Jump to content

Parts & Monitors & Docks & Plates!


Recommended Posts

  • Premium Members

Since I have some forced downtime, just like everyone else, I’ve gone through some gear that I could use to get rid of. Everything is priced accordingly with global circumstances at the moment.

 

Item 1: SmallHD 702 Bright Monitor (1)

This monitor was bought as backup-of-a-backup, and while it has been used, it hasn’t been abused. The back looks almost brand new. It does have a couple of little marks on the screen, but they aren’t visible once powered on. Includes a SmallHD LEMO to LP-E6 dummy battery (which has been disassembled and glued back together to fix a design issue, see pictures). 

$500

97387295-1161-4552-9A01-5FFAAD6F9BAB.jpeg.d9969a72aa9cf62abcce0658c96118af.jpeg8DA4D933-761C-459B-B9E1-84BC61A6878E.jpeg.0afa0489432e8d65df1bb2c1d2217bbd.jpegC888C6F3-F6AD-4C3E-AA35-A17420C55BD7.jpeg.7b7844b11c330a1872b2b593f14e54bc.jpeg

Item 2: SmallHD 702 Bright Monitor (2)

This monitor was my primary Steadicam monitor for a few years before I upgraded to the 703, and it shows the use. The outer casing is worn, and some of the “soft rubber” on the plastic parts is worn off completely. There are no marks on the screen (always had a screen protector on it), but it has developed a bit of a bright spot in the middle of it (see picture) Also includes LEMO to LP-E6 dummy battery, also with some marks from the surgery performed on it. 

$400

7D2A18BC-915A-4BD8-BC72-D4A9AB2A9EFE.jpeg.55dbbbe4e53d08b34b250b356bd634b4.jpeg874FAD5F-D382-4B20-A235-ED06CCC4F31F.jpeg.a9dc3c38ff76ff5864b54fb95860674e.jpegF9AEF44F-71D1-4885-A86E-2829E0DE2219.jpeg.5b607e37410085cfbc257eb7c6208720.jpeg

Item 3 & 4: Steadicam Dovetail to Tripod Plates

These are 2 prototype Steadicam-to-sticks adapters that I made up a couple of years ago. They accept any full-sized Steadicam dovetail, and have 3/8” holes on the base for mounting a tripod quick release plate to. Extremely handy, and because these are my design, I ensured that they lock down extremely tight. No slipping, unlike some of the commercially-produced other ones! They are a little rough (I wasn’t interested in finish, just function), and not without their quirks, but they’ve worked really well. Only selling because I’ve replaced them with newer versions, and figured these could help someone who didn’t have any, rather than having 6 for myself!

$100 each

AD99E3DC-ABC3-487A-AD2F-9E64351C9361.jpeg.4529cf885e6e24d193b9ee82f4625bd7.jpeg1EF6D8E8-D2ED-4C45-B5C2-80AA1B9B01A8.jpeg.65cf9e7f5ce0ed793cb5ac6e8f55f911.jpeg

Item 5: Steadicam 3/3A parts

Here’s something I put together as the start of a project, but don’t have the time to finish. It’s a Model 3 stage and plate, a side-to-side addition (maybe DeRose?), a Model 3 extension post, and a Model 3 gimbal, which I recently gutted, cleaned, and re-lubricated with the same oil I use for my M-1 gimbal. Would be a great start to a sled project, or a running rig!

$800

4EA808EE-FF54-44CB-9D56-9A25E514F473.jpeg.428b58f468015247cdf8b737ef7c2465.jpeg

Item 6: Custom 1.5” - 5/8” Dock

This came with the rig above (and I’d prefer to sell it with), and is beautifully machined. Some history behind who made this, I’d be happy to share with the buyer. Includes aircraft pin and all the works. Discount available if you want to buy this and the sled parts!

$250

 

Contact me at willsvideo@gmail.com if you’re interested!

Link to comment
Share on other sites

×
×
  • Create New...