Premium Members Jake Iesu Posted February 28, 2017 Premium Members Report Share Posted February 28, 2017 I have a question regarding the dynamics involved with Balancing the rig. I have noticed that often (if not all the time) when I balance the rig on the Hill bracket and dock in order to pick up the sled I then will have to do some minor tuning of the balance when the sled is mounted to my body via the arm. The adjustments are allways very minor, maybe 1/8th of a revolution of the DBIII knobs yet I constantly find myself having to make that minor balance adjustment, It is rather insignificant but it does take time and i'm curious to what could be causing this. The Gimbal has just come back from a major service from pro. Both the fore and aft and side to side seem to need this minor tweak. Is their a logic to this or does the problem exist purely between the vest and the ground. regards. Quote Link to comment Share on other sites More sharing options...
Premium Members Simon Blouin Posted March 2, 2017 Premium Members Report Share Posted March 2, 2017 (I actually just found the same matter on my DBIII, and I just received it back from a service as well. I'll follow that post...) Quote Link to comment Share on other sites More sharing options...
atefamiri Posted March 9, 2017 Report Share Posted March 9, 2017 Hi guys Do you have a bubble level on the top stage ? I had this problem too Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Premium Members Jake Iesu Posted March 10, 2017 Author Premium Members Report Share Posted March 10, 2017 Hi guys Do you have a bubble level on the top stage ? I had this problem too Sent from my iPhone using Tapatalk Did you solve your issues? I have three on my rig. Two on lower electronic box next to post (fore aft and side x side) and the other is screwed into the 1/4" thread on the underside of my yoke mounted monitor. None on the top stage . Quote Link to comment Share on other sites More sharing options...
atefamiri Posted March 10, 2017 Report Share Posted March 10, 2017 The bubble level on top it was not correct , one day I realized that sled is not really in horizontal position but bubble level was fine , so I decided to do the horizontal level without bubble level and I check it with stand to be in same position Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.