Premium Members David M. Aronson Posted January 10, 2022 Premium Members Report Share Posted January 10, 2022 Selling an old project sled. Never got around to doing anything with it then hung the vest up after an injury. OG Ultra 1. I think this was the first sled that Tiffen made under the Steadicam brand. Was their flagship for a while. Unsure of weight capacity, but based on the cameras of the time it would have to up in the 40-55lbs range. Takes a single Anton Bauer Battery. Doesn’t included a monitor, but comes with rods for it. I don’t have the cables to test it, but there’s a green light when I flip it on and no smoke comes out. No SDI up and down the post. It’s all analog despite the “HD” labels on some of the connectors. I intended to wire it for HD but never found the time. Some cosmetic damage on it and moving the top post and battery bracket is a touch stiff, but manageable. Battery bracket is missing a foot(Included). Some wear on the gimble from where the handle meets it. Light surface rust on some screws, but nothing significant. Gimbal itself is in good shape. Held true last I tested it. No rough spots and spins freely. The grip was replaced at some point with the ultra 2 design as the clamp doesn’t match the rest of the sled. This was common on the old master series and ultra 1 sleds as the old clamp had a tendency to snap. Top stage moves smoothly and freely across the entire range. dovetail plate holds firmly without slipping Email DCSteadicam@gmail.com Asking $6200 NET OBO, Paypal, Apple pay, Venmo, or Cash if local pickup Shipping to CONUS only please Link to comment Share on other sites More sharing options...
Recommended Posts