Daniel Lassnig Posted September 24, 2015 Report Share Posted September 24, 2015 (edited) Hi guys :) i'm searching for a wireless HD video transmitter with tally for a sony pdw-700 or/and sony pmw-800. I don't want a external tally light - i want to use the camera tally. ... maybe also with intercom - but not a must. I don't own a CCU for this cams. Is there a system less than 10.000$ on the market? The range should be about 650 to 1000 feet. Thank you and best regards! Edited September 24, 2015 by Daniel Lassnig Quote Link to comment Share on other sites More sharing options...
Premium Members Osvaldo Silvera SOC Posted September 25, 2015 Premium Members Report Share Posted September 25, 2015 Hello there Daniel, What your looking for, As you described it, does not exist for your price range. You can source a Boxx Meridian system with the broadcast receive antennas to send out the Signal, and then get the separate Data /Tally sender which will connect to the CCU in the control room and allow you to control the date on the camera as well as Iris and if wired properly, trigger the tally. But even getting a super deal on both things, your still over 10K for heavily used units, add cable runs, etc... and your closer to 20k. if your just looking to send the signal but you control everything on the camera then a sender alone would work. Is there a reason your using the pdw-700 or pmw 800 ? are you recording in the camera? Ozzie Quote Link to comment Share on other sites More sharing options...
Daniel Lassnig Posted September 25, 2015 Author Report Share Posted September 25, 2015 (edited) Thank you for your reply Ozzie! :) We use the 700 or 800 cause we have the cameras already in the company. There is no remote control (iris, color,...) necessary ... the cameraman is controlling this manualy on the camera. So i don't want to buy a CCU. Like EB. For me/us is important to get a tally light into the wireless camera. Right now, if we using a normal HD-SDI wireless transmitter, the camera heras only over the radio is he is on air. Systems for wireless tally (external tally device on the camera) are also available on market but i don't now how to get the tally signal in the camera. I saw the IDX CW-F25 - it's about 8000$ but (i think) also without tally. Thank you a lot! :) Edited September 25, 2015 by Daniel Lassnig Quote Link to comment Share on other sites More sharing options...
Premium Members Dan Kanes Posted September 25, 2015 Premium Members Report Share Posted September 25, 2015 Maybe check out the Teradek Beam ? I think it does everything you want it to including IFB http://teradek.com/pages/beam Quote Link to comment Share on other sites More sharing options...
Andrew Ng Posted September 29, 2015 Report Share Posted September 29, 2015 Hi guys :) i'm searching for a wireless HD video transmitter with tally for a sony pdw-700 or/and sony pmw-800. I don't want a external tally light - i want to use the camera tally. ... maybe also with intercom - but not a must. I don't own a CCU for this cams. Is there a system less than 10.000$ on the market? The range should be about 650 to 1000 feet. Thank you and best regards! Hey Daniel, Definitely feel free to give myself or any of my Teradek colleagues an email or call. As Dan Kanes mentions, the Teradek Beam may be a solution. It was created to be a wireless video transmitter with more broadcast oriented features including RS-422, Ethernet and yes, IFB. That being said I know the Beam has been utilized in many cinema scenarios as well. One of our engineers can talk through the specifics of your cameras and how we can get tally through. Andy@teradek.com is my email if you want to get in touch. Quote Link to comment Share on other sites More sharing options...
Premium Members Matthias Biber Posted September 29, 2015 Premium Members Report Share Posted September 29, 2015 RS-422 is of no use. Sony uses a modified RS-422 protocol for comunication between camera and ccu. Andy, did you ever sucessfuly use your beam to connect a ccu to a camera? If yes, please let us know the settings for the beam. Thanks Quote Link to comment Share on other sites More sharing options...
Andrew Ng Posted September 29, 2015 Report Share Posted September 29, 2015 Matthias, we are aware of Sony utilizing a modified RS-422 protocol. We're looking into supporting Sony's non-standard bit rate, but no promises there just yet. Current suggestion would be to try utilizing a CNA1, but we understand it's not ideal. That being said, we've successfully hooked up a Panasonic ENG via RS-422 to an RCP box. The current Beam manual explains the options available, but it doesn't exactly spell out the steps to CCU/Camera connection. Check out page 13/14 for the options. You can download it here. It seems like it's a case by case for these cameras out there nowadays, never the same steps for each one. That's why I do suggest getting in contact so our engineers can chat with you first to really dig into a workflow. Not just trying to make a sale, but actually interested in spending some time to really investigate the ideal workflows for CCU/Camera communication so we can make any adjustments where need be. Quote Link to comment Share on other sites More sharing options...
Joris Robijn Posted November 25, 2015 Report Share Posted November 25, 2015 Hi Andrew, Modified the protocol? I know that Sony flips between odd and even parity settings in the middle of the command. However, there is an easy way around that: just also send the parity bit itself. Don't check the partity, just send the bit. The camere will then receive what it expects. As far as I know for the rest it's just standard 38400 baud RS-422 or RS-232. Joris Quote Link to comment Share on other sites More sharing options...
David Thåst Posted April 13, 2016 Report Share Posted April 13, 2016 Any updates on this matter? I'm regularly using a PDW700 as well (and a HDCP1) and would really want to start using our Beam more frequent. Without the RCP telemetry part, we still rather use the IDX CW-5HD due to the latency. Vislink started to fully support the PDW700 for it's L1500, even with tally, without any box-in-the-middle for quite many years now.Regards,David 1 Quote Link to comment Share on other sites More sharing options...
Premium Members William Demeritt Posted July 16, 2016 Premium Members Report Share Posted July 16, 2016 I too am interesting if the Beam can support Sony cameras yet? I'll give Andrew a buzz, maybe they have some new information? 1 Quote Link to comment Share on other sites More sharing options...
Joris Robijn Posted May 1, 2019 Report Share Posted May 1, 2019 (edited) I would love to see more integration of additional links. I don't see why technically it would not be possible to use the same link to have also: - serial communication (this is low rate) - tally (very low rate) - intercom (also relatively low rate compared to the video data or the existing uncompressed audio data) - reference (requires a timing offset (to incoming ref signal) to be transmitted in the radio package) - and why not even a half-res return feed or full res with compression Then finally there is an all in one solution. Now you need a separate device for each... Any device that would offer a proper product with more links integrated will have fantastic sales. Did anyone maybe already find a device that has some link integration? (apart from the Beam) Joris Edited May 1, 2019 by Joris Robijn Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.