B I G garage sale...small prices

[Alan G. Kelly SOC]

Short story -our place has become a camera prep lane. Gear everywhere. If my partner trips over one more case she'll send me to the couch. If I trip over one more case I'll send myself to the couch but I can't ...because there's gear on it. You get the picture. Stuff needs to go. Everything is shipping from Toronto, Canada. Understandably I can't run to the post office to get a quote for every item but if you are not in a hurry to get stuff I can ground ship USPS via Canada Post for cheaper.

Socket Block. Missing one screw. Used. I have three arms (Pro/G70/3A) and it fits them all tightly $210 usd.

 

Touch and Go plates. Used. Msrp new approx $90 USD. Selling for $40 usd each for the ones with grip pad on them *from left to right plates #1-3* and $35 usd for the one without *plate #4*

 

C-Stand head. Used. It's ugly and works great. Selling for $5 usd.

 

Counter weights with threaded bolts. Source unknown. Combined weight approx a Dionic 90 and a half. Selling pair for $5 usd.

 

Baseplates. 750 spigot. Used. Selling for $15 usd each or the pair for $20 usd.

 

Precision Camera Battery Belt. Brand new, never used seven-chamber belt. Six of the seven chambers have protective foam lining. Selling for $30 usd.

 

Type E AC plug for you jet setters. 2-pin grounded 16A 220-240 v. Selling for $5 usd.

 

Lazy susan. Made by yours truly. I have two but don't need both. Mitchell sized to fit perfectly on plate if need be. Non-slip padding on both sides. Selling for $20 usd.

 

Shot bags. My logo is on it in sharpie otherwise unused as they were backup bags. $6 usd each or the pair for $10 usd. 

 

Avenger Light Stand with leveling leg. Black Aluminum-alloy. Used. Was my backup lightweight docking stand for tight spaces.  I cleanly sheared a bit off the top of the 750 pin so that it better fit my Hill dock allowing the dock to rest on the o-ring and not pull down so hard as the Hill docks tend to do.  Selling for $80 usd.

 

RED DVI Cable. Brand new. $5 usd.

 

15mm stainless steel rods. 17 1/4" pair $30 usd    8" pair $16 usd    9 1/2" single $8 usd     6" single $5 usd.

 

Misc Items.

1. XLR 4-pin male to 4-pin female 6 ft long $15 usd.

2. 2-pin lemo to D-Tap 12V. 12" $30 usd

3. 4-pin lemo female to 5-pin lemo male 9"  $30 usd

4. Right-angled 4-pin lemo to 12 pin fischer *I think* 19" $20 usd 

5. 2-pin male to 2-pin male lemo 12V $30 usd

6. 15mm rod bushings. In think it came from a Bartech set *will not fit Jerry Hill 5/8 rod motor clamps* $10 usd

7. HVX 200 bracket $5 usd

8. Bracket of unknown origin with sliding 1/4 20 and 3/8 threaded piece $30 usd

9. Receiver bracket for v-shaped male piece. $15 usd

10. 15mm-sized rod bracket of some kind. $10 usd

11. Preston MDR1 plate $10 usd

12. Part unknown $3 usd

13. Mini 15mm threaded rod extension. $5 usd

14 Uniclamp knock-off. I can't get it to work well. Maybe you can. $5 usd

15. Jerry Hill 5/8" PAM arm. $30 usd

16. Jerry Hill 15mm PAM arm. $30 usd

 

Can message me here or at alankellycamera@gmail.com.

 

Thanks.

 

 

 

 

[Alan G. Kelly SOC]

Socket block and 2-pin lemo to D-tap sale pending.

[Alan G. Kelly SOC]

PAM arms sale pending.

[Alan G. Kelly SOC]

PAM arms sold. Socket block sold. 2-pin lemo to D-Tap sold. 

[Alan G. Kelly SOC]

2-pin male lemo to 2-pin male lemo pending. Grip head pending. Shot bags pending. Battery belt pending. 

[Alan G. Kelly SOC]

Lazy susan sold. 2-pin lemo to 2-pin lemo and C-stand head sold.