Premium Members Michael Suchar Posted February 6, 2018 Premium Members Report Share Posted February 6, 2018 Custom Franken Rig for Sale Great opportunity for student or Indi Film Makers on a budgetRig was used lightly for few years for Law Enforcement, Aero Space Videos, Concerts, Church Events.Looking for $1500.00 OBOI have been working on this rig for a while and it has served me well. It's built with manySteadicam and PRO parts from Mr. Charles Papert as well as some custom pieces I made and a variety of othermanufactured parts. It started life as a FlyCam 6000 and now the only thing left from the originalFlyCAm is part of the top stage and the Arm.Reason for sale: My back and knees are starting to fail.Included Items:• Steadicam (Cinema Products) Vest (The vest will come with the modified socket blockinstalled for use with the ProAim 6000 Indicator Arm and the original steel Steadicamsocket block)• ProAim 6000 Indicator Arm - Modified to use standard 5/8" arm posts. Arm is set up for heavy load outs 35-60lbs.• Two 5/8" arms posts• 1.5" center post (Modified Calumet Mono Pod, 2-Section Expandable with quickrelease/lock) (Internal 7 lead SD cable with LEMO connectors).• Custom upper and lower J / D boxeso Lower box has V-Lock battery plate (hardwired to box) with forward / aftadjustment.o Two battery inputs for use with included battery hanger (wired with reversepolarity protection)o Dedicated monitor power and Video connectiono Aux power connections (wired for 12v regulation)o FireWire jack (Not wired for use).o Custom Landing gear (Made from PRO parts)o Top box multiple power and video jacks, 5-Pin LEMO with dedicated power/video(was used for my wireless video sender) will include cable for the 5-pin LEMO soyou can rewire for your needs.• Top stage: Steadicam (Cinema Products) early version 3a with one camera plate(forward / aft only adjustments) Mounted to modified ProAim top stage for Left /Rightadjustments.• Gimbal: Custom (3A Type), fully machined from aluminum. (Very well made and smooth)• Battery Hanger - Custom built from PRO parts. Two V-Lock plates (wired for use with thesled) Tube design allows forward / aft expansion and tube can be rotated 90 degrees foralternate weight distribution. Easily removed for transport (One allen screw locks thehanger to the socket on the sled)• Pelican 1730 case with soft and hard foam cut outs. Case holds the sled, vest, arm,monitor, battery hanger, docking bracket and accessories.• Really ugly, but usable custom (aluminum and steel) docking bracket with balance stud(5/8"), dock yoke with aircraft pin and arm hanger hook. Fits on any standard C-stand or5/8" stud.NOT INCLUDED WITH THIS SALEMonitorCameraBatteriesC-StandCables Link to comment Share on other sites More sharing options...
Recommended Posts