Jump to content

Garage Sale - Betz Receiver, 3A Gimbal & Dovetail, Connectors, Cases, AB Plates, V-Lock Plates, Paralinx Tomahawk, and Much More


Recommended Posts

  • Premium Members

Hi All... have a bunch of stuff avail for sale.  Have pictures for some, but feel free to reach out with questions etc.  Its all used... please feel free to make an offer on anything.

1. I have an interesting carbon fiber erector set... if you're into prototyping or have a use.  It was used to build the prototype head for the SuperFlyCam but since decommissioned and disassembled.  Pretty cool. See pics.

2. I have a custom case that turns into two trays that can hang off the leg straps of an American stand.  Used to use it instead of a cart. Must be an American stand with the narrower leg straps, and it comes with a special collar that you install on the stand to capture the trays.  Comes with foam that's cutout to accommodate batteries, and the other tray works great for brackets.  Also included is a push bar for the stand (assuming you have wheels on it) so you can push the stand around.  The push bar has a flight pin to allow it collapse.  See pics.  

3. Battery plates...(5) AB Gold mounts, (2) AB to V-Lock, (4) V-lock plates, and (2) AB Gold male plates.

4. Lemo connectors. I have a ton of them used and new. If interested please let me know!  Can breakout a list and/or send picts.

5. Ken-lab 24v inverter (guts only).  I used this inside some custom electronics.  Think they run about $100 new.  

6. I have a few cases avail.  They are on eBay... here's the link.  https://www.ebay.com/usr/tophatprod happy to take anything down and make a deal.  

7.  Have two Watson sensors for tinkerers.  Also on eBay. https://www.ebay.com/usr/tophatprod

8. 3A Gimbal 

9. 3A Dovetail plate

10. Also have a bunch of Preston compatible micromos & some slip rings.  

11.  F-Stop single channel 900GT with an fStop remote transmitter that uses a Preston iris knob as its controller. 

12.  I have some heavy geared head wheels.  Not sure compatibility.  Gold color.  

13.  Have some pelican parts (latches and replacement handles) contact me if interested.  Not much value in this... happy to toss it in with something you buy.

14. Telefinder / Cinefinder - have an old carbon fiber video finder.  Its basically an antique.  Comes with a PV and Arri lens mounts.  

15.  Low Mode Handle Clamp

16. MDR-2 to Ultra/Master Bracket

17.  Paralinx Tomahawk Kit - 1x Transmitter, 2x Receivers & an antenna array in a case (pictures coming)

18.  2x Paralinx brackets

19. Gorelock Docking Collar

20. Stand Cart Hangar 

 

 

 

IMG_9136.jpeg

IMG_9137.jpeg

IMG_9138.jpeg

IMG_9139.jpeg

IMG_9135.jpeg

IMG_9134.jpeg

IMG_9140.jpeg

IMG_9141.jpeg

IMG_9152.jpeg

IMG_9148.jpeg

IMG_9151.jpeg

IMG_9150.jpeg

IMG_9149.jpeg

IMG_9146.jpeg

IMG_9147.jpeg

IMG_9153.jpeg

IMG_9154.jpeg

IMG_9155.jpeg

IMG_9156.jpeg

IMG_9157.jpeg

IMG_9158.jpeg

IMG_9159.jpeg

IMG_9160.jpeg

  • Like 1
Link to comment
Share on other sites

  • Premium Members

Cables Available (lengths approximate):

  • 4pXLR to 4pHRS 12v 2' Long
  • 4pHRS to Coaxial DC (originally for redbyte) 6' (2 avail)
  • 4pHRS to Coaxial DC (orginally for redbyte) 6" Long
  • 4pHRS to Coaxial DC (orginally for redbyte) 12" Long
  • 4pHRS to 6pHRS (originally for modulus) 2' Long (2 avail)
  • Preston Serial Cable - 3p Lemo to 9p Serial 
  • Preston Hand Unit Command Cable - 5p Lemo to 5pin Lemo - LONG cable... think its about 25'
  • 2p Lemo to AB - 18"
  • Ultra 3p Lemo to Panavision Power 3p Hermaphodite 18"
  • Ultra 3p Lemo to Red One Power (6p Lemo)
  • Ultra 3p Lemo to 4p 12v XLR 18"
  • Small HD DP7 AC Power Adapter (might work for other Small HD monitors)
  • AB to Small HD 6pHRS Female 36" (3 avail)

Contact me with reasonable offers.  

Link to comment
Share on other sites

  • Premium Members

OK went through my connector and cable inventory and here's what I have lying around.  I put in some pricing... but I'm eager to get this stuff out the door and give it a new home... so feel free to make an offer.  

 

 

Connectors - Used with pig tails (50% less than new)

  • AB x 2
  • 2pin Lemo-Style off brand… like FGG.0B $20
  • Lemo FHG.0B 4pin Right Angle $35
  • 6pin Lemo-Style off brand… like FGG.0B $20
  • Lemo FGG.0B 7pin x 7pc avail $20
  • Lemo FGG.1B 3pin $20
  • Lemo FGG.2B 7pin (crimp style) x 3pc avail $35
  • Lemo FHG.2B 7pin Right Angle (crimp style) x 2pc avail $75
  • Lemo FGG.2B 10pin $35
  • Fischer 3pin (RS) x 2 pc aval
  • Fischer 11pin
  • Lemo PHG.0B 2pin (female) - great for making 2pin extension $20
  • Lemo FJG.3B 8pin female (F35 power connector) $50
  • Lemo FFA.1S 2pin Hermaphodite $20

 

Connectors - New (20% less than new)

  • Lemo FGG.1B 6pin (crimp style) x 3 avail $30
  • Lemo FGG.2B 3pin (solder style) $45
  • Lemo FGG.2B 7pin (crimp style) x 4 avail x $55
  • Lemo FGG.2B 10pin (crimp) $65
  • Fischer 5pin x 2
  • Lemo FGJ.1B (Red Power - female - solder) $35
  • Lemo EGG.2B 7pin (chassis mounted - crimp style) $45
  • Lemo EGG.2B 10pin (chassis mounted - crimp style) x 2 avail $45
  • HRS 4pin Female Chassis Mounted Connector (crimp) x 2 avail $5 (only when buying other stuff)
  • HRS 4pin Male Cable Mounted Connector (crimp) $5 (only when buying other stuff)
  • Lemo PHG.0B 2pin (female) - great for making 2pin extension $25

 

 

Used Connectors - No cables (50% less than new)

  • Lemo FGG.0B 4pin (solder) x 3pc avail $20
  • Lemo FGG.0B 5pin (crimp) $20
  • Lemo FGG.0B 6pin (solder) $20
  • Lemo FGG.0B.7pin (solder) $20
  • Lemo FGG.1B 2pin (solder) x 2pc avail $20
  • Lemo FGG.1B 3pin (solder)  $20
  • Lemo FGG.1B 4pin (solder) $20
  • Lemo FGG.1B 5pin (solder) x 2pc avail $20
  • Lemo FGJ.1B 3pin Female (solder) x 2pc avail $25
  • Lemo FGG.2B 5pin (solder) x 5 avail $30
  • Lemo FGG.2B 12pin (solder) $35

 

Cables Available (lengths approximate): (50% less than new)

  • 4pXLR to 4pHRS 12v 2' Long - $25
  • 4pHRS to Coaxial DC (originally for redbyte) 6' (2 avail) - $20
  • 4pHRS to Coaxial DC (orginally for redbyte) 6" Long - $20
  • 4pHRS to Coaxial DC (orginally for redbyte) 12" Long - $20
  • 4pHRS to 6pHRS (originally for modulus) 2' Long (2 avail) $30
  • Preston Serial Cable - 3p Lemo to 9p Serial $35
  • Preston Hand Unit Command Cable - 5p Lemo to 5pin Lemo - LONG cable... think its about 25' $50
  • 2p Lemo to AB - 18" $35
  • Ultra 3p Lemo to Panavision Power 3p Hermaphodite 18" - $75
  • Ultra 3p Lemo to Red One Power (6p Lemo) - $75
  • Ultra 3p Lemo to 4p 12v XLR 18" - $45
  • Small HD DP7 AC Power Adapter (might work for other Small HD monitors) $70
  • AB to Small HD 6pHRS Female 36" (3 avail) $60
Link to comment
Share on other sites

  • Premium Members

Adding to this… pelican dividers avail.  Want to sell them as a lot… here’s a list and pics.  
 

28x 4”W with folded flap at top

25x 4”W by 5”H

3x 5.5”W x 3”H

9x adjustable 4-7”W x 5”H

2x 3”W by 3.5”H

1x 3.25”W x 5”H center Velcro 

Large Case Divide 6.5”H x 20.5”W

641E66EC-F806-4D90-BB21-14489295993D.jpeg

202FDF64-EA0D-4E7B-AFF4-B085E1495585.jpeg

0A8EAF7B-DFE4-4939-A289-69ECD873EE7E.jpeg

C1BFBFF7-0A79-42DF-9B42-C9E000C2FB5F.jpeg

CDB8D122-24B5-46E3-A999-025CEFE4633C.jpeg

779A8921-20E0-4DDE-8DF8-81E5F8A10EF2.jpeg

Link to comment
Share on other sites

  • Premium Members

Updated list with items marked sold:

1. SOLD carbon fiber erector set.

2. SOLD custom case that turns into two trays 

3. SOLD Battery plates...(5) AB Gold mounts, (2) AB to V-Lock, (4) V-lock plates, and (2) AB Gold male plates.

4. Lemo connectors. Avail… see list above 

5. Ken-lab 24v inverter (guts only).  I used this inside some custom electronics.  Think they run about $100 new.  

6. Some still avail…  I have a few cases avail.  They are on eBay... here's the link.  https://www.ebay.com/usr/tophatprod happy to take anything down and make a deal.  

7.  Have two Watson sensors for tinkerers.  Also on eBay. https://www.ebay.com/usr/tophatprod

8. (Interested Parties) 3A Gimbal 

9. 3A Dovetail plate

10. One Sold… Preston compatible micromos & some slip rings.  

11.  F-Stop single channel 900GT with an fStop remote transmitter that uses a Preston iris knob as its controller. 

12.  (Interested parties) I have some heavy geared head wheels.  Not sure compatibility.  Gold color.  

13.  Have some pelican parts (latches and replacement handles) contact me if interested.  Not much value in this... happy to toss it in with something you buy.

14. Telefinder / Cinefinder - have an old carbon fiber video finder.  Its basically an antique.  Comes with a PV and Arri lens mounts.  

15.  Low Mode Handle Clamp

16. MDR-2 to Ultra/Master Bracket

17.  Paralinx Tomahawk Kit - 1x Transmitter, 2x Receivers & an antenna array in a case (pictures coming)

18.  2x Paralinx brackets

19. SOLD Gorelock Docking Collar

20. (Interested parties) Stand Cart Hangar 

21. SOLD Cheese plate

22. pelican dividers 

Link to comment
Share on other sites

  • Premium Members

Adding to the list… lightweight aluminum electronics boxes I fabricated… currently empty… but originally housed gyro inverters.  Clearances for xlr connectors, lemo 0B, and power switch.  Dovetails allow for stacking and for sliding onto Tiffen style plates or the bottom of Ultra/Master sleds. 

E0EA4A50-C805-4789-A14A-2A485E0E7B75.jpeg

33CE3A42-285E-4B3B-A98B-E551C99552DC.jpeg

4F37C307-2642-4876-95C8-37DDF4E956AF.jpeg

Link to comment
Share on other sites

×
×
  • Create New...