Premium Members Devin Ladd Posted January 2, 2016 Premium Members Report Share Posted January 2, 2016 I am regretfully selling my amazing starter sled, the Ultra 1. I am selling because I recently upgraded to a more powerful rig to eventually get the artemis trinity setup. I also am expecting a baby boy in april so I need to make some room! I bought this sled from James Baldanza a few years back and it has been nothing but great. I am looking to get $12,000 for the sled (and hard case), a steadicam stand, IDX Battery Charger, (7) E-HL9s IDX Batteries (one of which charging lights doesn't work anymore), a bunch of cables, and I am throwing in the IDX Camwave HD/SDI wireless transmitter which even though you don't see around anymore still works in a jam. The sled was recently serviced by Tiffen, I have had it upgraded with an HD/SDI line, as well as changing out the old gimbal to the new steadicam ultra 2 gimbal. There is a third battery plate on the bottom of the sled, and has three different options for battery placement for power. This sled is a super post (27" to 71") so it can go super high mode or super low mode very quickly and easily. It still has the fore/aft - left/right top stage wireless trim control which is one of the few sleds that still has this amazing option. The tilt stage works like a wonderfully and maintains dynamic balance regardless of where you want to angle the camera. I bought an HD/SDI wondland monitor to replace the super bright monitor from Tiffen because it was an older SD monitor and I wanted the HD. It is a cheaper monitor, but works wonderfully and I have rarely had a problem with the light. It can be powered off the sled or with an IDX battery on it's back. This setup also comes with three camera plates (two long and 1 short), three posts (12", 3.5" and 5"), the ultra 1 low mode handle which has been upgraded to work with this ultra 2 gimbal, a 12V power cable, arri alexa power cable, a few BNC cables, the redbyte decimator downconverter (for use with Tiffen superbright as a backup), cables for the decimator made by konash, and also power cables for MDR2 and MDR3 systems. Please feel free to call or email with any questions. Devin Ladd 860-237-0754 devinmladd@gmail.com 1 Link to comment Share on other sites More sharing options...
Premium Members Devin Ladd Posted January 21, 2016 Author Premium Members Report Share Posted January 21, 2016 Price reduction $11,000!! Link to comment Share on other sites More sharing options...
Premium Members Devin Ladd Posted March 23, 2016 Author Premium Members Report Share Posted March 23, 2016 So many people interested but no one closing. Need to sell! Price Reduction to $8,000!! Link to comment Share on other sites More sharing options...
Premium Members James Baldanza SOC Posted March 23, 2016 Premium Members Report Share Posted March 23, 2016 That's a great price and solid sled! Link to comment Share on other sites More sharing options...
Premium Members Devin Ladd Posted April 13, 2016 Author Premium Members Report Share Posted April 13, 2016 Bump!! Link to comment Share on other sites More sharing options...
Premium Members Devin Ladd Posted May 15, 2016 Author Premium Members Report Share Posted May 15, 2016 Sold! Link to comment Share on other sites More sharing options...
Recommended Posts