the beginning of programming mode, but I backed out of that. Any ideas that might help? Gracias ahead of time! J Quote Link to comment Share on other sites More sharing options...
Evrim KAYA Posted April 13, 2015 Report Share Posted April 13, 2015 Hey buddy! did you try to feed the signal through the second hdsdi input? Quote Link to comment Share on other sites More sharing options...
John Hatcher Posted April 13, 2015 Author Report Share Posted April 13, 2015 Hey!! I did, still nothing, the green other back there flashes like it sees signal. Strange... It's most frustrating why the menu won't load. Quote Link to comment Share on other sites More sharing options...
John Hatcher Posted April 13, 2015 Author Report Share Posted April 13, 2015 By hitting Menu and one of the arrow buttons repeatedly, the config menu appears for like one second and before I can change any settings, it disappears again... Quote Link to comment Share on other sites More sharing options...
John Hatcher Posted April 13, 2015 Author Report Share Posted April 13, 2015 Partially fixed it. So was going from a Sony a7s(HDMI)-Shogun-sled(HDSDI) and the cam was outputting 60i. The Ultra bright no likey. After forcing 24p down from cam to shogun, voilà! Now the question... Why no 60i on the Ultra bright? Quote Link to comment Share on other sites More sharing options...
Evrim KAYA Posted April 13, 2015 Report Share Posted April 13, 2015 great news (for now). it is a rehoused boland monitor. the software is theirs. so better ask them i suppose. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.