Jump to content

XCS Ultimate 2 Sled, Transvideo Cinemonitor HD6, Optional Broadcast Accessory Kit


Recommended Posts

  • Premium Members
-XCS Ulitmate 2 Sled with SMPTE upgrade ($1500USD performed by Greg Bubb)
Sled also wired to accommodate full broadcast build with 2pin lemo tally pass-thru on top stage and LEH.
19" to 32" 2" post length
2x HDSDI video lines
1x Analogue video input which outputs to 8pin power/video, BNC, and 4pin lemo 12V/video on the LEH (lower housing)
-XCS Monitor Bracket
-XCS Sliding LT dovetail plate
-XCS Spare bits kit Including gimbal tool, screws, Kipps, and LEH balance adjustment rods.
-Transvideo Cinemonitor HD6 with 8pin power cable
-CamJam monitor bracket/Yolk
-2pin XCS to 4pin female XLR camera power cable
-Silver Anvil Case
 
$16000.00 USD
Buyer Pays Shipping
 
 
OPTIONAL
Broadcast kit:
G-zoom zoom/focus unit with Fuji adapter.
Stanton Focus Motor kit
2x BFD units to power Stanton Motor including Xcs to BFD cable.
2x analogue return monitors
1x 5"SDI return monitor with bracket
1x 7" SDI return monitor or also can be used as a Prompter Monitor
Broadcast Kit: Add $1500.00 USD
 
 
Kit is located in Toronto, Canada
 

IMG_7110.heic IMG_7111.heic IMG_7112.heic IMG_7113.heic IMG_7115.heic IMG_7116.heic IMG_7118.heic IMG_7119.heic IMG_7120.heic IMG_7121.heic IMG_7123.heic IMG_7126.heic IMG_7127 2.heic IMG_7128.heic IMG_7131 2.heic IMG_7132.heic IMG_7133 2.heic IMG_7137.heic IMG_7138.heic IMG_7139.heic IMG_7140.heic IMG_7141.heic IMG_7142.heic IMG_7143.heic IMG_7144.heic IMG_7145.heic IMG_7146.heic IMG_7147.heic IMG_7148.heic IMG_7149.heic IMG_7151.heic IMG_7153.heic IMG_7154.heic IMG_7155.heic IMG_7156 2.heic IMG_7157 2.heic IMG_7159.heic IMG_7164.heic IMG_7109.heic IMG_7107.heic IMG_7106.heic IMG_7105.heic IMG_7104.heic IMG_7102.heic IMG_7100.heic IMG_7099.heic

Edited by Bryan Trieb SOC
  • Like 1
Link to comment
Share on other sites

×
×
  • Create New...