Premium Members Jarrett P. Morgan Posted February 15, 2021 Premium Members Report Share Posted February 15, 2021 (edited) On a roll of re-making the accessories I made over the summer on the manual mill in CNC. Since I am remaking them for myself and going through the process of design and CAM I figured I would keep offering them to folks if they want them. A Volt Nose cheeseplate: Has 16 1/4-20 threaded holes and two 3/8-16 holes with indexing for arri pins. The 3/8 holes are arri standard 50mm spacing, while the center 1/4- 20s are arri standard 9mm spacing. Attaches to the front of the volt via four countersunk stainless bolts (supplied with the cheeseplate) The plate is thick enough for at least all the accessories I have to not hit the volt behind, while thin enough to be as light as possible: only 33 grams with the four countersunk bolts. Lots of options of things to mount, but my go-to is a short smallrig nato rail. I used the nato rail monitor mount from smallrig to have a really quick anti-rotation low mode monitor mount. The cheeseplates will be black anodized. $80 dollars plus shipping. Please email me at jpmsteadi@gmail.com if you are interested. Custom modifications can be accommodated. Edited February 15, 2021 by Jarrett P. Morgan Link to comment Share on other sites More sharing options...
Premium Members axel ebermann Posted March 1, 2021 Premium Members Report Share Posted March 1, 2021 nice !!! Link to comment Share on other sites More sharing options...
Recommended Posts