Jump to content

Custom 6” Inovativ Steadicam Stand Wheels


Recommended Posts

  • Premium Members

These were a (very expensive - around $1000 new) custom ordered set of wheels that I had Inovativ make for me. These wheels fit an American Steadicam Stand, and are the 6” wheels from the Scout 31”. The wheels roll beautifully, and were great for blocks and blocks of New York streets (as you can see from the wear on the anodizing). The locks are the most solid I’ve ever seen on any wheels - if you have an Inovativ cart, these are the same. They really felt like the Goldilocks wheel - big enough to roll over cables and sidewalks, but not so big as to make the stand impossible to use in small locations. 

Several people have tried to buy these from Inovativ, but it seems I’m the only person to sneak in a custom order before they decided not to do it anymore!

As to why I’m selling, because I believe in being up front with potential buyers - my complaint with these wheels is that they don’t change direction very well. If the wheels are all oriented in one direction, and you need to push it in the opposite direction, it takes a lot of force, and it was difficult for some of my smaller assistants to do. So I’ve moved to a different wheel system that works better for my assistants, and I’m passing this one on. 

Please do note that these are in “as-used” condition. There’s some surface rust inside the tubes, there’s dust, dents, and dings, and there’s plenty of discoloration on the light grey tires. They’ve been used hard for 2 and a half years, but they still work as well as they did on day 1.

Email me for more info. Willsvideo@gmail.com.

AD58A7B6-352F-432B-BB79-B20029A59338.jpeg

Link to comment
Share on other sites

×
×
  • Create New...