Premium Members Michael Craven Posted November 15, 2018 Premium Members Report Share Posted November 15, 2018 Hello, I'm selling my trusty Preston kit. Its been very reliable, two HU2 two MDR's are being included. I was using all of my cables and my MDR g4 Blue dot on Steadicam, using the studio build's HU3. On the few random jobs I used the HU2's, and they worked fantastically, but the batteries are due for a recall, or an omnishot adapter. Please e-mail me any questions, additional photos are available as well as a PDF of the below inventory. $10,500.00 michaelwcraven@gmail.com HU2’s s/n 2687Transmitter S/N 49764 All buttons, sliders, encoders working nominally. s/n 2791No transmitter All buttons sliders working. Knob not as smooth as 2687 AccessoriesBag of lens marking rings 2x Fast chargers 5x Batteries 4x Charger contact replacements 3x spare antenna Custom long cable for remote iris sliding. DM2 Motors S/N 338119mm swing arm 19mm - 15mm reducer S/N 263319mm swing arm 19mm - 15mm reducer MDR2’s s/n 1555 For use with the HU2’sRunning matching firmware for the HU2’s Works great s/n 2447For use with HU3’s(Not included) Blue Dot G4 upgraded Firmware v1.53 Works great BracketsPro Sled Dovetail 19mm Rod with 15mm reducer Dovetail + other weird one. Spare parts3x spare antenna 3x spare channel select covers. Cables 2x Motor Straight to RA Power1x Y 3Pin Run R/S cable. 2x D-Tap 2x 3pin fischer 1x 3Pin 24v XLR 1x 4pin 12v XLR 1x Pana Power 1x 24v moviecam Fischer Run1x RED BNC 1x Arri 1x 3 Pin R/S 1x Pana CineTape ($600) Serial update cable Link to comment Share on other sites More sharing options...
Premium Members jeromefauci Posted February 7, 2019 Premium Members Report Share Posted February 7, 2019 Would you sell one of the DM2 motors- alone- no PAM or cable- email me : jeromefauci@me.com Link to comment Share on other sites More sharing options...
Recommended Posts