Premium Members Lohengrin Zapiain Posted October 13, 2017 Premium Members Report Share Posted October 13, 2017 I recently made a few modifications to my sled and I also joined the Wave comunity. I have now a very strange bouncing on the sled, is only vertical and very rithmic, almost like the sled has a hearth bit. I tried unpluging the Wave and doferent configurations and is still there. Wondering if somebody heard of this before, This is what I recently did with my sled (Ultra): Git rid if the tilt stage Serviced the gimbal with Robert Luna Added an SDI line Switched my Ultra brite to an HD 703 Any leads apreciated Quote Link to comment Share on other sites More sharing options...
Premium Members Lohengrin Zapiain Posted November 13, 2017 Author Premium Members Report Share Posted November 13, 2017 So I managed to find the issue with a lot of help from a few friends. My gimbal has an issue on the bearings on the arm side The issue started after the gimbal was serviced. Other than that Im bery happy with the conversion, pretty small distance to the CG of the camera with the Wave on and I also went full 12v on the sled to get rid of any power issues. Still waiting to hear if anybody has gone through something like this Quote Link to comment Share on other sites More sharing options...
Premium Members axel ebermann Posted November 15, 2017 Premium Members Report Share Posted November 15, 2017 So did you solve your issue ?Every single stabilized 'gimbal on a stick' - wave, trinity you name it - has a bit of that 'side-to-side' weaving. Basically the roll axis stabilization keeps your horizon straight. but the camera still moves a bit side-to-side as the sled goes off balance. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.