Premium Members Emanuele Chiari Posted August 16, 2021 Premium Members Report Share Posted August 16, 2021 (edited) Are there any known iusses switching the M2 sled from 12V to 24V when powering the Volt ? Thanks Edited August 16, 2021 by Emanuele Chiari Quote Link to comment Share on other sites More sharing options...
Premium Members Taras Nebesnyy Posted January 2, 2022 Premium Members Report Share Posted January 2, 2022 Hi, did you ever find out the 24v power on volt? Quote Link to comment Share on other sites More sharing options...
Christopher Roe Posted January 3, 2022 Report Share Posted January 3, 2022 As far as I have found out as long as the cable isn’t set for 24v power it shouldn’t pass through. I have 12/24v set up on my clipper 2 and it will only power 24v if the cable is wired for 24v. You can see if the cable is by simply removing the lemo connector and checking which cable is where. There should be an open port that is for 24v. But to double check it wouldn’t hurt to take a volt meter to the power ports and check 1 Quote Link to comment Share on other sites More sharing options...
Cathal Mac Reamoinn Posted June 13, 2022 Report Share Posted June 13, 2022 A On 1/3/2022 at 1:01 AM, Christopher Roe said: But to double check it wouldn’t hurt to take a volt meter to the power ports and check A volt on a volt... volt ² Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.