Jump to content

ACC connector Transvideo Monitor


Alberto Ojeda

Recommended Posts

  • Premium Members

Helo guys!!

Since long time ago, I saw in my Transvideo monitor that the ACC connector it have the 4 first pines to power + vídeo, but I don't know how it work the video side.
I tried to understand it with the monitor users manual, but I couldn't.

My sled is the RIG Betz, and it have a MONITOR connector at the bottom, so if I plug the SDI from the camera to the top stage bnc, do the electronic of my sled convert the HD image to have video trough this MONITOR connector at the bottom of my sled?

So if I plug a 8 pins lemo cable from the bottom of my sled, to the 8 pins lemo ACC connector to the monitor, do I have power and HD video with one cable without SDI cable?!

I hope I'm clear with this doubt, so thanks so much in advance!!

966577940_Capturadepantalla2021-11-24alas19_09_47.jpg.cc874fb0261cd9d305c767272f88ab7e.jpg

Link to comment
Share on other sites

Hi Alberto, 

Usually, that 8pin monitor lemo on the bottom of sleds is for power and analogue video, not HD-SDI, and should be tied to the analogue input on your top stage. 
On your ACC port on the monitor, you can see pin 3 (Y/CVBS) is an analogue video input.
So unless you're using an analogue outputted signal at your camera, eg film camera with sd tap, you can't send HD-SDI signals that way, so it's 2 cables I'm afraid!

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...