Jon Adams Posted April 16, 2019 Report Share Posted April 16, 2019 Hi folks, I have a Pilot HD/SDI rig, and need to use it via HDMI with a DSLR. The standard 7in monitor (Steadicam MSC-200590) powers on but only the SEL button does anything. Once I've selected the HDMI IN signal, it displays a picture, but the UP / DOWN / DISP buttons don't have any effect at all, so I can't change brightness/contrast nor flip the image. It all works fine with an Aputure VS2 monitor, but I prefer the build of the Steadicam unit. I haven't tried it via SDI, but Is this normal over HDMI, or does my monitor have a problem? Appreciate any advice you can give. Quote Link to comment Share on other sites More sharing options...
Jon Adams Posted May 1, 2019 Author Report Share Posted May 1, 2019 If anyone has this monitor (Steadicam MSC-200590) would they be kind enough to plug in an HDMI cable and see if theĀ DISP/UP/DN buttons do anything? Thanks. Quote Link to comment Share on other sites More sharing options...
Peter Rimkus Posted March 25, 2020 Report Share Posted March 25, 2020 You need to hold down the SEL button for a few seconds to get the menu to come up. Then you can use the up and down buttons to scroll. Took me forever to figure all this out as well. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.