Premium Members Christian Ramirez-Coll Posted December 20, 2018 Premium Members Report Share Posted December 20, 2018 Hello, I am an Atlanta based op. looking for someone who knows how to diagnose if there is some type of electrical problem with the sled, or knows of someone who can do it. I have modified GPI pro SD to HD. The Mods were done by Christian Betz. I figure he can do the job, but I would rather not send it to Germany. The problem comes and goes, so I figure a solder point is loose, or something similar. The sled was perfect until one day I was prepping in a cold carpeted location, and I got an electric static shock so hard the video breaker on the GPI box popped. I had a Modified Shuttle recorder on the top battery mount, Two DIONIC 90s, and one Hytron 140, 24V for the camera, and the junction box with the Standard GPI configuration. After that the rig has not been the same. Any advice? Thank you. Quote Link to comment Share on other sites More sharing options...
Premium Members Deke Keener Posted December 20, 2018 Premium Members Report Share Posted December 20, 2018 You say it hasn’t been the same - what’s it doing? Quote Link to comment Share on other sites More sharing options...
Premium Members Matt Lingerfelt Posted December 30, 2018 Premium Members Report Share Posted December 30, 2018 I'm assuming you changed the fuse out? GPI has made their LEH so that you can swap out the fuse in the amp breaker in case something like this does happen. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.