peter keeling Posted August 22, 2020 Report Share Posted August 22, 2020 Im curious if anybody knows of a tool to help tighten and loosen the threaded collar that connects a 1.5" MKV Carbon Fiber post to the D-Box below. I have a dickens of a time ensuring its properly tight with just my hands. A handy tool would surely help, not sure if anybody has come across one that would work. Quote Link to comment Share on other sites More sharing options...
Premium Members Tom Wills Posted August 22, 2020 Premium Members Report Share Posted August 22, 2020 I would probably use a strap wrench. While I’m sure you could use a castle wrench, a strap wrench will be a bit more universal. Also, if you’re finding that you’re getting play between the D Box and the post, that may be from the edges of the flats on the post connector being rounded over, and I know in the past I helped someone by shimming that with some thin layers of tape to make it more solid. Quote Link to comment Share on other sites More sharing options...
Premium Members Robert McGregor Posted September 29, 2020 Premium Members Report Share Posted September 29, 2020 If you are still getting play then also check you have it on right. Spin the top or bottom section 180 degrees. The older MKV model was directional. If it was wrong there would be tiny bit of play. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.