Premium Members Marco Dardari Posted November 17, 2019 Premium Members Report Share Posted November 17, 2019 Hi, for a few day I have a problem with Volt on my Clipper324: I turn on the control box as I have always done by aligning the gimbal for the correct reading of the encoder pan position but when I turn on the motors the gimbal begins to float like when you don't make a correct registration. After several attempts I can start the system correctly. This happens to me more and more frequently. For a couple of days it has happened to me even when the system starts correctly between a motor pause and another. Depends on what? From the encoder cable? From the gimbal cable? Or does it depend on something else? Quote Link to comment Share on other sites More sharing options...
Lisa Sene Posted November 27, 2019 Report Share Posted November 27, 2019 Hi Marco, Any new findings? Did it happen to be cold outside? I've seen a Volt misbehave a bit in cold weather, though it typically corrected itself after a quick off/on and realignment. Lisa Quote Link to comment Share on other sites More sharing options...
Premium Members Marco Dardari Posted November 27, 2019 Author Premium Members Report Share Posted November 27, 2019 Hi Lisa, Tiffen tells me it could be the pan encoder sensor, but I haven't managed to get one yet. Marco Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.