Premium Members brett.mayfield Posted January 28, 2016 Premium Members Report Share Posted January 28, 2016 Hi yall When we flip the CineLive into 24v for using ARRI and other cameras, do the upper electronic switch out to 24v exclusively? I am having cables made for a Chrosziel MagNum receiver and am wondering if I need a 12v and 24v cable, or 12v only. The receiver does not care whether it receives 12v or 24v, it will push voltage independent of whats coming in. Try as I might, I have a difficult time understanding electricity. brett. Quote Link to comment Share on other sites More sharing options...
Premium Members Jarrett P. Morgan Posted January 30, 2016 Premium Members Report Share Posted January 30, 2016 Brett,If the device that you are powering can take 12v (and is fairly low amperage, i.e. not a power hungry camera) I tend to do all 12v cables out of the sled. I do this because the pro sled is always spitting out 12v out top, but there are situations in which you wouldn't be able to do 24v out at all (having a camera like the F65 that need so much 12v amperage you have to run both batteries in parallel) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.