Premium Members Ramon Engle Posted July 8, 2015 Premium Members Report Share Posted July 8, 2015 Since I've had my gene I've only shot Hd.Shooting film now and can't get an SD signal. I've enabled comp and comp 2, disabled HDMI and SDI. What am I doing wrong? Quote Link to comment Share on other sites More sharing options...
Premium Members Jens Piotrowski SOC Posted July 8, 2015 Premium Members Report Share Posted July 8, 2015 Some of them had an incorrect resistor on the main board and needed to be replaced by Chris to except Analog video. Try a full reset otherwise it needs to go back for repair. Comp2 is the 8pin input. Or cross-convert from Composite to SDI. http://www.bhphotovideo.com/c/product/1005909-REG/aja_v2digital_a_to_d_hd_sd_sdi_mini_converter.html this might by the fastest route...... Quote Link to comment Share on other sites More sharing options...
Premium Members Jarrett P. Morgan Posted July 8, 2015 Premium Members Report Share Posted July 8, 2015 Ive had a bit of an issue with my Gen 1 analog input through the 8 pin lemo. I put the composite through the post to the bnc connector and attached it directly to the composite BNC in and got an image. Just a thought. Quote Link to comment Share on other sites More sharing options...
Premium Members Jens Piotrowski SOC Posted July 8, 2015 Premium Members Report Share Posted July 8, 2015 Gen 2 is a completely different animal. Quote Link to comment Share on other sites More sharing options...
Moderators Alec Jarnagin SOC Posted July 8, 2015 Moderators Report Share Posted July 8, 2015 Composite SD is fine on mine. Send it in as Jens suggests. Quote Link to comment Share on other sites More sharing options...
Premium Members Jarrett P. Morgan Posted July 8, 2015 Premium Members Report Share Posted July 8, 2015 Gen 2 is a completely different animal. Copy that! Quote Link to comment Share on other sites More sharing options...
Premium Members John Joyce Posted August 19, 2015 Premium Members Report Share Posted August 19, 2015 I've been on a film show for the past 6 years and I've always used the Comp 2 input via the 8 pin on my Gen2. I went to prep another film job last week and the Comp 2 was not giving an image. The Comp 1 worked, but it's strange that the Comp 2 input that has worked for the past 6 years stopped functioning. I did do a full reset, but no luck. Looks as though it will have to go in for repair... John Quote Link to comment Share on other sites More sharing options...
Premium Members Aaron Medick SOC Posted August 20, 2015 Premium Members Report Share Posted August 20, 2015 Are you sure it's an SD tap? I spent a few minutes chasing my tail on a film job. Until the AC pointed out it was an HD tap. For what it's worth SD works on both my gen1 and 2. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.