Premium Members Hani Arab Posted October 18, 2015 Premium Members Report Share Posted October 18, 2015 This kit originally started as a complete Glidecam V-25 kit designed for film and video cameras weighing from 10 to 25 pounds. The complete system is comprised of a Support Arm, Vest and Sled. Then the upgrades added included: -Titanium block -MKV Adjustable Monitor Mount for Sled -Transvideo Cinemonitor IIIa SuperBright is 1200Nits -Low-Mode Kit -Gold Vest -X45 Arm -Many cables to power 4-Pin XLR, DC Barrel Power, Bartech FF, etc. All items come in custom foamed Pelican 1650 cases (2 Cases) -1 Holds slide and arm, Dock -1 Holds Vest, low mode and monitor & accessories No Batteries Included (Currently setup for V-Locks) $7500 USD Details regarding arm: The Glidecam X-45™ sled holds any video or 12 volt film camera weighing up to 45 pounds. The X-45 Sled incorporates sophisticated engineering and precision machining to make it lightweight and strong. Three dedicated video BNC connections are located on the base and head assembly. The Glidecam X-45 central post power/ video cable can handle composite video, component video and HD-SDI video. Two 2-pin Lemo connectors are also located on the base and head assembly. The two on the base are for accessories. The head has one for camera power and the other for camera accessories. The precision, x-y adjustable Head assembly incorporates a drop in style dovetail camera plate for quick front to back balance. Very, fine tuning, ergonomic knobs control front to back and side to side balance adjustments. The Sled’s “no-tools” precision Gimbal is made to top of the line quality. The Gimbal incorporates 4 bearings inside the handle to yoke connection (the tilt axis). There are 2 bearings on each side of the yoke, providing 4 bearings for the roll axis. A very tight knurling has been machined onto the Gimbal Tube to improve handling. An easy to replace soft foam covers the handle grip. The Glidecam X-45 Sled has a strong and rigid 1.75” central post, and a “no-tools” Telescoping Post. This allows you to easily adjust the sled length and position of the LCD and batteries. The Glidecam X-45 base platform can be set up with two-three Anton Bauer or V-Mount style batteries. Link to comment Share on other sites More sharing options...
Premium Members Hani Arab Posted October 20, 2015 Author Premium Members Report Share Posted October 20, 2015 Additional photos of Arm and custom foamed pelican cases. Link to comment Share on other sites More sharing options...
Premium Members Hani Arab Posted March 8, 2018 Author Premium Members Report Share Posted March 8, 2018 SOLD Link to comment Share on other sites More sharing options...
Recommended Posts