Premium Members Christopher Moone Posted March 4, 2018 Premium Members Report Share Posted March 4, 2018 Had a strange thing happen the other day using the Anton Bauer plate on the back of a red to power the camera from my PRO. It was a Panavised Red with their power back and only one of the lights would turn on and the camera wouldnt power up. Volt meter was getting 14.8 volts from the sled through the plate and a dionic straight to the camera worked fine. Strange ghost in the machine as Ive used that plate countless times in the past. Tried different cables and even differ jumper block below. Any thought on why? Again, getting lots of power from the plate with a volt meter. Quote Link to comment Share on other sites More sharing options...
Premium Members Alan Rencher Posted March 10, 2018 Premium Members Report Share Posted March 10, 2018 There could be a a short somewhere that you can only detect when connected to the camera's chassis. That, or maybe you have a bad diode or other component that is showing the correct voltage but can't pass enough current to start the camera. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.