Premium Members jeromefauci Posted November 16, 2020 Premium Members Report Share Posted November 16, 2020 The Steadicam Series from Camplex series features 4.2mm diameter hybrid fiber cable, half the size of traditional studio SMPTE, and an allowable minimum bend radius of 1 inch. This makes these cables especially well suited for jib operators, portable broadcast cameraman and patch panels scenarios where weight bend radius are often a consideration. These special fiber/copper composite cables consist of two tight buffered singlemode optical fibers. These are cabled around a jacketed stranded steel strength element, with an overall tinned copper braid, 80% min coverage, and a black Dura-FlexTM jacket. Terminated in our LEMO Certified shop with FUW and PUW connectors, the HF-STEADICAM is a reliable short distance interface between the camera and standard SMPTE cables for transmitting signal. NOTE: Check camera and Steadicam platform type to determine power cable requirements before ordering. Camplex HF-STEADICAM SMPTE jumpers are designed to operate with local power. These assemblies use lighter AWG power conductors and may not be suitable for all applications where the power is provided by the CCU.. The length is TEN FEET the maximum length for most light fiber systems - this "jumper" cable is compatible with most light fiber systems in Sitcoms, and live events- it connects to the larger diameter ridged fiber cables from the live truck or studio video controller that would make Steadicam impossible. its in very good condition - cost over $1300.00 new ASKING $575.00 EMAIL ONLY: jeromefauci@me.com Link to comment Share on other sites More sharing options...
Recommended Posts