Premium Members Dean Gunderson Posted July 16, 2016 Premium Members Report Share Posted July 16, 2016 Model III sled w/ telescoping post and side to side adjustment Extra base with gutted electronics, wired for 12v Dual Anton Bauer battery module, mounts on either base Transvideo Cine Monitor !!!a SB, 1200nit SD w/ yoke and Anton Bauer mount Pro(?) monitor arm Panavision and Arri baseplates J-Bracket Low mode cage plates Wrap grip Thermodyne flight case (worn foam, but usable) J box and J box to base extension cable Compact vehicle mount kit Manual including schematics and parts list Original battery base assembly and monitor arm Box o’ III spare electronics The sled is in great shape and solid, gimbal is smooth and pans flat. There’s worn anodizing where the wrap grip clamps. Fore and aft adjustment on the top stage and base. The original base shows little wear. The monitor is very bright and sharp, and the horizon works great. The second base is gutted (sorry, Terry) and wired for 12v parallel. I left a wire to run 24v to pin 3 on the J-box if you want to do that. The battery module is two diode and 10A breaker switch protected AB mounts and solidly mounts to either base. Total weight with gutted base, monitor and no batteries (as pictured) is about 12 lbs It comes with the compact vehicle mount kit that seems unused. The assembly instructions were still inside one of the tubes! Not sure if the monitor arm is a PRO, maybe an old version. It does flip for low mode the same: with two registration pins to keep it solid. A great starter sled or backup / big rig sled. You are welcome to try it out in the LA area, but if you aren’t around 6’5 and 200 lbs, you’ll need to bring a vest. $2,500 1 Link to comment Share on other sites More sharing options...
Premium Members Nikolay Kerezov Posted July 17, 2016 Premium Members Report Share Posted July 17, 2016 Great Rig! If this was located in EU I would of give it a go ! Link to comment Share on other sites More sharing options...
Premium Members Dean Gunderson Posted September 18, 2016 Author Premium Members Report Share Posted September 18, 2016 Price drop to $2,200 1 Link to comment Share on other sites More sharing options...
Premium Members Dean Gunderson Posted November 17, 2016 Author Premium Members Report Share Posted November 17, 2016 Price drop to $2000. Link to comment Share on other sites More sharing options...
Premium Members Scott Baker Posted December 21, 2016 Premium Members Report Share Posted December 21, 2016 Sell vehicle mount separately? Link to comment Share on other sites More sharing options...
Recommended Posts