Teddy Smith SOC Posted February 1, 2016 Report Share Posted February 1, 2016 Hello everyone. I did some searching and saw a few other posts about this subject but I couldn't find a solution other than to call Tiffen. Anyway, the blue piece that connects the handle to the gimbal on my Zephyr is loose and has a lot of play in it. After just a few days of use the screw will back all the way out and come apart. I know I can tighten it down by taking the handle off but if I tighten it too much the blue piece binds up and doesn't swing freely. If I tighten it just enough so it doesn't bind there is still quite a bit of play in the connection and the screw backs out after a few days. It's almost as if there is a spacer or something missing. Any suggestions? Is the play in the handle normal and I should just add some lock tite to the screw? Quote Link to comment Share on other sites More sharing options...
Teddy Smith SOC Posted February 1, 2016 Author Report Share Posted February 1, 2016 (edited) Attached is a picture of the blue thing I am talking about. http://imgur.com/pe1vFbJ P Edited February 1, 2016 by Teddy Smith SOC Quote Link to comment Share on other sites More sharing options...
Premium Members Victor Lazaro Posted February 1, 2016 Premium Members Report Share Posted February 1, 2016 Use some purple Loctite on the screw, it should prevent it from getting loose again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.