Jump to content

Storing your gear in a cold area.


Victor Lazaro

Recommended Posts

  • Premium Members

I would worry more about the humidity for the metal components. The temp could certainly mess with monitors and things with screens: too cold and the liquid freezes and cracks the screen.

 

I would shy against it. I have an external storage room that I keep my cart and stand in, but that is it.

Link to comment
Share on other sites

  • Premium Members

Yeah I would avoid it too unless absolutely necessary, or if you had a way to control humidity and condensation when the temp goes from cold to warm.

 

If everything's cased up and you warm up really slowly, you might be ok, as condensation *should* only form on the outermost layer, but still... kinda risky...

Link to comment
Share on other sites

An aircraft hold can be very chilly and extending the period will not make much difference - except batteries of course. I would take batts and monitor inside to avoid damp and just keep a check on things like screws coming loose. I would be more worried about damp or warm damp conditions.

 

Robin

  • Upvote 1
Link to comment
Share on other sites

  • Premium Members

Thanks everyone for all you awesome answers! (Might I add that you guys were much more precise here than on Facebook, yet another proof that this forum has a real purpose vs the selfiebook group)

I already have a large electric dehumidifier that I will place in the room with the gear, that should take care of the moisture and might raise the temperature by a few degrees.

Link to comment
Share on other sites

  • Moderators

Victor

 

Here's my two cents worth.

 

If this is a typical garage with minimal insulation any dehumidifier is not going to do much, your pretty much dehumidifying the who world.

 

Second, I'd worry more about security; I've had more crew members put their gear in garage in a locked vehicle to save some time in the morning and it works for a while but there is always that moment when one morning it's gone. Audio guy, couple of camera guys had it happen in an urban/city world.

 

Unless there is some bigger inside cage and massive locks etc it may not be worth the risk. There is always someone checking out garages as they drive by so don't think gear will go unnoticed.

 

I often miss details but cold may affect LCDs and batts; not sure.

Good luck.

 

Janice

Link to comment
Share on other sites

  • Premium Members

Hi Victor

 

Very good question, excellent answers! Thanks!

I had a situation yesterday where we shot outside in the cold, than hopped in a heated car, went to an other locations shot outside again back to the car and so on. Each time about half an hour in cold, 15 minutes in warm.

Camera and monitor worked perfectly, but a couple of screws came loose on my vest and a buckle fell off by the last shoot.

Must add that I didn't check on those screws the night before, since they always seemed pretty tight to me. (LX vest, load was not heavy)

 

Best,

Peter

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...