Regis Robles Posted June 27, 2019 Report Share Posted June 27, 2019 Excuse me, I'm using google translate. Typically operating a Zephyr steadicam that supports 10 kg, it needs to fly with a load of approximately 11.5 kg. Our staff will travel far and we can not rent bigger equipment. My question is: Can I use a G50 arm? Will I have a problem with the gimbal or the socket block? Thank you for your comments. Quote Link to comment Share on other sites More sharing options...
Moderators Louis Puli SOC Posted June 27, 2019 Moderators Report Share Posted June 27, 2019 Firstly have you tried to balance your camera on the rig? I would power everything from the rig .Do you have 2 battery plate on your rig ? As you have pointed out Yes the socket block on the Zephyr is smaller on the vest and also the Arm post is larger on the G50 so you will need 2 things for this to work . I have seen an adaptor for the Zephyr vest to upgrade it to a larger arm block.You will need a machinest make you a arm post cut down to size.I would contact Tiffen first as they may have both items or would know were to get them All the best Louis Puli . Quote Link to comment Share on other sites More sharing options...
RobinThwaites Posted June 28, 2019 Report Share Posted June 28, 2019 Hi Regis You CAN use a G-50 arm but as Louis says you will need a large socket block for your vest. The G-50 is available with the 1/2" arm post that will fit. My concern is that by knowingly overloading the sled you may do damage to some other component like the gimbal, gimbal yoke or stage to post junction. Also you will need to make the post very long top balance that load meaning that you could see vibration. Robin Quote Link to comment Share on other sites More sharing options...
Regis Robles Posted June 28, 2019 Author Report Share Posted June 28, 2019 Hello Louis, thank you for replying. I have not set up the device yet because I know I need an update for this load. Yes, the device already has two battery cards. I'm going to look for the correct socket block and the arm post I can do here. I send news. Quote Link to comment Share on other sites More sharing options...
Regis Robles Posted June 28, 2019 Author Report Share Posted June 28, 2019 Hi Robin, I will use two batteries below and hope not to lengthen the pole too much. I will make these updates and I will be worried about the fatigue of the gimbal. It is not for long and it is for a good cause. I'll keep you informed, thank you! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.